FireKing PG209T-B User manual

Call Customer Service Hotline
1-855-242-6887
CARBON MONOXIDE HAZARD
This appliance can produce
carbon monoxide which has no
odor.
Using it in an enclosed space can
kill you.
Never use this appliance in an
enclosed space such as a
camper, tent, car or home.
WARNING
For outdoor use ONLY!
DO NOT RETURN TO THE STORE
Question, Problems, Missing parts?
Before running to your retailer, call our customer
service department at 1-855-CHANT-US
(1-855-242-6887) from 8:00am to 5:00pm Eastern
time, Monday through Friday.
MODEL NO.: PG209T-B
DANGER
If you smell gas:
1.Shut off gas to the appliance.
2.Extinguish any open flame.
3.If odor continues, keep away from the appliance and
immediately call your gas supplier or fire department.
WARNING
Improper installation, adjustment, alteration, service
or maintenance can cause property damage, injury or
death.
Read and follow all the warnings, installation,
operating and maintenance instructions thoroughly
before assembling and using this equipment.
Failure to follow these instructions could result in fire
or explosion, which could cause property damage,
personal injury or death.
WARNING
Do not store or use gasoline or other flammable vapors
and liquids in the vicinity of this or any other appliance.
An LP-cylinder not connected for use shall not be
stored in the vicinity of this or any other appliance.
GAS TABLETOP FIRE
DANGER

2
TABLE OF CONTENTS
Product Specifications.....................................................................................................................2
Safety Information..........................................................................................................................3
Package Contents............................................................................................................................6
Assembly Instructions.....................................................................................................................7
Safety Check....................................................................................................................................9
Lighting Instructions.......................................................................................................................10
Care and Maintenance...................................................................................................................11
Troubleshooting..............................................................................................................................13
Warranty........................................................................................................................................14
Replacement Parts list....................................................................................................................15
PRODUCT SPECIFICATIONS
Product Specifications
Overall Dimension
20.28x18.7x12.6inches
Rated Heat Input
11000BTU/HR
Fuel
Propane-LP
Gas Supply
20-Lb LP-Gas cylinder
Manifold Pressure
11 inches W.C
Injector Size (diameter)
1.0mm
Safety Features
Thermocouple
Gas Supply Pressure
Max 150 PSI, Min 5 PSI
Manufacturer:
Guangdong Chant Group Inc.
No.42 Xiaolan Industrial Road South Zhongshan, Guangdong 528415, China
Please call 1-855-CHANT-US (1-855-242-6887) for any assistance
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call our customer service at
1-855-CHANT-US (1-855-242-6887) from 8:00am to 5:00pm Eastern time, Monday through Friday
for assistance.
The installation must conform with local codes or, in the absence of local codes, with the National

3
Fuel Gas Code, ANSI Z223.1 /NFPA 54, Natural Gas and Propane Installation Code, CSA B149.1, or
Propane Storage and Handling Code, B149.2.
Minimum clearances from combustible material: Side-48 inches, Rear-48 inches, Ceiling-72 inches.
THIS UNIT IS INTENDED FOR OUTDOOR USE ONLY! This product shall be used outdoors, in a
ventilated space and shall not be used in any enclosed area.
Do not use this outdoor gas fire table for indoor heating. TOXIC carbon monoxide fumes can
accumulate and cause death.
This unit is to be used with propane gas only! (sold separately).
Never leave this unit unattended while in use.
Converting this unit to natural gas is dangerous and not recommended. The conversion of this unit
will void the manufacturer warranty.
Place the propane hose with regulator assembly out of pathways where people may trip over it or
in areas where the hose will not be subjected to accidental damage.
Materials or items when stored under the fire table will be subjected to intense heat and could be
seriously damaged.
Clothing or other flammable materials should not be hung on the fire table, or placed on, under or
near the unit.
Children and adults should be alerted to the hazards of high surface temperatures and should stay
away to avoid burns or clothing ignition.
Young children should be carefully supervised when they are in the area of this unit.
Any guard or other protective device removed for servicing the fire table must be replaced prior
to operating the fire table.
Installation and repair should be done by qualified service person. This unit should be inspected
before use and at least annual by a qualified service person.
More frequent cleaning may be required as necessary. It is imperative that the control
compartment, burners and circulating air passageways of the fire table to kept clean.
Keep the appliance area clear and free from combustible materials, gasoline and other flammable
vapors and liquids.
Do not obstruct the flow of combustion and ventilation air.
Solid fuels or Charcoals shall not be burned in this unit.
This unit is not intended for cooking.
Do not add water into the unit.
Keep away from the unit for the first 20 minutes after igniting your unit for the first time, as the
rocks could pop out and cause injury. Should any rocks pop out, discard them.
Do not light or use the gas unit if rocks are wet. Ensure rocks are completely dry before lighting as
intense heat could cause the rocks to crack. Failure to do so could hit somebody’s face or eyes
during the initial start of this unit.

