Filmcity A7R II User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
A7R II Camera Cage (FC-A7RS-C)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assembly Manua l
2x 150mm
Male Rods
Camera cage
Sliding Base Plate
Cable Clamp Rod Adapter
Top Handle
2x 150mm
Female Rods

2
 Slide the rod adapter into the sliding plate
and lock it.
 Insert the camera into the cage and ghten
using a screwdriver .
A7R II Camera Cage Setup
Cage Assembly
 Insert 150mm female threaded rods into
the rod adapter.
NOTE: You can aach the 150mm male rods
to the front and extend the rods for mounng
your mae box, follow focus and handles etc.
 Aach the quick release plate of the rod
adapter to the cage and ghten it.
 Slide the handle into the top of cage &
ghten the knob.
 Aach the sliding base plate to the quick
release plate of your tripod head (Not-
Included)

3
NOTE: Loosen the screw using a screwdriver
to adjust the handle's direcon or mount it
sideways.
Cable Clamp
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.
YOUR FILMCITY A7R II CAMERA CAGE
ALL DRESSED UP AND READY TO GO
(SHOWN WITH OPTIONAL ACCESSORIES)
NOTE: Cable Clamp has a 1/4” screw and can
be aached to any 1/4” thread.