Firehawk FH150 User manual

Pressing the TEST BUTTON
when the full alarm is sounding will
SILENCE THE ALARM FOR 10
MINS. For safety reasons it cannot
be selected in advance.
Smoke & Heat Alarms Guide
ALWAYS read the ENTIRE
handbook and keep it in a
safe place! ALWAYS make
sure you understand the
lights and sounds.
Fireblitz Extinguisher Ltd Units 15/17 Manford Industrial Estate, Manor Road, Erith, Kent DA8 2AJ.
Tel: [phone] |Fax: [phone] |Email: sales@fireblitz.co.uk |www.fireblitz.co.uk
Fireblitz reserve the right to change the design or specification details without prior notice.
REF: COL&S 01/2021
Important
information
FH150/155/160
Compact design
&
TSE-Technology
FHB10
FEATURING
X-Profile
&
TSE-Technology
FHB10W
FEATURING
X-Profile
&
TSE-Technology
FHH10
FEATURING
Advanced
THERMISTOR
Protection
FHH10W
FEATURING
Advanced
THERMISTOR
Protection
FireHawk Smoke and Heat Alarms have a LOW BATTERY
SILENCE Feature. Pressing the TEST BUTTON when the Low
Battery Warning system is activated will
SILENCE THE WARNING FOR
10 HOURS. Have a good nights
sleep and change the alarm the
following day. For safety reasons it
cannot be selected in advance.
USER MANUAL ALARM SILENCE
LOW BATTERY SILENCE
SOUNDER
HEAT
SENSOR
RED LED TEST
BUTTON

Fireblitz Extinguisher Ltd Units 15/17 Manford Industrial Estate, Manor Road, Erith, Kent DA8 2AJ.
Tel: [phone] |Fax: [phone] |Email: sales@fireblitz.co.uk |www.fireblitz.co.uk
Fireblitz reserve the right to change the design or specification details without prior notice.
REF: COL&S 01/2021
GUIDE TO
Smoke & Heat
Alarm Location
SMOKE ALARMS HEAT ALARMS
BEDROOM BEDROOM
BEDROOM
BASEMENT
LOUNGE KITCHEN GARAGE
CORRECT LOCATION IS IMPERATIVE IF
NUISANCE ALARMS ARE TO BE AVOIDED!
SMOKE ALARM FOR MINIMUM PROTECTION
SMOKE ALARM FOR INCREASED PROTECTION
HEAT ALARMS
Do NOT place in a draft.
Do NOT place near bathrooms
and showers
Do NOT place in kitchens - use
heat alarms there
KEEP AWAY from vents or
extractor fans
Do NOT place directly above
heaters, radiators or in front of
air conditioning units
Do NOT place in insect infested
areas (attics, garages etc) - use
heat alarms there
KEEP 300mm AWAY from
lights that generate heat.
(Tungsten and low voltage bulbs)
KEEP AWAY from objects that
could divert or prevent smoke
from reaching them, ie beams
and other ceiling features.
REMEMBER, heat alarms need a fire to activate,
flames WILL be present.
Do NOT install on walls
Do NOT use in escape routes
ALWAYS interlink to smoke alarms
Do NOT use in lounges, bedrooms and separate
dining rooms where smoke alarms are best
AVOID use in areas where children, the elderly and
disabled are normally present
DESIGNED for kitchens, garages, cellars, attics where
steam, vapours, dust, and cobwebs may cause nuisance
alarms from smoke alarms
KEEP 300mm AWAY from lights and appliances
that generate heat. (Tungsten and low voltage bulbs)
(Sensor temperature range 54°C – 65°C )
KEEP AWAY from objects that could divert or prevent
smoke and heat from reaching them, ie beams and
other ceiling features.
KEEP AWAY from extractor fans

