
p6 GottaGo User Manual
SECTION 04: Terms of
Warranty
The warranty for GottaGo applies only
when the product is used according
to its intended use, following all
manufacturer’s specications. A
one year warranty is provided
with this James Leckey Design Ltd.
manufactured product.
Goods can be returned to us for
warranty, repair or replacement up
• Never leave the child unattended
whilst seated in the product.
• Always check that the footplate
is secure before the user is
transferred into the seat and the
foot straps are secured after the
safety belt has been applied
• Warning Finger Trap Hazard:
Take care that the ngers of the
operator, or children in the vicinity
do not get trapped in the spaces
between the seat and the frame.
• Warning Occupant security:
Ensure that all of the occupant
harnesses and especially the foot
straps are fastened and adjusted
to hold the occupant securely in
place before toileting. Never leave
the child unattended whilst seated
in the GottaGo.
General Care
• Caution Cleaning: Clean the
GottaGo regularly to prevent
the build up of dirt on the
seating elements and the frame.
Accumulated dirt can prematurely
wear the seat mouldings and
encourage corrosion in the frame.
Only use non-abrasive household
cleaners and moist cloths.
• Caution Cleaning Power Washers/
Hoses: Do not use hoses or power
washers on the frame, the frame is
not sealed against running water
and may be damaged by water.
• The GottaGo Backpack can be
machine washed at 40C. Do not
tumble dry.
• Caution Storage: The product
should be kept away from all direct
sources of heat, including naked
ames, cigarettes, electric and gas
heaters.
• Caution Bringing into Use: When
bringing the GottaGo out from
storage, allow it to acclimatise
to ambient temperature rst.
Wipe off any moisture that has
condensed on the product.
• Caution Disposal: Only dispose of
the GottaGo in a community waste
disposal site under the correct
recycling category.
Further Cleaning Metal and Plastic
Components
• Soap and water or antibacterial
spray can be used for daily
cleaning.
• Do not use solvents to clean plastic
or metal components.
• Always ensure the product is dry
before use.