Filmcity FC-A6360-CHRS User manual

FILMCITY DSLM Camera Cage with top handle & Rod Support 1
DSLM Camera Cage with Top Handle
& Rod Support
(FC-A6360-CHRS )
I N S T R U C T I O N M A N U A L
All rights reserved
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by
the applicable copyright statutes or in writing by the Publisher.

FILMCITY DSLM Camera Cage with top handle & Rod Support 2
INTRODUCTION
Sony alpha A6000 A6300 ILCE-6000 6300 NEX-7 perfectly ts into cage with 1/4" screw. It allows
you easy access to all the vital control buons of the camera. There is exactly perfect spacing for
the lens and prevent a6300 from overheang. Threads of 1/4" for various mounng accessories
such as handle, evf mount & tripod plate etc. Includes top handle for easy handheld shoong.
Top handle
Camera cage Sliding base plate
2 x 300mm female rods
15mm Rod adapter
 Aach the quick release plate of your tripod head with sliding base plate and ghten it with
the help of screw driver. Now mount the sliding base plate on uid head and secure it
properly with the help of knob.
ASSEMBLING YOUR DSLM CAMERA CAGE WITH TOP HANDLE & ROD SUPPORT
IN THE BOX
Please inspect the contents of your shipped package to ensure you have received all that is
pictured and listed below.

FILMCITY DSLM Camera Cage with top handle & Rod Support 3
 Slide-in the rod adapter into the sliding
plate and lock it with the help of knob
as shown.
 Insert 300mm female threaded rods into the rod adapter and ghten the knob.
 Aach the camera with cage and
ghten it with the help of screw driver.

FILMCITY DSLM Camera Cage with top handle & Rod Support 4
 Aach quick release plate of rod adapter with the cage and ghten it with the help of
screw-driver. Then slide it into the rod adapter and ghten with knob to secure.
 Now aach the sliding handle base onto
the cage and ghten the screw with the
help of allen key.
 Now slide the handle into the sliding handle base & ghten the knob.

FILMCITY DSLM Camera Cage with top handle & Rod Support 5
Note: The direcon of the handle can be adjusted. Loosen the screw with the help of screw
driver to adjust the direcon of handle or to mount it sideways.
YOUR FILMCITY DSLM CAMERA CAGE WITH TOP HANDLE & ROD
SUPPORT ALL DRESSED UP AND GOOD TO GO
S h o w n w i t h o p t i o n a l a c c e s s o r i e s
WARRANTY
We oer a one year warranty for our products from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note
that we will not cover any shipping costs for returning the product to us. If any VAT or import du-
es are applied to the return, we will also charge these costs to the customer.

FILMCITY DSLM Camera Cage with top handle & Rod Support 6
The warranty does not include, by the way of example, damage caused by products that we do
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,
or service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the
replacement parts only) to the customers aer the Warranty Period has expired. We will cover
the complete cost of sending replacement parts within the warranty period. Aer that, Nominal
cost of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back
the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
best to help you out.
For any other assistance you can reach us via email.