4
SAFETY INFORMATION
Keep the ventilation opening(s) of the cylinder enclosure free and clear from debris. Use this
appliance in a well-ventilated space only. Do not use it in a building, garage, or any other enclosed
area.
Use this appliance in outdoor areas described below:
(a) With walls on all sides, but at least one permanent opening at ground level and no overhead
cover.
(b) Within a partial enclosure that includes overhead cover and no more than two walls. These
walls may be parallel, or at right angles to each other.
(c) Within a partial enclosure that includes overhead cover and no more than two walls. The
following shall apply:
(i) One wall that is equivalent to at least 25% of the total wall area is completely open.
(ii) 30% or more in total of the remaining wall area is open and unrestricted.
This fire table is designed for use with a 20 lb. liquid propane gas
(LP) tank. The LP-gas supply cylinder to be used must be:
(a) Constructed and marked in accordance with the
Specifications for LP-gas cylinders of the U.S. Department of
Transportation of Dangerous Goods and Commission,
CAN/CSA-B339, as applicable;
(b) Provided with a listed overfilling prevention device; and
(c) Provided with a cylinder connection device compatible with
the connection for the appliance.
If the propane gas tank is leaking gas, you may hear, see, or smell
a hiss. Do the following:
(a) Disconnect the propane gas tank.
(b) Do not attempt to fix the problem yourself.
(c) Contact your gas supplier or fire department for help.
A leak test should always be performed after attaching the connection to the LP gas cylinder
service valve.
Disconnect the cylinder when the appliance is not in use.
Check for leaks after not using the unit for long period of time.
Storage of an appliance indoors is permissible only if the cylinder is disconnected and removed
from the appliance.
Store the cylinder outdoors in a well-ventilated area (not in a building, garage, or other enclosed
area) out of the reach of children.
The cylinder used must include a collar to protect the cylinder valve.
Do not store a spare or disconnected liquid propane cylinder under or near this unit..
Never fill the cylinder beyond 80 percent full;
Place the dust cap tightly on the cylinder valve outlet whenever the cylinder is not in use. Install
only the type of dust cap on the cylinder valve that is provided with the cylinder valve. Other
types of caps or plugs may result in a propane leak.
Inspect the visible portion of the hose before each use of the appliance.

