Filmcity FC-97 User manual

FILMCITY DSLR Shoulder Rig with counter weight 1
DSLR Shoulder Rig with Counter
Weight
(FC-97)
I N S T R U C T I O N M A N U A L
All rights reserved
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any
means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted by
the applicable copyright statutes or in writing by the Publisher.
F o r d e m o n s t r a t i o n o n l y

FILMCITY DSLR Shoulder Rig with counter weight 2
INTRODUCTION
Filmcity presents DSLR Shoulder Rig with Counter Weight - just a perfect companion to sasfy
the basic needs of camera operators and video-makers. This versale rig is light-weight and gives
you freedom to shoot whole day without any stress, both outdoors and indoors. It is a
very portable and handy kit. Easy to set up and take with you, this exible DSLR rig gives you a
beer lming experience! This Shoulder Mount Rig comes with a Quick Release Plate for quick
mounng & dismounng, adjustable handles for easy holding and an ergonomic shoulder pad
with counter weight which allows fague free long-hours shoong.
 Aach Quick Release plate with your tripod plate, ghten it with the help of screw driver &
mount the quick release plate on your uid head.
ASSEMBLING YOUR DSLR SHOULDER RIG
2 x 300mm female rods
Quick Release plate 1 x Counter weight
2 x Front Handle
Shoulder Pad
1 x 300mm knurling rod
2 x 150mm male rods
2 x JR-15-P adapter
Handle Bracket

FILMCITY DSLR Shoulder Rig with counter weight 3
 Insert 300 mm female rods into the quick release plate and ghten knob properly.
 Insert juncon rod adapter into the front of the rods and ghten the knob to secure it.
 Screw-in the male threaded 150mm rods
into 300mm female threaded rods.

FILMCITY DSLR Shoulder Rig with counter weight 4
 Aach the handles at both sides and
ghten it to secure it.
 Insert 300mm knurling rod into the
juncon rod adapter and ghten the
knobs.
 Aach the shoulder pad and counterweight with the rods and secure it properly with the
help of provided knob.

FILMCITY DSLR Shoulder Rig with counter weight 5
 Aach the camera with quick release plate and ghten it with the help of screw driver.
Then slide-in the camera onto the adapter and ghten the knob to secure properly.
YOUR FILMCITY DSLR SHOULDER RIG WITH COUNTER WEIGHT
ALL DRESSED UP AND GOOD TO GO
SHOWN WITH OPTIONAL ACCESSORIES
 Remove the quick release plate by
pressing the quick release pin.

FILMCITY DSLR Shoulder Rig with counter weight 6
WARRANTY
We oer a one year warranty for our products from the date of purchase.
We will repair or replace your product, free of charge, in the event of a defect in materials or
crasmanship obtained during normal use or handling based on the user manual. Please note
that we will not cover any shipping costs for returning the product to us. If any VAT or import
dues are applied to the return, we will also charge these costs to the customer.
The warranty does not include, by the way of example, damage caused by products that we do
not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product ,
or service by anyone other than our company.
We are not liable for incidental or consequenal damages resulng from the use of the unit or
occurring due to any breach of this warranty.
Replacement parts of the product will be provided at nominal cost (covering the cost price of the
replacement parts only) to the customers aer the Warranty Period has expired. We will cover
the complete cost of sending replacement parts within the warranty period. Aer that, Nominal
cost of the product & Actual shipping cost will be charged.
Do not send the unit to us without rst geng a response and geng the approval to send back
the item.
In case of any kind of dissasfacon, we urge you to Contact us immediately and we shall do our
best to help you out.
For any other assistance you can reach us via email.