Firefly Splashy User manual

User Manual
Family Freedom
English
SSpplaslashhyy

p2 Splashy User Manual
Please read all user instructions
carefully before using Splashy.
These instructions can also be
downloaded from our website
www.reyfriends.com along
with videos, diagrams and
other useful downloads.
Contents
01 Intended Use p.03
02 Certication p.04
03 Warnings and Cautions p.04
04 Terms of Warranty p.06
05 Safety Information p.07
06 Precautions and Contraindications p.08
07 Cleaning and Care Information p.09
08 Product Inspection and Servicing p.11
09 Important Guidelines p.12
10 Re-issuing Firey Products p.12
11 Instructions for Use p.13
12 Sizing Information p.33
13 Table of Symbols p.34

Splashy User Manual p3
SECTION 01: Intended Use
Intended Use
Bathing Supports are intended to
support children and young adults
who have mild to complex postural
needs that disrupt the ability to sit
without external support. All devices
are intended to be used within a bath
or shower to facilitate personal care.
Splashy can additionally be used
outdoors for recreational purposes
such as use at a beach or water park.
Indications for Use
Splashy is intended to provide support
for children with disabilities who
require head and trunk support whilst
using the bath. For structure, safety
and support, it is essential that Splashy
is attached to the oorsitter base unit
at all times. Splashy is designed for
children aged between approximately
1–8 years old and with a maximum
user weight of 30kg (66lbs).
Children should not be left
unattended/unsupervised
in their Splashy at any
time, as they could be
at risk of drowning or
injuring themselves.
We recommend that an adult
completes product inspections in
accordance with Section 08 of this
user manual to ensure the product is
safe to use. Firey Friends Ltd.
and James Leckey Design Ltd.
cannot accept any responsibility if the
product is used outside of its intended
use. If in doubt please contact Firey
customer services on UK 0800 318265
or ROI 1800 626020.
Daily activities tested and
approved by Firey Friends Ltd
and James Leckey Design Ltd are:
1. In the bath or shower
2. For water play activities
Use of Splashy outside the
bathroom, (such as the garden
or beach) should be assessed in
advance. Be mindful that Splashy
contains working oorsitter-to-
seat connections which could be
affected by small particles and/
or obstructions (such as soil, grass
or sand). If Splashy does come
into contact with any substances
that could affect the oorsitter-to-
seat connections, ensure they are
thoroughly rinsed after use.
Please refer to Section 05 for
Safety Information and Section 07
for further guidance on cleaning
and care.

p4 Splashy User Manual
SECTION 02: Certication
Splashy is classied as a Class I Medical Device under EU and UK regulations.
As the manufacturer, James Leckey Design Limited, declares that this product
conforms to the Medical Device Regulation (2017/745), UK Medical Device
Regulations 2002, Medial Device Directive (93/42 EEC) and EN 12182:2012
Assistive products for persons with disability, general requirements and test
methods.
Notice to the user and/or patient: Any serious incident that has occurred
in relation to the device should be reported to the manufacturer and the
competent authority of the Member State in which the user and/or patient is
established.
NOTE:
General user advice.
Not following these instructions may result in physical injury, damage to the
product or damage to the environment!
SECTION 03: Warnings
and Cautions
Warning and Toppling Hazard:
• Never use Splashy on uneven
ground.
• Always check that the seat
back is secure before the user is
transferred into Splashy and the
user’s foot safety straps are being
used as soon as the user is seated.
• Never leave the child unattended
whilst seated in Splashy.
Caution Daily Checks:
• Splashy is to be checked daily
before use to ensure that all
harnesses and seating elements
are securely attached.
• Always visually inspect the
product before use. If in doubt,
STOP. If you suspect or know the
product or a part is faulty, STOP.
Contact our customer services
department or your local dealer as
soon as possible.

Splashy User Manual p5
Caution Finger Pinch Hazard:
• Take care when assembling or
adjusting the position of the seat
components that your ngers do
not get pinched when positioning
seat components and tightening
mountings.
• The carer should not touch any
moving joint or pivot that is not
locked.
Warning Finger Trap Hazard:
• Take care that the ngers of
the operator or child do not get
trapped in the spaces between the
seat and the frame.
Warning Occupant Security:
• Before placing the user in the
product, adjust the product into its
therapy orientation and check its
stability.
• User transfers in and out of
the product must be done with
appropriate equipment and
personnel.
• Ensure that the occupant is
secured with the device harnesses
as soon as they are transferred.
Care should be taken with
any recline adjustments for
involuntary movements which
might cause entrapment between
the seat and frame/bath. Never
leave the child unattended whilst
in Splashy.
• User toppling risk - if the belts
need loosened during hygiene
activities the child could slip down
or, due to lack of trunk control,
they could topple face forward.
• Drowning risk for reclining product
in a very deep bath.
• If the user exhibits any form of
distress, remove from the product
as quickly as is safely possible.
Caution Cleaning:
• Clean the product regularly to
prevent the build-up of dirt.
Accumulated dirt can prematurely
wear the seat mouldings and
encourage corrosion in the frame.
Only use non-abrasive household
cleaners and moist cloths.
Caution Cleaning Power Washer/
Hoses:
• Do not use hoses or power
washers on the frame
components, the frame is not
sealed against running water
and may be damaged by water
ingress.

