felton industries DELUXE GRANDSTAND FEL6DG User manual

3
3
3
2
2
1st frame
2nd frame
4th frame
3rd frame
5th frame
2
End cap
12
12
4
3
2
5
7
89
11
12
10
6
8
11
6mtr DELUXE GRANDSTAND
[Code No: FEL6DG]
Attach five strut bars
7
between 1st and 2nd base frames, then attach the remaining one strut
bar
7
at the top tier position between 4th and 5th base frames. Use bolts
11
washers
9
,
and nuts
10
to fasten all strut bars to the base frames.
Attach four back railings
4
between upright bars in step 1 to connect all subassemblies
together. Use bolts
11
, washers
9
, and nuts
10
to tighten them up as illustrated.
Attach five upright bars
2
&
3
to the back of base frames
1
by using bolts
8
, washers
9
, and nuts
10
as illustrated. Ensure all fasteners are attached at the right positions on
upright bars. Note that end upright bars
2
have 6 holes at the back compared to 4 holes on
the middle upright bars
3
1
1
Attach two top side railings
5
and two bottom side railings
6
onto 1st and 5th base frames
by using bolts
8
, bolts
12
washers
9
, and nuts
10
as illustrated. Then fasten all side
railings
5
and
6
together by using bolts
11
washers
9
, and nuts
10
ITEM DESCRIPTION Qty
1 FEL6DG_BASE FRAME 5
2 FEL6DG_MAIN UPRIGHT BAR - END 2
3
FEL6DG_MAIN UPRIGHT BAR - MIDDLE
3
4 FEL6DG_BACK RAILING 4
5 FEL6DG_SIDE RAILING - TOP 2
6 FEL6DG_SIDE RAILING - BOTTOM 2
7 FEL6DG_STRUT BAR 6
8 AS-NZS 2465 Bolt - 1/2" x 7" 14
9 AS-FLAT WASHER - 1/2" 128
10 AS-NZS NYLON Nut - 1/2" 64
11 AS-NZS 2465 Bolt - 1/2" x 3.5" 26
12 AS-NZS 2465 Bolt - 1/2" x 3" 14
ASSEMBLY INSTRUCTION
Thank You
FOR CHOOSING FELTON INDUSTRIES
"This product has been
manufactured in Australia to the
highest quality standard,
guaranteeing proven quality,
durability and low maintenance"
Felton Industries Pty Ltd | ABN: 17 130 687 240
1 2
3 4
[email protected] www.felton.net.au
1800 22 00 55 1800 05 91 58
WARNING: This assembly required two or more people as lifting is involved. Please ensure bolts and nuts are only finger-tightened
throughout assembly for flexibility in lining up components . Bolt and nuts should be securely tightened in place when instructed to
do so. Please check all components are included before proceeding with the assembly
Page 1 of 2

16
14
15
20
19
21
20
14
15
16
17
13
18
19
20
21
26
24
22 23 25 27
6mtr DELUXE GRANDSTAND
[Code No: FEL6DG]
Fasten all skirting boards
19
,
20
,
21
firmly onto vertical tubes on all base frames by using self-
tapping screws
27
. Tighten all hexagonal head bolts with spanners and appropriate tools. Then
attach the whole assembly to the ground by using M12 dyna-bolts preferably, on each frame lug.
Attach four support bars
17
and eight flat bars
18
to the back of base frames by using bolts
26
,
washers
9
, and nuts
10
as illustrated.
Fasten all planks onto base frames by using bolts
24
and nuts
25
as illustrated. Note that four seat
planks
14
to be fastened on 1st, 2nd, 3rd & 4th seating tiers, two seat planks
15
to be fastened on
5th seating tier, and sixteen tread planks
16
to be fastened at foot rest positions.
Attach four stair steps
13
between 4th and 5th base frames by using bolts
22
and nuts
23
as illustrated.
ITEM DESCRIPTION Qty
13 FEL6DG_STAIR STEP 4
14 FEL6DG_SEAT PLANK L4860 4
15 FEL6DG_SEAT PLANK L2960 2
16 FEL6DG_TREAD PLANK L3075 16
17 FEL6DG_REAR SUPPORT BAR 4
18 FEL6DG_AL FLAT BAR 50x6xL1735 8
19 FEL6DG_AL SKIRTING L3000 4
20 FEL6DG_AL SKIRTING L1500 5
21
FEL6DG_AL SKIRTING L1500 - NOTCH CUT
3
22 AS 1112 Bolt - 3/8" x 3" 16
23 AS 1112 Nut - 3/8" 16
24 AS-NZS 2465 Bolt - 1/4" x 1" 244
25 AS-NZS NYLON Nut - 1/4" 244
26 AS-NZS 2465 Bolt - 1/2" x 8" 10
27 AS-Screw-ST4.5x25 56
ASSEMBLY INSTRUCTION
Thank You
FOR CHOOSING FELTON INDUSTRIES
"This product has been
manufactured in Australia to the
highest quality standard,
guaranteeing proven quality,
durability and low maintenance"
Felton Industries Pty Ltd | ABN: 17 130 687 240
5 6
7 8
[email protected] www.felton.net.au
1800 22 00 55 1800 05 91 58
WARNING: This assembly required two or more people as lifting is involved. Please ensure bolts and nuts are only finger-tightened
throughout assembly for flexibility in lining up components . Bolt and nuts should be securely tightened in place when instructed to
do so. Please check all components are included before proceeding with the assembly
Page 2 of 2