Finally White FWDS799 User manual

Teeth Whitening Accelerator
Designed for teeth whitening, affixing tooth gems, LED light therapy
and more.
Please review this booklet prior to use
Model: FWDS799
User Guide

TABLE OF CONTENTS:
1.Safety.........................................................................
2.Description..................................................................
3.Features.......................................................................
4.Packing........................................................................
5.Installation/Set Up.....................................................
6. Product Display.........................................................
7.Operation....................................................................
8.Technical, Sound, Cooling and Storage.......................

1. Safety
Prior to assembly and starting the unit, please read this manual
carefully.
Please note the following safety guidelines recommended below:
It is important to observe the following precautions and
procedures.
Please do not use this device on individuals who have history of
photo-sensitivity or medications increasing photo-sensitivity.
Do not use around flammable products, anesthetic mixtures or
nitrous oxide.
Do not look directly at the light when in use, always wear
industrial LED goggles as it could cause discomfort, pain or
damage.
Please do not move the light around when you have locked the
position. This will damage the machine. Always loosen any
necessary joints/bolts before adjusting then re tighten. Doing so
will avoid damage and extend the life of the machine.

2. Description
◦ The FWDS799 teeth whitening accelerator is a new type of
whitening technology utilizing both RED and BLUE LED Light
Therapy. The strength of the machine and its purpose is
determined by its corresponding nanometer and light
decomposition, allowing the best results in the shortest time.
3. Features
• Metal casting standing system
• Relaxing whitening experience with gentle and strong led light
therapy.
• Equipped with both RED and BLUE LED lighting.
• Red light used to help with pre-existing inflammation and healing.
• Adjustable power mode, time settings and goose neck
• Up to 30-minute timer
4. Packing
• Whitening Light
• Base, wheels, wrench, bolt, screw
• Mouth Guard
• Power Cord
• User Manual
5. Installation/Set Up
• The FWDS799 is easy to set up and requires only a Philips
screwdriver.
1: Attach your wheels to the base by inserting into the bottom of the
stand.
• 2: Insert long straight pole into the base.

• Apply the square metal plate with bolt (included) to the bottom of
the wheels/base of pole to secure together.
• Insert the top of the head into the pole, align the holes in the pole
attached to the base to the hole at the base of the top pole. Use
included screw to secure together.

6. Power
Press the high/low button to choose the output
• High Power – 100% of output strength (ideal for whitening)
• Low Power – 50% of output strength (ideal for beginning LED
light therapy treatments)
• Time Display
•
• To set the time, press the ▲ to increase or
▼ to decrease. The timer will begin automatically and
turn off when the timer is complete.
•
Note: Only when the light is in standby (not emitting) can settings be
set. Please stop the machine if you wish to make any adjustments once it has
started.

7. Operation
A: Connect the power cord to the machine in all places than place
into a power socket.
Please make sure your connection is secure or you may experience
unstable power.
B: Press the ON/OFF button to turn on.
C: Set the time accordingly
To set the time, press the ▲ to increase or ▼ to decrease. The timer will
begin automatically and turn off when the timer is complete.
Power
• Press the high/low button to choose the output

• High Power – 100% of output strength (ideal for whitening)
• Low Power – 50% of output strength (ideal for beginning LED light
therapy treatments)
Note: Only when the light is in standby (not emitting) can settings be
set. Please stop the machine if you wish to make any adjustments once it has
started.
D. Press desired button for desired color/treatment.
To operate: Make sure the connection from outlet to
power source to machine is secure. Turn Power On (using on/off
button). Adjust timer with up and down arrows accordingly.
Select the desired output B(lue), R(ed) or BR (blue and red) ←
this is what you use for teeth whitening. After selecting BR the
machine will automatically start – place within 2” of client and
ensure they are wearing LED safety goggles.
E. To pause the light, press the pause button, to resume hit the
corresponding color button.

8. Technical
9. Sound Warning (if applicable)
• After starting, the machine will continue until the time ends.
10. Cooling Setting
• To ensure all LEDs work at normal temperature when in use, a
high efficiency industrial fan operating with minimal noise has
been used to expel heat.
• Built-in smart temperature protection: if the machine reaches
high temperatures it will automatically shut down. After it has
cooled it will return to normal. This could be 30minutes to
24hours depending on the amount of use.
11. Transportation and Storage
• Lay light during transportation, avoid any shaking
• Low humidity( <95%). Room Temperature
Your serial number: ____________
This light has been checked on ____________ and found to be in excellent working condition
(brand new).