p6 Splashy User Manual
SECTION 04: Terms of Warranty
The warranty for Splashy applies only
when the product is used according
to its intended use, following all
manufacturer’s specications.
A one year warranty is provided
with this James Leckey Design Ltd.
manufactured product.
Goods can be returned to us for
warranty, repair or replacement up
to 12 months from receipt. Once you
contact us, we will arrange collection
of the goods at our expense and, once
returned to us we will repair or replace
goods and return them to you within
14 days. In all cases, it is the customers’
responsibility to ensure the goods
being returned are suitably packaged,
preferably in the original packaging.
Caution Storage:
• The product should be kept away
from all direct sources of heat,
including naked ames, cigarettes,
electric and gas heaters.
Caution Bringing into Use:
• When bringing Splashy into
use from storage, allow it
to acclimatise to ambient
temperature rst.
Caution Disposal:
• Only dispose of Splashy in a
community waste disposal site
under the correct recycling
category.

Splashy User Manual p7
SECTION 05: Safety Information
1. Always read user instructions
fully before use.
2. Children should not be left
unattended/unsupervised
at any time in this product.
3. If using Splashy at the beach,
never leave your child
unattended near the sea.
4. Check that all of the Splashy
components are securely assembled
according to user instructions before
use. Splashy must be attached to
the oorsitter base unit at all times
and placed on a rm, solid, static
surface. Never use Splashy on a
sloping surface.
5. The maximum user weight
for Splashy is 30kg (66lbs).
This should never be exceeded.
6. Splashy contains parts which could
present a choking hazard to small
children. Check all components are
tight and securely fastened before
use – including toggles and straps.
7. Do not modify Splashy or use
components other than Firey
approved components with
Splashy at any time. This may
put your child at risk and may
also invalidate your warranty.
8. When using Splashy in environments
which may have soil/sand/grass or
small components, always ensure
that you clean out the oorsitter-to-
seat connections after every use to
prevent any obstructions.
For reconnecting oorsitter to seat
please refer to Section 11.2.6
9. After use, allow Splashy to dry
thoroughly before storing it away
carefully. Splashy should be kept
away from all direct sources of heat
including naked ames, cigarettes,
electric and gas heaters.
10. Clean the product regularly in
accordance with Section 07 of
this user manual.
11. Complete maintenance checks
on a regular basis to ensure
your product is in good working
condition. Splashy should not be
used if any of the parts are faulty.
12. If you are in any doubt about the
safe use of Splashy or the oorsitter
base unit, or if any parts should
fail, please cease using the product
immediately and contact Firey
customer services on UK 0800
318265 or ROI 1800 626020.
13. Any promotional items supplied
with Splashy should not be used
unsupervised.
Failure to follow these instructions
may put you or the child at risk.

p8 Splashy User Manual
SECTION 06: Precautions and Contraindications
Precautions
• Fixed spinal deformities such as
scoliosis or kyphosis.
• Severe muscle contractures.
• Severe muscular or skeletal
asymmetry including hip
dislocation.
• Progressive and muscle wasting
conditions.
• High risk or recent history of bone
fractures.
• High risk of pressure related injury
or open sores.
• Strong, uncontrolled movement
patterns.
• Poorly controlled seizure activity.
• Children dependent on the use
of percutaneous endoscopic
gastrostomy.
• Medical instability including
compromised respiratory or
cardiovascular function.
• Dependant on 3rd party life-
sustaining apparatus such as
oxygen tanks.
• Signicant learning disabilities and/
or behavioural issues.
Contraindications
There are no contraindications
associated with bathing devices. The
instructions for use indicate that for
all products, no child or young adult
should be left unintended in the device
when in use or contact with water.
All precautions and contraindications
are taken at the discretion of the
parent or prescribing clinician.

