Filmcity FC-BC-DSR-P User manual

FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 1
Belly Cruzer DSLR Steady Camera Rig
FC-BC-DSR-P
I N S T R U C T I O N M A N U A L
All rights reserved
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permied by
the applicable copyright statutes or in wring by the publisher.

FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 2
I N T R O D U C T I O N
Our FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR) meets and exceeds
the requirement of DSLR users by providing professional look production value at
an affordable price.
I N T H E B O X
Please inspect the contents of your shipped package to ensure you have received all
that is pictured and listed below.
Matte Box MB-600 French and
Side Flags Battery Mounting
Plate
Shoulder Pad
Handle bracket
Front handle
bracket
Accessory mounting
Adapter
Cage Base with
Quick Release Accessories
Cage top plate
Front handle rod
2 x 300mm Male
threaded Rods
Top Handle
1 x Handle Set
SR-33A Adapter
Front handle
bracket clamps Clamps For
Handle Set
4 x 300mm Female
threaded Rods
4x 150mm Female
threaded Rods
4x 100mm Male
threaded Rods Belly
Hot Shoe
Straight &
Z-bracket

FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 3
A S S E M B LING YO U R B E L LY C R U Z E R -D S L R C A M E R A R I G
 Insert the french flag in to the matte box and tighten the screws. Using the
same approach, insert the side flags into the (big) slots provided in the hinges
and secure with the screws.
 Insert the filter holders to your matte box as shown below.
Note: For better gripping of filter in filter holder, retighten the filter tray knob to
secure the filter properly.
Note: If the french flag( top)
remains loose even after tightening
the knob you have to slightly
tighten the allen bolt as shown in
the image.
 Attach knicker on conversion ring, then screw in the conversion ring on ring
holder and tighten the screw to secure as shown.

FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 4
A S S E M B LING YO U R F C -BC-D S R R I G
 Insert the 300mm female threaded rod into the camera base and tighten with
allen key.
 Attach the quick release adapter base with the quick release plate of your
tripod and tighten the bolt to secure properly.
 Attach the camera with quick release plate and tighten the bolt to secure
properly.

FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 5
 Now loosen the knob and press the pin to release the quick release plate .
 Attach the camera with quick release plate and tighten the bolt to secure
properly.
 Now mount the camera onto the
base plate and tighten the knob
to secure it.
 Attach the rods on the cage base plate and tighten the knob to secure
properly.

FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 6
 Screw-in the 100mm male
rods to extend the height of
cage.
 Now attach the matte box to the front of rods, align the knicker with the lense
barrel .
 Attach the cage top plate and
tighten with the knob.
 Attach the accessory mounting bracket and tighten with the allen key.

FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 7
 Now Loosen the top plate with the help of allen key and insert the 300mm female
rods.
 Attach the belly to the rods and tighten with the knob to secure it.
 Attach the front handle bracket clamps with the bracket, attach it with the rods
and secure it properly with the help of allen key.
Note: The front handle bracket
clamps are the ones with allen
bolts.

FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 8
 Now insert front handle rod into
the front bracket and secure it
properly with the help of allen
key.
 Screw the handle into the handle clamp and insert the handle into the rod.
Note: The front handle bracket
clamps are the ones without allen
bolts
 Now insert 300mm male
threaded rods into 300mm
female threaded rods.

FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 9
 Attach the shoulder pad into the rod and Insert battery plate and tighten with
the knob to secure it.
 Attach SR-33A adapter into the rods and tighten with knobs to secure it.
 Now attach the top handle and tighten the knob to secure it properly.
Yo u r F I L M C I T Y DSLR CAMERA SHOULDER MOUNT KIT
A L L D R E S S E D U P A N D G O O D T O G O

FILMCITY Belly Cruzer-DSLR Steady Camera Rig (FC-BC-DSR-P) 10
WARRANTY
We oer a limited me warranty for our products. For Mechanical products we provide a 6
month warranty & for electronic products we provide a 3 month warranty from the date of
purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note
that we will not cover any shipping costs for returning the product to us. If any VAT or import
dues are applied to the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we
do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the
product , or service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of
the replacement parts only) to the customers aer the Warranty
Period has expired. We will cover the complete cost of sending replacement parts within the
warranty period. Aer that, Nominal cost of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back
the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
best to help you out.
For any other assistance you can reach us via email.