Kohler VIA K-18609T-W User manual

BEFORE YOU BEGIN
·
·
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning, and
warranty information-please leave instructions for the
consumer.
ORDERING INFORMATION
VIA Wall-hung Toilet............................................K-18609T-W
Includes VIA Wall-hung Toilet Bowl...............K-19720T-W
Includes Quiet-close Toilet Seat.....................K-17660T-M
3/4.5L VIA Wall-hung Toilet W/4141T...............K-18609T-BW
Includes VIA Wall-hung Bowl.........................K-19720T-W
Includes Quiet-Close Toilet Seat ....................K-4141T-2P
NOTES
·
·
·
·
·
·
·
·
Observe all local plumbing and building codes.
Shut off the water supply.
Seat post holes are on 140mm centers.
Passageways is longer than 60mm.
Ensure have the correct roughing-in dimensions.
.
Be very careful while working with vitreous china products.
Vitreous china can break or chip if the bolts or nuts are
overtightened, or if carelessly handled.
Carefully inspect the new bowl for any sign of damage.
See
Fig.#1
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2013).
The product complies with GB 6952-2015.·
VIA
INSTALLATION INSTRUCTIONS
VITREOUS CHINA WALL-HUNG P-TRAP TOILET
K-18609T-W/K-18609T-BW
·
·
·-
................................................K-18609T-W
...............................K-19720T-W
..........................................K-17660T-M
3/4.5 ..................................K-18609T-BW
...............................K-19720T-W
........................K-4141T-2P
·
·
·
·
·
·
·
140mm
60mm
1
·
·
ASME (A112.19.2-
2013)
GB 6952-2015
-1-
No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137
2 528137
8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA POST CODE: 256410
8 256410
©
©
Copyright Kohler China Investment Co., Ltd. 2017
2017
1132463-T01-C

TOOLS AND MATERIALS REQUIRED
(Not supplied)
·254mm adjustable wrench
Metal file (file cut)
Tape measure
Tubing cutter
Level
Hacksaw
Putty knife
Screwdriver
Straight pipe coupling
Connection packing
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
254mm
-2-
ROUGHING-IN
1. INSTALL THE TANK
1) Turn the water supply off before installing the new toilet.
2) Install the concealed tank system in wall before decorating
the wall.
3) Install the tank system per tank's installation instructions.
Recommended tanks (Fig.#2-a) and faceplates
Kohler in-wall tank and faceplate
1) K-6281T-W-NA (3/4.5L)
2) K-4179T-NA (3/4.5L)
Faceplates to be matched are K-4177T-CP or K-8857T-CP.
INSTALLATION
Unit: mm
:
Reference Value
Fig.#2
2
Fig.#1
1
1.
1)
2)
3)
( 2-a)
1) K-6281T-W-NA (3/4.5L)
2) K-4179T-NA (3/4.5L)
K-4177T-CP K-8857T-CP
Kohler reserves the right to change marked dimensions without prior notice.
140
295
590
475
360
400
375
360
292
353
322
218
90
55
102
1132463-T01-C

2. SET THE SPACING OF THE BOWL
After you install the tank, be careful to set the spacing of set
aside the length for carrier studs and tighten nut. The bowl on
wall according to the dimensions as shown. See Fig. #3.
2.
3
3. ATTACH CONNECTION PIPE
1) Attach inlet pipe which set aside the length to the
concealed tank.
2) Attach outlet pipe to the toilet.
3) You may apply some lubricant to help connect smoothly.
4) Please tilt the outlet pipe a little after it is installed to
prevent water storage.
See Fig. #4.
See Fig.#5.
3.
1)
2)
3) 4
4) 5
Fig.#3
3
-3-
Fig.#4
4
Fig.#5
5
Inlet
Outlet
355
320
Unit: mm
:
178
215
35
Nut
10
Carrier Stud
1
NOTE: Please reserve 10mm space for
the nut strictly according to the
picture. Otherwise, it will greatly
affect the loading capacity of the
toilet.
10mm
1132463-T01-C

-4-
4. INSTALL THE NEW TOILET
1) Install the accessory kit into the installing hole.
2) Place the new toilet on the wall through the carrier.
3) Use wrench to tighten accessories and level the toilet.
Then finish fixation.
4) Insert the cap into installing hole. See Fig. #6.
4.
1)
2)
3)
4) 6
5. Apply sealant to make sure the bowl,s edge seals to the
wall. See Fig. #7.
5. 7
10
Fig.#6
6
Fig.#7
7
6. Install the toilet seat according to its installation instructions. 6.
1132463-T01-C

-5-
0C
o
CONSUMER RESPONSIBILITIES
If you live in a hard water area, make certain that the holes in
the toilet rim are kept clean to ensure proper bowl flushing.
Toilet bowl cleaners should be used at least once a week.
Use a long-handled brush to clean the rim holes, and to clean
as far into the trap as possible to prevent mineral deposits
from forming.
Most toilet bowl cleaners are not harmful to the vitreous china
surface of the toilet bowl. Please follow the bowl cleaner
manufacturers instructions carefully.
Do not use abrasive cleaners or solvents.
Do not use in-tank cleaners. Products containing
chlorine (calcium hypochlorite) can seriously damage
fittings in the tank. This damage can cause leakage
and property damage.
Kohler Company shall not be responsible or liable for any
damage to these tank fittings caused by the use of cleaners
containing chlorine (calcium hypochlorite).
WARNING: Risk of property or product damage.
'
Please do not use hard materials (like
scouring pad) to clean product surface, especially the
product logo.
CAUTION:
CAUTION: Don t use any cement while installing
the toilet.
WARNING: Risk of product damage.
Heat expansion of the toilet may damage
the feet of the toilet. Kohler will not be responsible for
any damage because of using cement.
Do not throw into the toilet what is easy to block it,
such as newspaper, paper pilch, sanitary towel.
Do not bump the vitreous china with great force to
prevent it from damaging and leaking.
Do not use the product in the water below 0 C.
o
1132463-T01-C