Splashy User Manual p9
SECTION 07: Cleaning and Care Information
How to Maintain
• When cleaning Splashy we
recommend that you use only warm
water and a non-abrasive detergent.
Never use organic solvents or dry
cleaning uids.
• Do not machine wash or steam
clean Splashy’s foam components
as it may cause the foam to lose
shape and warp.
• We recommend that you do not use
any type of prescribed medicated
lotions in the bath water during
the bathing process as this may
contribute to the breakdown
of Splashy’s materials.
• Wipe the bath surface clean of any
residue or dirt before attaching the
oorsitter to it, ensuring the rubber
feet grip rmly to the bath.
• To remove sand/soil/grass or any
small particles that may be in the
oorsitter-to-seat connections, slight
tapping of the area will encourage the
particles to fall out. Rinse thoroughly to
ensure there is no build up of particles
inside the connections. For stubborn
blockages on the oorsitter, the latch
can be given a thumb push to remove
any particules and aid release.
• Should your bath seat come into
contact with salt water, rinse all
parts thoroughly with fresh,
clean water.
5-point Harness
The Splashy 5-point harness can
be removed and cleaned with
soapy water.
Floorsitter Base Unit
1. Ensure the bottom of the oorsitter
base unit is cleaned after every use
to ensure it grips onto the bottom
of the bath.
2. Soap and water can be
used for daily cleaning.
3. Do not use solvents to clean
the oorsitter base unit.
Splashy Foam Seat Base,
Backrest and Supports
1. Soap and water can be used
for daily cleaning.
2. The EVA foam covers can be
removed and washed periodically
to avoid a build-up of residue
and grime.

p10 Splashy User Manual
Splashy’s EVA foam covers can
be removed and washed every
few months.
1. The EVA covers are attached by
eight hooks. Two on the seat back
and six on the seat base.
2. Detach all hooks by hand
(do not use tools).
3. Wash using soapy water.
4. Ensure the covers are completely
dry before reattaching.
5. Ensure all hooks are engaged
when putting the covers back on.
If Splashy is being used
in environments outside
of the bathroom,
(such as the beach or
garden) it is important
to rinse it after every use
so that it is free from any
particles/obstructions
that could affect its
working mechanisms.
For reconnecting
oorsitter to seat please
refer to Section 11.2.6
Hook locations

Splashy User Manual p11
SECTION 08:
Product Inspection
and Servicing
We recommend that various checks
of Splashy are carried out before each
use to ensure the product is safe.
The recommended checks are
listed below:
1. Ensure that the Splashy back rest
and seat base have been tted
securely together as detailed in
Section 11 of this manual.
2. Check that Splashy is xed correctly
to the oorsitter base unit and
ensure it is stable and secure in
the bath before placing the child in.
3. Ensure the 5-point harness and
bumper supports are securely xed
to Splashy using the toggle xtures.
4. Check the 5-point harness and
bumper supports for any signs of
wear or tear.
5. Check the buckles and toggles
for cracks or damage.
6. Check Splashy and Floorsitter
latches and connections are clear
of dirt or debris with no signs of
wear and tear.
If you are in any doubt
about the safe use of your
Firey product or if any
parts should fail, please
cease using the product
and contact our customer
services department as
soon as possible.
For all service related issues
please refer to the Firey website
www.reyfriends.com or contact
Firey on customer.enquiries@
reyfriends.com

p12 Splashy User Manual
Note: Always clean the product rst
to remove accumulated soiling prior
to disinfecting/sanitising.
1. Where possible, we recommend
the use of an automated “fogger”
disinfection system that is used
to completely cover the product
surfaces with a disinfectant agent.
The manufacturer’s instructions
for the chosen system should
be referred to prior to use and
followed exactly.
2. Where an automated disinfection
system is not available, all product
surfaces should be wiped over
with disinfectant surface wipes or
liquid disinfectant on a soft cloth.
Suitable products are 70% IPA,
70% Alcohol or diluted bleach. The
manufacturer’s instructions for the
chosen product should be followed.
Product upholstery and fabrics
should be cleaned thoroughly
in accordance with section 07,
Cleaning and Care Information, of
this manual.
Ensure a copy of the user manual is
supplied with the product. If in any
doubt about the continued safe use
of your Firey product or if any parts
should fail, please cease using the
product and contact our customer
service department as soon as possible
on
UK 0800 318265 or ROI 1800 626020.
SECTION 09:
Important Guidelines
Ensure that Splashy is sitting securely
in the bath. Recline the back rest into
a mid-recline position for children who
can assist with transfers or are lifted
into the bath. Please refer to
section 11.6
Full recline should be used for children
who will be hoisted into the bath.
This should make transfers into
Splashy easier.
We would advise you t the 5-point
harness and bumper supports to
Splashy before you place the child
into the seat, however, they can be
adjusted if necessary once your child
is in the bath. Please exercise caution
and monitor your child closely whilst
alterations are being made to the
bath seat.
Lifting a child in and out of the bath
is an activity which could cause injury
to your back. We would recommend
you seek advice from you therapist
with regards to safe lifting (manual
handling techniques) of your child
in and out of the bath.
SECTION 10: Re-issuing
Firey Products
Before re-issuing a product, it is
recommended that it is disinfected
using one of the following procedures:

