Filmcity FC-S2-4010 User manual

What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that
is listed below.
2 Power Video Camera Slider (FC-S2-4010)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Assem b l y M a n u a l
Filmcity 2 Power Video Camera Slider

2
Filmcity 2ft Camera Slider Setup
YOUR FILMCITY POWER VIDEO CAMERA SLIDER 2FT SLIDER
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Tighten the knob of camera plate to secure.
Screw-in the fluid head (Not Included)
onto the camera mounting plate of the
slider
Now loosen the side knob of Fluid Head and
remove the quick release plate and then secure
your camera on quick release plate with the
help of screw driver.
Attach the Camera with fluid head and
tighten the knob of fluid head.




3
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our
utmost support and care unl you use our product.