Firefly WeGo User manual

User Manual
fireflyfriends.com

MANUFACTURED BY
IBELIEVE SPORTS LTD FOR
JAMES LECKEY DESIGN LTD
TEL: [phone]
MODEL: WEGO PUSHCHAIR
MONTH AND YEAR
OF MANUFACTURE: 2018/11
IMPLEMENTATION
OF STANDARDS: ISO 7176
REGISTERED TRADE NAME
AND ADDRESS
JAMES LECKEY DESIGN LIMITED
19C BALLINDERRY ROAD, LISBURN
BT28 2SA, UNITED KINDGOM
TEL: [phone]
MODEL: WEGO PUSHCHAIR
MONTH AND YEAR
OF MANUFACTURE: 11/2018
IMPLEMENTATION
OF STANDARDS: ISO 7176
WARNING: To avoid
serious injury from
falling or sliding
out. Always use the seat
harness. Never leave child
unattended. IMPORTANT:
Keep these instructions for
future reference. A child’s
safety is your responsibility.
This push chair is suitable
for one child. WARNING:
This seat is not suitable for
children under 6 months.
MEETS THE BS 1021– PART1:
2014 SAFETY REGULATIONS
FOR CIGARETTE IGNITION
CAUTION CARELESSNESS
CAUSES FIRE

•IMPORTANT:
Keep these instructions
for future reference
• WARNING:
Never leave your child
unattended
• WARNING:
Ensure that all locking devices
are engaged before use
• WARNING:
To avoid injury ensure that your
child is kept away when unfolding
and folding this product
• WARNING:
Do not let your child play
with this product
• WARNING:
This seat unit is not suitable
for children under 6 months
• WARNING:
Always use restraint system
• WARNING:
Check that the pram body or
seat unit or car seat attachment
devices are correctly engaged
before use
• WARNING:
This product is not suitable
for running or skating
• WARNING:
Designed for children from
2 years old up to a maximum
weight of 30kg
• WARNING:
This pushchair has been designed
as a medical device and should
be not used in a vehicle
• WARNING:
Never use this pushchair
for more than one child
• WARNING:
Keep away from re
This product is suitable for a
child who cannot sit up unaided,
roll over and cannot push
themselves up on their hands
and knees. Maximum weight
of the child: 30kg

English
The Firefly WeGo is a lightweight
pushchair that is fully foldable
and allows for ease of travelling
and daily activities.
CONTENTS
01 Intended Use p.05
02 Declaration of Conformity p.05
03 Terms of Warranty p.06
04 Safety Information p.06
05 Cleaning & Care p.08
06 Product Servicing p.08
07 Important Guidelines p.09
08 Product Inspection p.10
09 Reissuing Firey Products p.10
10 Setting up your WeGo p.11
11 Adjusting WeGo p.17
12 Using the GoTo Seat with WeGo p.19
13 Adjusting WeGo Harness p.22
14 WeGo Dimensions p.23
p4 WeGo User Manual

English
Warning – Child should
be secured in the 5 point
harness at all times and
never left unattended
whilst in the pushchair.
Warning – When your
WeGo is stationary
we recommend the
brake be fully engaged
to prevent any
unintended movement.
SECTION 01: INTENDED USE
The WeGo Pushchair has been
designed to provide additional upper
body support. It is intended to be
used by children with a maximum
user weight of 30kgs.
The WeGo is for occasional use
not intended to replace primary
seating system or wheelchair.
The WeGo is compatible with
the Firey GoTo Seat’s size 1 & 2.
Both fabric and Vinyl are suitable.
For more info on GoTo sizing please
go to www.reyfriends.com/uk/
our–products/goto–seat
James Leckey Design Ltd., as
manufacturer with sole responsibility
for the Firey brand, declares that
WeGo conforms to the requirements of
the medical device directive 93/42/EEC.
WeGo has been CE marked as a Class 1
medical device.
SECTION 02:
DECLARATION
OF CONFORMITY
WeGo User Manual p5

English
The warranty for WeGo applies only
when the product is used according
to its intended use, following all
manufacturer’s specications.
A one year warranty is provided
with this James Leckey Design Ltd.
manufactured product.
Goods can be returned to us for
warranty, repair or replacement up
to 12 months from receipt. Once you
contact us, we will arrange collection
of the goods at our expense and,
once returned to us we will repair
or replace goods and return them
to you within 14 days. In all cases,
it is the customers’ responsibility to
ensure the goods being returned
are suitably packaged, preferably
in the original packaging.
1. Always read user instructions
fully before use.
2. Always ensure you assess the
WeGo for suitability before
placing the child into it.
3. Children should not be left
unattended /unsupervised at
any time in this product.
4. The maximum user weight for
WeGo is 30kgs (66lbs). This should
never be exceeded.
5. Do not modify WeGo or use
components other than Firey
approved components with WeGo
at any time. This may put your
child at risk and also invalidate
your warranty.
6. The WeGo has not been crash tested
so cannot be used for transportation
in motor vehicles.
7. This pushchair has been designed
to carry one child. Do not carry
additional items or children except
as advised in this manual. Failure to
comply may cause damage to the
pushchair and/or make it unstable.
8. Overloading or incorrect folding
may cause damage to the pushchair.
SECTION 03:
TERMS OF WARRANTY SECTION 04: SAFETY INFORMATION
p6 WeGo User Manual