Splashy User Manual p13
SECTION 11:
Instructions for Use
11.1 Splashy Parts
Your Splashy will arrive
with the following parts:
1x Back rest
1x Seat base
1x Floorsitter base unit
4x Bumper supports
1x Groin strap & 4x Harness straps
The Splashy duck is
to be used under the
direct supervision
of an adult

p14 Splashy User Manual
11.2 Assembling Splashy
• We highly recommend that you
complete a ‘dry run’ with your
child in Splashy whilst wearing light
clothing to ensure correct placement
of harness and bumper supports.
• Make sure your bath is clean
and free from any residue before
placing the oorsitter into the bath.
• Your Splashy MUST be assembled
BEFORE lling the bath with water.
We recommend you ll the bath with
a mixture of hot and cold water to
prevent damage to Splashy.
• See section 11.6 for some guidance
on how to position the recline arm
on the Splashy.
Continued
11.2.1 Placement of
the oorsitter
The oorsitter should always be
placed on a rm, solid, static surface.
When placing the oorsitter on your
chosen surface, it’s vital that all
rubber feet are in contact with
the surface.
The rubber feet can be adjusted to
facilitate curved baths. You can do
this by rotating the feet clockwise
or anti-clockwise depending on
your required adjustment.
The rubber feet can be moved into the
narrower section of the oorsitter to
depending on the width of your bath.
You must ensure they mirror each
other. 4 or 6 feet would be stable.

Splashy User Manual p15
11.2.1 Placement of
the oorsitter
Once the oorsitter is in place,
ensure the recline arm is set to
its highest position.
11.2.2 Assembling the
Splashy seat
Before attaching Splashy to the
oorsitter, the back rest and seat
base must be assembled.
Hold the backrest of Splashy up
vertically with the grooves at the top.
Use your other hand to slot the seat
base into the grooves on the backrest.
Flip the seat base in the opposite
direction to lock the connection
together. Once connected insert
the hinge foam ap underneath
the foam backrest cover.

p16 Splashy User Manual
To connect the shoulder and
lateral straps, follow this diagram.
To ensure you are placing the straps in
the correct side of Splashy, the buckle
should appear as pictured.
11.2.3 Attaching &
conguring
the harness
& bumpers
To attach any of the support straps
and bumpers onto Splashy’s seat
base and back rest place the
relevant toggle through the hole.
Secure by turning the toggle
sideways underneath the seat.

Splashy User Manual p17
11.2.4 Conguring
5 point harness
Insert toggle of the groin strap
into Splashy seat base.
Insert the toggle of the
left shoulder strap through
the hole at the correct
height for your child.
Insert the toggle of
the left lateral strap
into a hole on the side
panels of the back rest.
Repeat the process
for the right shoulder
and lateral straps.
Once all the straps
are securely in place,
connect all the straps
together using the
buckle to create a
5 point harness.
The straps can be
fully adjusted by
releasing the clamp,
making the strap tighter
or looser depending on
requirements. Please ensure
the clamp is closed once
the strap has been adjusted.
Tip – When happy with
adjustment you can thread the
remaining section of the strap
through the foam section of
the harness to keep it tidy.

p18 Splashy User Manual
11.2.5 Conguring
3 point harness
Insert the toggle of
the left lateral strap
into a hole on the side
panels of the back rest.
Repeat the process
for the right lateral strap.
Once all the straps
are securely in place,
connect all the straps
together using the
buckle to create a
3 point harness.
Do not adjust conguration from a 5 point harness
to a 3 point harness while the child is in the bath seat.

Splashy User Manual p19
11.2.6 Fitting Splashy
seat to the
oorsitter
Lower Splashy with the seat base
at onto the oorsitter.
Making sure the seat base
is centrally aligned with the
oorsitter move the seat base
forward so the seat base slides
into the locking channel.
When the seat base locks into
the oorsitter you will hear a
click which will mean the lock
has been engaged.
Listen for audible click
when engaging both
seat base and seat back
to the oorsitter.

p20 Splashy User Manual
Before attaching the recline
arm to the backrest, ensure
that it is at the highest setting.
With one hand on Splashy,
use the other hand to push the
button highlighted and slot the
attachment into the backrest.
Once attached correctly,
you will hear a click.
This picture shows what the
bath seat should look like
when it is fully assembled.
It is now safe to put your
child into Splashy.