5
SAFETY INFORMATION
Every part of the unit shall be secure against displacement and shall be constructed to maintain a
fixed relationship between essential parts under normal and reasonable conditions of handling
and usage. Parts not permanently secured shall be designed so they cannot be incorrectly
assembled and cannot be improperly located or misaligned in removing or replacing during
cleaning or other servicing.
Do not use this unit if any part has been under water. Immediately call a qualified service
technician to inspect the appliance and to replace any part of the control system and any gas
control that has been under water.
Never let the regulator & hose assembly touch with the ground when it is disconnected. Make
sure the regulator & hose assembly place onto the hook when not in use.
Certain areas of this outdoor fire table when in use will become too hot to touch. Do not touch
hot surfaces until the unit has cooled unless you are wearing protective gear such as insulated pot
holders or heat resistant gloves or mittens to avoid burns.
Remove the PVC cover from the unit before attempting the operating.
Always use this outdoor fire table on a hard, level non-combustible surface such a concrete, rock
or stone. An asphalt or blacktop surface may not be acceptable for this purpose. Surfaces such as
dirt and grass may prevent the unit from having proper ventilation.
DO NOT use this outdoor fire table until it is COMPLETELY assembled and all parts are securely
fastened and tightened.
DO NOT use this outdoor fire table near automobiles, trucks, vans or recreational vehicles.
DO NOT use this outdoor fire table under any overhead structure combustible constructions.
Avoid using near or under overhanging trees and shrubs.
The use of alcohol, prescription or non-prescription drugs may impair an individual's ability to
properly assemble or safely operate this outdoor fire table.
CALIFORNIA PROPOSITION 65 WARNING:
(a) Combustion by-products produced when using this product contain chemicals known to the
State of California to cause cancer and birth defects or other reproductive harm.
(b) Handling the brass material on this product exposes you to lead, a chemical known to the
State of California to cause cancer and birth defects or other reproductive harm. Wash hands
after handling.
(c) This product contains chemicals, including lead and lead compounds, known by the State of
California to cause cancer, reproductive harm, or other birth defects.
(d) Wash your hands after using this product.

6
PACKAGE CONTENTS
PARTS LIST
PART
DESCRIPTION
QUANTITY
PART
DESCRIPTION
QUANTITY
A
Glass
1
E
Glass beads
2KGS
B
Burner
1
C
Pilot Box
1
D
Knob
1
A
C
B
E
D

7
ASSEMBLY INSTRUCTIONS
Before beginning assembly of product, make sure all parts are present and compare parts with
package contents list. If any part is missing or damaged, do not attempt to assemble the product.
1. Place the glass on the inside step of the fire pit, press the glass with the bracket and lock the screw(AA).
1
Check that the control knob (F) is turned to the OFF position before starting any
assembly.
2
HIGH
LOW
OFF
Glass tube

8
ASSEMBLY INSTRUCTIONS
Warning: Before connecting, be sure that there is no debris caught in the head of the LP gas
cylinder head of the regulator valve or in the head of the burner and burner ports.
Check for leaks after connecting the gas cylinder every time according to the “Checking for Leaks”
section on page 9.
Close the gas cylinder lid when burner is in operation.
3
Connect the tank
Connect Hose & Regulator Assembly to 20lb.LP-gas
cylinder (sold separately).
Line up threads on fitting with those on regulator and
rotate clockwise until tighten by HAND ONLY.
DO NOT USE ANY HAND TOOLS TO MAKE THIS
CONNECTION. Be careful not to cross threads when
screwing in fitting.
To disconnect the LP-Gas cylinder, first make sure the
cylinder valve is “OFF”.
Then, turn the knob on the regulator Counterclockwise
until it is loose.

9
ASSEMBLY INSTRUCTIONS
SAFETY CHECK
LIGHTING INSTRUCTIONS
6
Place glass beads
CAUTION: DO NOT dump glass beads out of Packaging. Carefully place beads by hands
so dust does not clog burner.
CAUTION: DO NOT cover the pilot box with Glass beads. Always keep the pilot box
visible.
Check for leaks
Before performing a leak test, be sure that no sparks can occur
and you are in a spacious outdoor area. Connect the propane gas
tank to the regulator and turn the valve on the unit to the OFF
position.
To check the connection at the gas hose/regulator/cylinder:
a. Make leakage solution by mixing 1 part liquid dish soap and 3
part water.
b. Spoon or brush several drops (or use squirt bottle) of the
solution onto the gas hose/regulator and regulator/cylinder
and hose connection.
c. Turn on gas cylinder valve. Inspect the connections and look
for bubbles.
d. If no bubbles appear, the connection is safe.
e. If bubbles appear, there is leakage. Loosen and re-tighten this
connection. If it still leaks, please call customer service at:
1-855-CHANT-US (1-855-242-6887).

