Ferm Ancora 322158 User manual

Assembly manual
Ancora Floor Lamp

General Instructions
PLEASE READ BEFORE INSTALLATION
WARNING:
The safety of this fitting can only be guaranteed if the following instructions are observed during both
installation and use. Please retain these instructions safely after installation.
PLEASE OBSERVE THE FOLLOWING GUIDELINES:
– Ensure that the power supply has been switched o prior to installation or removal of the product.
– Never undertake an electrical installation without the proper know ledge or training. If not familiar
with electrical wiring, contact a qualified electrician.
– The product may in no way be modified or tampered with. Any modification may compromise safety
and make the product itself dangerous to use. FERM LIVING does not accept any responsibility for
products that have been modified.
– This product requires the use of a lightbulb that is not included. Please use a lightbulb that has the
relevant safety certifications and approvals for your area.
– Any modification must be performed only by qualified personnel to avoid any danger.
– This product is meant for indoor use only.
– This appliance should not be disposed in a domestic trash receptacle and should instead be recycled
appropriately.
– If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by
the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
– To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be eectively
fixed to the wall if the wiring is within arm’s reach.
– If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by
the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
CLEANING INSTRUCTIONS:
– Use only a soft cloth to clean the product.
MORE INFORMATION:
To access further information such as product overview and material descriptions, please visit our
website at www.fermliving.com. If you have any questions or comments, please do not hesitate to
contact us at [email protected].
Technical Specifications
ANCORA FLOOR LAMP:
Voltage: 220-240V – 50Hz
Dimmable: No
Certification: CE, IP20 Class II
Socket: E27 socket base
Recommended light souce: 2 pcs light bulb max 8W LED (light bulb not included)
2

Box Content
1 x
Lamp base
1 x
Lamp shade
1 x
Bottom screw
1 x
Allenkey
1 x
Z screw for top
3

1
Assembly Process
Insert light bulbs. (E27 bulbs not included)
4

2
Assembly Process
Mount the lampshade.
5

fermliving.com