English
9. If you are using the GoTo Seat
with WeGo, always ensure it is
rmly secured to the pushchair by
attaching the three black straps.
Please go to section 17 for
further guidance.
10. Use extra caution when using the
pushchair when your child is in full
recline as it may increase the risk
of tipping.
11. Always lift the front wheels over
curbs or steps by pushing down
on the handle.
12. The WeGo must be kept away
from all direct sources of heat
including naked ames, cigarettes,
electric and gas heaters.
13. This pushchair is not suitable
for running or skating.
14. Never allow children to fold,
assemble or disassemble the
pushchair.
15. Never allow the pushchair to be
used as a toy or allow children
to give rides to others.
16. If you are in any doubt about the
safe use of this pushchair or if any
parts should fail, please cease
using the product immediately
and contact Firey Customer
Services on customer.enquiries@
reyfriends.com
Warning: Failure to follow
these instructions may put
you or the child at risk.
Warning: Keep the plastic
cover away from children
to avoid suffocation
WeGo User Manual p7

English
For all service related issues please
refer to the rey website www.
reyfriends.com or contact the
Firey Customer Services team on
customer.enquiries@reyfriends.com
SECTION 06:
PRODUCT SERVICING
SECTION 05:
CLEANING & CARE
1. The pushchair can be cleaned with
cold water (300) with mild detergent.
2. The lining is removeable and
machine washable in cold water and
mild detergent. Do not tumble dry.
3. Always allow the product to dry
before folding and storing away.
4. Clean the frame with a damp cloth
and mild detergent.
5. Do not use abrasive cleaners
on the pushchair.
Tip:
One of the best water–based upholstery
cleaners is very easy to make at home.
Put one cup of warm (not hot) water
into a mixing bowl and then add 1/4 cup
of biodegradable dish washing soap.
Beat with an electric mixer at medium
speed until the liquid becomes a thick
foam. This foam will remove built up
dirt and most food or drink stains.
Not only is this cleaner, simple to
make and inexpensive, it is also
nontoxic and environmentally–friendly.
p8 WeGo User Manual

English
1. Take care to avoid injury to
ngers when unfolding and
folding the frame.
2. Before placing the child in
WeGo, ensure all locking devices
are engaged.
3. Secure the child in the harness
as soon as they are placed in
the pushchair.
Placing of child into GoTo Seat
1. The GoTo Seat must be securely
fastened in place for its intended use
before placing a child into the seat.
2. Ensure the harness straps do not
obstruct placement of child into
the GoTo Seat. Shoulder straps and
side lateral support straps should
be very slack.
3. Close centre buckle and adjust side
lateral support straps to ensure
child is secure in seat harness.
The shoulder strap length should be
adjusted to t your child securely.
4. The groin strap length can
be adjusted by accessing the
adjustment tting underneath the
padded cover. In the GoTo Size 2 the
location of the groin strap can be
moved outwards to provide more
room for your child as they grow.
SECTION 07:
IMPORTANT GUIDELINES
Removal of child from GoTo Seat
1. Slacken shoulder straps and side
lateral support straps.
2. Unlock central buckle using release
button on harness.
3. Slide shoulder straps off child’s
shoulders and gently remove child’s
arms from harness.
4. Once legs are safely through, gently
t child’s arms through shoulder
straps – the shoulder straps should
be very slack. Ensure shoulder strap
pads are on child’s shoulders.
WeGo User Manual p9

English
Ensure the product has been cleaned
thoroughly in accordance with
Section 5 of this manual to ensure
infection control.
Ensure a copy of the user manual is
supplied with the product. If in any
doubt about the continued safe use
of your Firey by Leckey product or
if any parts should fail, please cease
using the product and contact our
Firey Customer Services team as
soon as possible on:
customer.enquiries@reyfriends.com
SECTION 09:
REISSUING FIREFLY
PRODUCTS
SECTION 08:
PRODUCT
INSPECTION
We recommend that various checks of
the equipment are carried out before
each use to ensure the product is safe.
1. Check upholstery for signs of wear
and tear.
2. Check all buckles are in full
working order.
3. Check all folding elements are
secure and operating correctly
before each use.
4. Ensure that all locking devices
are engaged before use.
5. Check the brakes are in full
working order.
6. Do not use the pushchair if any
part is damaged or missing.
p10 WeGo User Manual

English
1. Open the frame of the WeGo by
pulling up the handlebar and
placing your foot on the rear axle
tube as indicated. A
2. Lift the handle Buntil you hear
a click, this will indicate the frame
is locked open. C
3. Ensure the safety locks are
both engaged.
1. Lift the pushchair rear axle tube and
insert the rear wheel axle until you
hear a click, this will indicate the
wheel is locked into position.
Repeat for the second wheel.
2. Ensure the wheels are installed
properly before using the WeGo.
To inspect, pull the wheel to make
sure it is locked into position.
SECTION 10:
SETTING UP
YOUR WEGO
10.1  REAR
WHEEL ASSEMBLY
B
A
C
WeGo User Manual p11