10
Note:
Visually check the burner flame against the illustrations:
Flame should be blue with slight yellow tips.
You should see a smaller flame in LOW position than seen
on HIGH. Perform flame check prior to each use. If only low
flame is seen, refer to “Burner flame is low” in the
“TROUBLESHOOTING” on page 13.
Using a long match/lighter to light
1. Check the control knob is in the OFF.
2. Position a long lit match or lighter close to the
Pilot box.
3. Push control knob in and rotate to PUSH.
The burner should lit within 5 seconds
4. If the burner fails to stay lit or becomes
extinguished, turn the burner control knob to
OFF, wait 5 minutes for gas to clear and then
repeat step 3.
NOTE: If the burner does not ignite within the first few attempts of match/Lighter lighting, there is a
problem with the gas supply. Turn off the gas at the burner and tank. DO NOT attempt to operate the
unit until the problem is found and corrected. Please call the customer service department at
1-855-CHANT-US (1-855-242-6887) from 8:00am to 5:00pm Eastern time, Monday through Friday for
assistance.
1. Check the control knob is in the OFF position.
2. Turn on the LP tank valve slowly.
3. Push the knob in and turn slowly to produce a
spark.Once burner is lit, continue to hold the
control knob for 30 seconds. Then the burner
should stay lit.
4. If the burner fails to stay lit or becomes
extinguished in 30 seconds, turn the control knob
to OFF, wait 5 minutes for gas to clear and then
repeat step 3.
5. To desired heating level rotate knob from HIGH
to LOW.
6. To turn off, turn the knob to PUSH first, then push
in and turn to OFF. Turn off the gas tank valve
before disconnecting the LP gas tank.
HIGH
LOW
OFF

11
CARE AND MAINTENANCE
Cleaning
Abrasive cleaners will damage this product.
Never use oven cleaner to clean any part of fire table.
Do not clean any fire table part in a self-cleaning oven. The extreme heat will damage the finish.
More frequent cleaning may be required as necessary. It is imperative that control compartment,
burners and circulating air passageways of the fire table be kept clean.
Spiders and insects can create a dangerous condition that may damage fire table or make it
unsafe. Keep burner area clean of all spiders, webs or insects. Clean burner holes by using a
heavy-duty pipe cleaner. Compressed air may help clear away smaller particles.
Carbon deposits may create a fire hazard.
Do not clean fire table with combustible or corrosive cleaners. Use warm, soapy water.
This fire table should be thoroughly cleaned on a regular basis.
Wipe surfaces clean with mild dish detergent or baking soda. Rinse clean with water.
For stubborn surfaces use a citrus-based degreaser and a nylon scrubbing brush.
After the burner and rocks are completely cooled down, use a soft brush to get rid of the mild
stains, loose dirt and soil. Wipe with a soft cloth.
Stubborn stains, discoloration and possible rust pitting can occur from exposure to harsh outdoor
conditions.
Be careful not to let any powder or solvent come in contact with painted or plastic components
as damage may occur.
Note: While cleaning the unit, be sure to keep the area around the burner dry at all times. Do not
submerge the control valve assembly. If the gas control is submerged in water, do NOT use it. It
must be replaced.
Maintenance
Keep exterior surfaces clean.
Store the fire table in a cool dry place away from direct sunlight.
The propane cylinder must be disconnected and stored outdoors before the fire table can be
stored indoors.
Use Manufacturer approved or supplied replacement parts and accessories only. Otherwise may
void the warranty of this product and result in a hazardous condition.
Please contact the Manufacturer for information regarding replacement, valves, ignitor, regulator
etc.
Air flow must be unobstructed. Keep controls, burner and circulating air passageways clean.
Signs of possible blockage include:
Gas odor with extreme yellow tipping of flame.
This unit does NOT reach the desired temperature.
This unit glow is excessively uneven.
This unit makes popping noises.
Note: In a salt-air environment (such as near an ocean) corrosion occurs more quickly than normal.
Frequently check for corroded areas and repair them promptly.

