Feniex P-1519 User manual

FENIEX // V1.3 // INSTRUCTION MANUAL
WEB // www.feniex.com
Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted Feniex material. Laws in the
United States and other countries preserve for Feniex Industries and its licensors certain exclusive rights for copyrighted material, including the
exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted
material of Feniex and its licensors contained herein or in the Feniex products described in this Price List may not be copied, reproduced,
distributed, merged or modied,transmitted, transcribed, stored in retrieval system or translated into any language or computer language, in any
form or by any means, without prior written permission of Feniex Industries, Inc.. Feniex and the stylized Feniex logo are registered in the U.S.
Patent & Trademark Oce.
P-1519
INSTRUCTION MANUAL

FENIEX // INSTRUCTION MANUAL
WEB // www.feniex.com
2
TM
Safety Regulations 3
Warranty 3
Service after Expiration 3
Copyright 3
Feniex Product Copyright 3
Equipment Dimensions 4
Wiring Diagram 5
Mounting Instructions 6
TABLE OF CONTENTS

FENIEX // INSTRUCTION MANUAL
WEB // www.feniex.com
3
TM
Operational times are from 10 a.m. to 5 p.m.
central time, Monday through Friday. Please
do not send in product without contacting
support rst for a RMA number.
Service After Expiration
Feniex Industries will still provide service for
all products after expiration of the warranty.
For any issues, call the customer support
line. In some instances it may be necessary
for the product to be shipped, freight prepaid
and insured for loss or damage to Feniex
headquarters.
Copyright
This instruction manual and the Feniex
products described in this instruction
manual may include or describe copyrighted
Feniex material. Laws in the United States
and other countries preserve for Feniex
Industries and its licensors certain exclusive
rights for copyrighted material, including
the exclusive right to copy, reproduce in
any form, distribute and make derivative
works of the copyrighted material.
Accordingly, any copyrighted material of
Feniex and its licensors contained herein
or in the Feniex products described in this
instruction manual may not be copied,
reproduced, distributed, merged or modied
in any manner without the express written
permission of Feniex Industries, Inc.
Feniex Product Copyrights
The products described in this document
are the property of Feniex Industries, Inc. It is
furnished by express license agreement only
and may be used only in accordance with the
terms of such an agreement. Products and
documentation are copyrighted materials.
Making unauthorized copies is prohibited by
law. No part of the product or documentation
may be reproduced, transmitted, transcribed,
stored in retrieval system or translated into any
language or computer language, in any form or
by any means, without prior permission from
Feniex Industries, Inc.
Safety Regulations
The following provides all the information
necessary to safely operate the previously
listed products of Feniex Industries, Inc.
Please read this manual thoroughly before
installing or operating your new product
in order to prevent any damage or injury.
Failure to follow the listed instructions in
this manual may result in damage to your
products or personal injury.
• Proper installation of this product
requires good knowledge of automotive
systems, electronics and procedures.
• Please guarantee all vital components
of the vehicle are not in danger of being
damaged by drilling holes necessary
for installation. Check all sides of the
mounting surface before drilling any
holes into the vehicle.
• Do not install this product in any way
that interferes with the deployment of
the air bag. Doing so may damage the
eectiveness of the air bag and can
lead to serious personal and vehicle
injury. The installer will assume full
responsibility of proper installation of the
new unit.
• Please clean the mounting surface
before installation of the unit when using
tape, brackets, magnet, Velcro or suction
cups.
• The product’s ground wire must be
connected directly to the Negative (-)
battery post for eective use of the
unit. Please follow all wiring guidelines
provided to guarantee long lifespan
and productivity. Failing to follow these
instructions may result in damage to the
product.
Warranty
Feniex Industries, Inc. warrants to the original
purchaser that the product shall be free
from defects in material & workmanship for
5 years from the date of purchase for all
LED products. Feniex Industries warranties
speakers, sirens, ashers, & controllers for
2 years.
If a warranty problem occurs, please contact
customer support at 1.800.615.8350 or
visit the web site at www.Feniex.com. If the
product needs to be returned for repair or
replacement, call our customer support line
to receive a return merchandise authorization
number.
Warning! Utilizing non-factory screws and mounting
brackets may result in loss of warranty coverage.
SAFETY REGULATIONS & WARRANTY

FENIEX // INSTRUCTION MANUAL
WEB // www.feniex.com
4
TM
SPECIFICATIONS
Input Voltage: 11 - 27V DC
Current Draw: 14 peak Amps
Fuse 125% of Circuit Draw
SPECIFICATIONS & DIMENSIONS
48”
70”
12”
6.125”
3.25”

FENIEX // INSTRUCTION MANUAL
WEB // www.feniex.com
5
TM
1. In order to power the unit,
extend both the red, 12V(+) wires
to the 12V(+) post of the vehicle’s
battery. Extend both the black
12V(-) wires to the ground post of
the vehicle’s battery. All 4 wires (
2 black and 2 red) must be used
due to the current requirements of
the light.
WIRING DIAGRAM & WIRING
INSTRUCTIONS
Fuse
COLOR FUNCTION POLARITY CONNECTION
Red Positive 12v (+) Latching Switch
Black Ground 12v (-) Chasis Ground
WIRING DIAGRAM

FENIEX // INSTRUCTION MANUAL
WEB // www.feniex.com
6
TM
1. Place the unit against the
selected mounting surface.
2. Mark the areas where the
mounting holes will be drilled. If
the mounting surface is part of
the vehicle, make sure no vital
components could be damaged
by the drilling process.
3. Drill two mounting holes per
bracket in the marked surface.
Use hardware (not provided)
to secure the brackets to the
mounting surface.
MOUNTING INSTRUCTIONS
4. Use the provided
set screws to rmly
position the brackets
to the pole light.
Screw tightly with a at-head
screwdriver to ensure the
brackets are tightened securely to
the pole.
Important! Hardware is sold seperately.
3/8”
3/4”
3”
3”
Mark holes
Note! The above Diagram is not to scale.
Set screw
location