FHC ZEPHYR ZEP03 User manual

FRAMELESS HARDWARE COMPANY P.O. Box 1906, South Gate, CA 90280 Toll Free: [phone] |Fax: [phone] |Web: fhc-usa.com
SHOWER HINGE TEMPLATE PROFESSIONAL GRADE
EXPERIENCE AND INNOVATION
SPECIFICATIONS
36"
MAX
WIDTH
36"
MAX
WIDTH
2-HINGES 3-HINGES
SEE TEMPLATE ON BACK
Refer to Dimensions Shown
to Ensure Accuracy
MAX
100
LBS
CARE & CLEANING GUIDELINES:
For best results, keep the following recommendations in mind when caring for your FHC shower door hardware.
Your shower door should be dried daily with a soft towel or cloth to ensure its original nish. Do not use harsh
cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will
become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning
the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely
with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle,
cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware.
MAINTENANCE:
FHC’s hinges come factory greased for a silent, hassle-free experience.
If there is any noticeable squeaking that occurs after installation, it is recommended
to apply a few drops of (3 in 1) multi-purpose oil to the hinge, at the nylon washer/pivot
location. The lubricant will penetrate the hinge crevices, reducing friction, cleaning
grime, and/or buildup. Spray lubricants are prohibited. If, for some reason, the hinge
is disassembled during maintenance, use a small amount of white lithium grease
to lubricate the interior hinge components.
MAX
150
LBS
SPECIFICATIONS
Glass Sizes: 3/8” (10 mm) Tempered Glass Only
Construction: Stainless Steel or Solid Brass
Closing Type: Free Swinging - must be used with a Door Stop.
Cutout Required: See Page 6
Includes: Hinge body, glazing gaskets, wall mounting screws, allen
head/phillips head cover plate screws, and fabrication template.
Use: Residential Bath and Commercial Hotel Applications
GASKET SPECIFICATIONS:
For 3/8" (10 mm) Glass: Use One Thick Gasket On Each Side
GLASS INSTRUCTIONS:
Only use tempered safety glass. To prevent damage to the hinge nish
during installation, do not use power tools when installing these hinges.
IMPORTANT INFORMATION:
The Zephyr Series Hinge is a Free-Swinging Hinge. Zephyr Series Hinges have
no self-centering mechanism and must be used with a Door Stop. Hinges swing
in one direction only.
ZEPHYR
Wall Mounted Inswing Hinge
ITEM NO. ZEP03 36"
MAX
WIDTH
40"
MAX
WIDTH
2-HINGES 3-HINGES
SEE TEMPLATE ON BACK
Refer to Dimensions Shown
to Ensure Accuracy
1-3/16"
(30 mm)
3-1/8"
(79 mm)
MAXIMUM DOOR
CAPACITY
3/8" (10 mm) GLASS
Approx. 5 lb/ft2
DOOR WEIGHT DOOR WIDTH
USING 2 HINGES 100 LBS. (45 kg) 36" (813 mm)
USING 3 HINGES 150 LBS. (68 kg) 40" (1066 mm)
NOTE: Do not exceed either maximum weight or width when choosing proper quantity of hinges.
1-7/8"
(47 mm)
LIT0229CREV. 11.30.22 PG 1 OF 2

FRAMELESS HARDWARE COMPANY P.O. Box 1906, South Gate, CA 90280 Toll Free: [phone] |Fax: [phone] |Web: fhc-usa.com
SHOWER HINGE TEMPLATE PROFESSIONAL GRADE
DO NOT MEASURE / SCALE DRAWING
USE DIMENSIONS SHOWN
For Technical Support
Call Toll Free in the U.S.
[phone]
USE ONLY
MONOLITHIC
TEMPERED GLASS
EXPERIENCE AND INNOVATION
ZEPHYR
Wall Mounted Inswing Hinge
ITEM NO. ZEP03
5/8" (16 mm)
Diameter Holes
7/8"
(22 mm)
1-1/8"
(28.5 mm)
7/8"
(22 mm)
1-3/4"
(44 mm)
C
L
C
L
C
L
C
L
C
L
C
L
1-3/4"
(44 mm)
C
L
DOOR PANEL
C
L
TOP OF GLASS
1-1/8"
(28.5 mm)
C
L
C
L
EDGE OF GLASS
TOP VIEW-INSTALLATION DETAIL
1/4"
(6 mm)
LIT0229CREV. 11.30.22 PG 2 OF 2
5/8" (16 mm)
Diameter Holes