12
CARE AND MAINTENANCE
Inspecting
This outdoor fire table must be inspected regularly to insure that the product is safe to use and to
extend product life.
WARNING: DO NOT inspect this gas fire table until the fire is completely out.
Check the burner to make sure it is securely in place.
Check the Venturi tube to make sure it is clear and free of insects, spider nests and other debris.
Check all gas connections for leaks.
Check ignition system to insure proper sparking.
Check components for any signs of damage, rust or excessive wear.
If damage to any component is detected, DO NOT operate until the proper repairs have been
made.
Storage
CAUTION: Wait until the fire is out and the rocks are cool down before covering.
Between uses or during periods of extended inactivity:
Turn control knob to "OFF".
Disconnect LP cylinder and move to a secure, well-location outdoors.
Carefully remove rock filler and store components flat to protect them from breakage.
Store in a cool, dry location away from children and pets.
ALWAYS cover your outdoor fire table when not in use with the PVC cover( not included).
Note: Never leave LP gas tank exposed to direct sunlight or excessive heat.
If desired, use cover (sold separately) to protect the fire table and help prevent buildup in air
passages.

13
TROUBLESHOOTING
Problem
Possible Cause
Corrective Action
Burner won’t light
Gas pressure is low.
Turn tank valve “OFF” and replace the
tank.
The orifice is blocked.
Clear blockage.
Control knob is not in “High” position.
Turn control knob to “ON”
Burner flame is low
Gas pressure is low.
Turn tank valve “OFF” and replace the
tank.
The control knob is not positioned at
“High”.
Position the control knob at “High”
The burner jet may be partially
blocked.
Clear blockage.
Outdoor temperature is less than 40°F
and tank is less than 1/4 full.
Use a full tank.
Supply hose is bent or kinked.
Straighten the hose.
Carbon build-up
Build-up of carbon can accumulate
over time.
Wipe off before lighting.
Thick black smoke
Blockage in burner
Remove blockage and clean burner
inside and outside.
If these troubleshooting steps are unable to resolve the problem, please call customer service dept at
1-855-CHANT-US (1-855-242-6887) from 8:00am to 5:00pm Eastern time, Monday through Friday for
assistance.

14
WARRANTY
PROOF OF PURCHASE is required to access this warranty program, which is in effect from the
date of purchase. Customers will be subject to parts, shipping, and handling fees if unable to provide
proof of the purchase or after the warranty has expired.
If you have any questions or problems, you can call our customer service department at
1-855-CHANT-US (1-855-242-6887) from 8:00am to 5:00pm Eastern time, Monday through Friday for
assistance.
WARRANTY PROVISIONS
Manufacturer warrants this product for one (1) year from the date of purchase.
This warranty is non-transferable and does not cover failures due to misuse of improper installation or
maintenance.
This warranty is for replacement of defective parts only. We are not responsible for incidental or
consequential damages or labor costs.
This warranty does not cover corrosion or discoloration after the unit is used, or lack of maintenance,
hostile environment, accidents, alterations, abuse or neglect.
This warranty does not cover damage caused by heat, abrasive and chemical cleaners, or any damage
to other components used in the installation or operation of the unit.
Paint is not warranted and may require touch-up. Items considered to be consumable such as
batteries are not covered under this warranty.
Some states do not allow the limitation or exclusion of incidental or consequential damages, so the
above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and
you may also have other rights that vary from state to state.

15
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-855-CHANT-US (1-855-242-6887), 8
a.m. - 8 p.m., EST, Monday - Friday.
1
2
3
12
4
5
6
7
8
9
10
11

16
REPLACEMENT PARTS LIST
V01
PART
DESCRIPTION
PART#
1
Glass
209TB01
2
Ignition Pin
209TA03
3
Thermocouple
209TA04
4
Burner
209TA05
5
Pilot Box
209TA06
6
Thermal Baffle
209TB02
7
Fire bowl
209TB03
8
Table
209TB04
9
Foot Pad
209TB05
10
Bracket
209TB06
11
Knob
209TA11
12
Regulator & Hose
Assembly
209TA12
Table of contents