Fireblitz Extinguisher Ltd Units 15/17 Manford Industrial Estate, Manor Road, Erith, Kent DA8 2AJ.
Tel: [phone] |Fax: [phone] |Email: sales@fireblitz.co.uk |www.fireblitz.co.uk
Fireblitz reserve the right to change the design or specification details without prior notice.
REF: COL&S 01/2021
GUIDE TO
Alarm
Installation
ADAPTOR BASE PLATES
FIX BASE TO CEILING
FIXING ALARM TO BASE REMOVING ALARM FROM BASE
Fireangel base adaptor DICON base adaptor KIDDE base adaptor
Plugs and screws Sticky pads Adhesive
Often you’ll find old bases from other smoke and heat alarm manufacturers
perminantly fixed to ceilings. We can provide you with base plate adaptors so
that you can easily install FireHawk alarms to existing bases.
We recommend these three ways to fix your smoke or heat alarm base to your ceiling.
Simply line up the vertical line on the alarm with the
arrow on the base, then twist clockwise.
Simply press securuty tag here and
twist anti-clockwise to release

Smoke & Heat Alarms
Fireblitz Extinguisher Ltd Units 15/17 Manford Industrial Estate, Manor Road, Erith, Kent DA8 2AJ.
Tel: [phone] |Fax: [phone] |Email: sales@fireblitz.co.uk |www.fireblitz.co.uk
Fireblitz reserve the right to change the design or specification details without prior notice.
REF: COL&S 01/2021
GUIDE TO
Maintenance &
Troubleshooting
END USER MAINTENANCE
REMEMBER - The overriding instruction is to ALWAYS follow the manufacturers guidance.
Test the alarm once a week to ensure it is still operating. ONLY use the test button.
Do NOT use smoke or flame. It is dangerous, will contaminate the alarm and give misleading results
If you must use canned smoke on smoke alarms follow the manufacturers instructions.
Vacuum the alarm to keep the vents clear of dust and insects
Every six months clean the alarm with a damp cloth
(do not use spray or chemical cleaners and polishes)
In the event of a problem, contact our helpline: 0800 008 6568
TROUBLE SHOOTING
Be sure which alarm has been the problem, upstairs, downstairs, heat or smoke.
Are the alarms interlinked? If so check which one has a fast flashing red light during an alarm –
that’s the one that has set the system off.
Where is it installed? (refer to “Do nots..” list in manual and earlier)
If it is in a poor location this might be causing nuisance alarms.
What is the alarm doing? i.e. single or double beeps, nuisance alarms etc.
Was the occupier cooking, cleaning, dusting, using aerosol spays etc.?
if so these may have caused the alarm to sound due to contamination.
Has there been any decorating or building work recently?
if so this may have contaminated the alarm and caused nuisance alarms
Has there been outside fires, bonfires, chimneas, fire pits etc.?
if so, the smoke may have got into the property via doors, windows and vents.

Fireblitz Extinguisher Ltd Units 15/17 Manford Industrial Estate, Manor Road, Erith, Kent DA8 2AJ.
Tel: [phone] |Fax: [phone] |Email: sales@fireblitz.co.uk |www.fireblitz.co.uk
Fireblitz reserve the right to change the design or specification details without prior notice.
REF: COL&S 01/2021
GUIDE TO
Lights &
Sounds
Smoke & Heat Alarms
POWER IS OK Red LED flashes every minute followed by
a single beep after 10 seconds if the battery power is weak
GENERAL FAULT Double beep every minute
TEST BUTTON JAMMED Single beep every 11 seconds
TEST Red LED flashes twice every second, plus a series of three beeps
ALARM SILENCE Red LED flashes once every 10 seconds
FULL ALARM Red LED flashes twice every second
plus a series of three beeps every 4 seconds
EVACUATE THE PROPERTY IMMEDIATELY AND CALL THE EMERGENCY SERVICES!
FH150/155/160
Compact design
&
TSE-Technology
FHB10
FEATURING
X-Profile
&
TSE-Technology
FHB10W
FEATURING
X-Profile
&
TSE-Technology
FHH10
FEATURING
Advanced
THERMISTOR
Protection
FHH10W
FEATURING
Advanced
THERMISTOR
Protection