English
10.2  FRONT
WHEEL ASSEMBLY
10.3  USING
THE BRAKE
1. Lift the pushchair front axle tube
and insert the front wheel axle until
you hear a click, this will indicate
the wheel is locked into position.
Repeat for the second wheel. A
2. Ensure the wheels are installed
properly before using the WeGo.
To inspect, pull the wheel to make
sure it is locked into position.
3. To lock the front wheels into position,
align them into a straight forward
position and slide the front wheel
lock guide down. A
4. To unlock the front wheels,
slide the front wheel lock guide up.
1. To enable the brake press foot
down on red brake bar until
wheels are locked.
2. To release brake pull red brake bar
back up to original position.
A
A A
A
p12 WeGo User Manual

English
1. To adjust the handlebar,
press the black buttons on the
inside of the handlebar assembly
to adjust the handlebar to the
preferred position. A
10.4  ADJUSTING
THE HANDLEBAR SECTION 10.5  ATTACHING THE HOOD
1. Attach the plastic prong to the
pushchair by sliding it into
the attachment shown. A
2. Feed the plastic rods through the
material of the hood as shown in
the image.
Continued
A
A
WeGo User Manual p13

English
3. Insert the rods into the plastic
prongs on both sides of the
pushchair and push down. B
4. Loop the black elastics around hooks
on the back of the pushchair frame.
5. Connect the Velcro on the hood
to ensure the hood is secure. C
B
C
C
p14 WeGo User Manual

English
SECTION 10.6 
ATTACHING
THE RAIN COVER
Top tip – To put the backrest
in a fully upright position, pull it
forward and tighten as much as
possible before attaching the hood
1. Starting with the footrest,
pull the rain cover over the pushchair
and pull up over the hood and
down the back of the WeGo.
2. Pull the wings down the side
and secure inside the frame. A
3. Loop the black elastics around
hooks on the back of the
pushchair frame. B
A
B
WeGo User Manual p15

English
SECTION 10.7 
ATTACHING
THE FOOTMUFF
1. Pull the footmuff over the footrest
and feed the toggles through
the loops on both sides
of the pushchair. A
SECTION 10.8 
ATTACHING THE
MOSQUITO NET
1. Place the mosquito net over
the pushchair and attach using
the toggles – feed the toggles
through the loops on both sides
of the pushchair.
SECTION 10.9 
ATTACHING
THE CUP HOLDER
1. Slide the cup holder into the xing
on the right side of the
pushchair frame.
Warning: Please only
use cold drinks in the
cup holder
Children should not be
left unattended /
unsupervised at any
time in this product.
Please ensure all
footmuff adjustment
parts are kept away
from the child.
A
p16 WeGo User Manual

English
SECTION 11: ADJUSTING THE WEGO
11.1  ADJUSTING
THE BACKREST
1. To adjust the backrest backwards,
pull the grey plastic lever toward
yourself to your preferred angle. A
2. To adjust the backrest to an upright
position, pull the grey plastic
D – rings to your preferred angle. B
3. To get the seat in a fully upright
position push the backrest up
beyond the frame and tighten
by pulling the plastic D–rings.
Warning – never attempt
to adjust the WeGo
when a child is occupying
the seat
A
B
Seated
angle 15°
Seat to back
angle 100° Full recline 140°
WeGo User Manual p17

English
11.2  ADJUSTING
FOOTREST
1. To x the footrest in the shortest
setting, push up as far as it will
go and secure the top popper
on each side on the fabric. Please
ensure they are fully engaged.
2. To x the footrest in the longest
setting, release the poppers
and pull down until the locking
pin has clicked and engage
lower poppers on each side.
3. Footplate can be tilted to preferred
angle by pressing the white button
on the side hinge of the footplate.
p18 WeGo User Manual

English
SECTION 12:
USING THE GOTO
SEAT WITH THE WEGO
1. Make sure all straps on the GoTo Seat
are loose and not fastened to each
other. Place the GoTo Seat
into the pushchair.
3. Pull straps outwards to tighten. A
4. Tidy excess straps into loops
and secure into the clips. B
5. Ensure all black straps are securely
fastened around the pushchair
and the ve – point buckle at
the front is unfastened before
placing the child in the GoTo Seat.
2. Feed the straps through the slots
shown and fasten on both sides.
A A
B B
Continued
WeGo User Manual p19

English
Make sure the straps
are not twisted when
the buckle is closed.
Smaller child Larger child
Before beginning, ensure shoulder,
lateral support and groin straps
are all loose and unfastened.
Attach the two lateral support
fastenings to the sides of the
mid–point buckle. A
Once fastened, adjust the shoulder
straps, lateral support straps and groin
strap by pulling the straps to tighten. B
In Size 2 GoTo the groin strap mounting
location can be moved backwards or
forwards to suit your child’s needs.
Ensure it is rmly tted to the plastic
GoTo base. C
SECTION 12.1:
OPENING & CLOSING
THE 5 POINT BUCKLE
B B
B
C
A
p20 WeGo User Manual