FERRANTI COLLIE User manual

Ferranti s.r.l. Unipersonale
Via Vicinato n. 43 - Frazione Fratta - 06036 Montefalco (PG) - Italy
Tel. [phone]
[email protected] - www.ferrantinet.com
ASSEMBLY MANUAL
DOG HOUSE - COLLIE Model
Rel. 08-2022 - Rev. 0
EN - Translation from the original language (Italian)
ASSEMBLY MANUAL
DOG HOUSE
COLLIE Model
ATTENTION
The manufacturer is not liable for damage to
property, persons and animals caused by ac-
cidents due to failure to comply with the in-
structions in this assembly manual.
The images are purely indicative and do not constitute a
commitment for the manufacturer and/or the Distributor.
Any proposal by the Customer regarding improvements to be
made to the product will be welcomed by FERRANTI S.R.L.,
which will evaluate their implementation.
INTENDED USE (PERMITTED USE).
The product in question has been designed for the housing and
keeping of animals.
IMPROPER USE (NOT PERMITTED).
Any use other than the permitted one is to be considered “im-
proper use”; the Manufacturer therefore declines all responsibil-
ity for any damage caused to property, animals and/or persons.
GENERAL DESCRIPTION
Suitable for:
• medium sized dogs (18-40 kg, 50-63 cm): Golden retriever,
Boxer, Collie, Labrador, Border collie.
• large size dogs (20-45 kg, 50-70 cm): German Shepherd,
Dalmatian, Female Dobermann, English Setter, Akita Inu,
Argentine Dogo, Czechoslovak Wolf.
Made of marine plywood treated with impregnating agent, 1.5 cm
thick, easily disinfectable and washable; complete with insulated
opening roof and wooden platform raised above the ground by 7
cm, removable and washable.
OVERALL DIMENSIONS
COLLIE model
External (WxDxH) cm 119 x 86 x 97
Interior (WxDxH) cm 111 x 59 x 84/70
W = Width / D = Depth / H = Height
UNPACKING
► Place the structure near the nal installation site and on a
stable and horizontal area of the ground.
►Remove the packaging materials taking care not to damage
the components.
Dear Customer,
Thank you for purchasing a FERRANTI product.
OBLIGATION
Please consult this assembly manual carefully
before proceeding with any operation on the
product.
INTRODUCTION
This assembly manual reects the technique at the time of pur-
chase and the specications in force at the current date of edi-
tion; it contains the information necessary for correct installation,
cleaning and disposal of the product at the end of its life.
FERRANTI S.R.L. reserves the right to make modications,
changes or improvements to the manual or to the product at any
time and without notice.
Use only the original mounting components provided.

Ferranti s.r.l. Unipersonale
Via Vicinato n. 43 - Frazione Fratta - 06036 Montefalco (PG) - Italy
Tel. [phone]
[email protected] - www.ferrantinet.com
ASSEMBLY MANUAL
DOG HOUSE - COLLIE Model
Rel. 08-2022 - Rev. 0
EN - Translation from the original language (Italian)
ATTENTION
DANGER! Keep out of the reach of chil-
dren and animals.
Packaging materials (plastic bags, straps, etc.)
can be a source of danger to health (e.g. su󰀨o-
cation).
►Divide the packaging materials according to their type and
dispose of them in accordance with the provisions in force
regarding the disposal of waste.
RECYCLING
All the packaging materials are recyclable and
must be disposed of in accordance with the lo-
cal legislation.
STANDARD EQUIPMENT
123
1
Screws
M8x30 No. 8
2
Screws
4,8x16 No. 8
3
Nuts M8 No. 18
approx.
INSTALLATION
2x The assembly operations must be performed
by at least two persons.
For the assembly of the products, the use of
Personal Protective Equipment is always re-
commended: work gloves to protect the hands
from the danger of being cut.
RECOMMENDED TOOLS
Slotted Screwdriver - Cross Head Screwdriver - Wrench - Cutter.
Note: Tighten the screws completely only at the end and after
checking the square of the structure.
A Rear wall
B Side wall
C Front wall
D Roof
E Bracket
F Holes prepared for roof assembly
G Platform
1A Assembly of the rear wall to the side panels
►Take 8 screws (1) and 8 nuts (3) from the kit supplied.
►Secure the rear wall (A) to the side walls (B) using the
screws (3) and nuts (3) as shown in the diagram.
►Attach the front wall (C) to the side walls (B) in the same way.
1B Assembly of the Roof to the doghouse
►Take the screws (2) from the kit supplied.
►Place the roof (D) over the doghouse and line up the holes
in the bracket (E) with the holes (F) on the front wall (C).
►Secure with the screws (2).
1C Assembly of the platform to the doghouse
► Lift the dog house o󰀨 from the roof and insert the platform
(G).
1ASSEMBLY DIAGRAM
CLEANING
CLEANING
Clean the structure periodically (or in the presen-
ce of obvious dirt). Sanitise, disinfect and clean the
inside of the kennel with suitable products that are not
harmful to the health of the person and the animal.
SCRAPPING AND DISPOSAL
RECYCLING
The materials that compose the structure must be
disposed of according to the type and procedures
provided for by the legislation in force in the country
of installation.
For further detailed information on the disposal of this product,
contact the municipal o󰀩ce, the local waste disposal service or
the store where it was purchased.
8 6
A
D
C
B
B
F
D
E
7
2x
G