Fisher & Paykel CK Series User manual

CK models - Controls and starting a wash
To start a wash programme
1. Press and hold
to turn the dishwasher on.
2. Check that the wash programme displayed is the one you would like to use. If not, see section ‘Changing the wash
programme.’
https://producthelp.fisherpaykel.com/Manuals/Dishwasher_Manuals/User_Guides/590719B_Dishwasher/08_CK_models_Con…
Updated: Wed, 17 Nov 2021 18:45:24 GMT
Powered by
1

3. Once the display shows the programme you would like to use, press
to start. The display will show the approximate time remaining and the stage of the wash.
The dishwasher will remember the last programme used.
To pause and restart a wash programme
1. Press
to pause the programme. The programme status (eg ‘Wash’) will flash while the dishwasher is paused.
2. Open the door very slowly.
There is a risk of being sprayed with hot water. Do not fully open the door until the spray
arms have stopped rotating.
3. Load, remove, or rearrange any dishes if needed.
4. Press
to restart the programme. If the dishwasher is not restarted within 7 minutes, it will then beep every few
seconds
Changing the wash programme
The dishwasher will remember the last programme used.
Wash Programme Description
Auto Senses the optimal wash programme for your dishes
https://producthelp.fisherpaykel.com/Manuals/Dishwasher_Manuals/User_Guides/590719B_Dishwasher/08_CK_models_Con…
Updated: Wed, 17 Nov 2021 18:45:24 GMT
Powered by
2

Wash Programme Description
Heavy A wash for heavily soiled dishes
Normal A wash for your everyday dishes
Normal Eco Helps you save energy and water for normal soiled use
Fast A fast wash for lightly soiled dishes
Gentle For all your heat sensitive dishes
Hygiene A wash for sanitising your dishes
Rinse Prevents food from drying on dishes
1. Press
to turn the dishwasher on.
2. Press Program to scroll to the desired wash programme.
• The display will show the wash programme time.
3. Select a wash option (optional)
• Press the ‘Options’ buttons to scroll between ‘Intensive’, ‘1/2 Load’ or off (see ‘Selecting Wash options’).
4. Press
to start the wash programme.
At the end of the programme the dishwasher will beep. The Clean indicator will remain lit and the display will
show
. After 30 seconds the display will turn off.
To cancel a wash programme once it has started
1. Press
to cancel the programme.
If you wish, you can start a different programme.
https://producthelp.fisherpaykel.com/Manuals/Dishwasher_Manuals/User_Guides/590719B_Dishwasher/08_CK_models_Con…
Updated: Wed, 17 Nov 2021 18:45:24 GMT
Powered by
3

you may need to refill the detergent dispenser.
If you do not want to start another programme press
to turn the dishwasher off.
Keylock
This feature disables all the buttons on the dishwasher.
To activate Keylock, press and hold
until the Keylock indicator
lights up.
To cancel Keylock, press and hold
until the Keylock indicator
goes out.
If any other buttons are pressed while Keylock is activated, the Keylock indicator
will flash.
https://producthelp.fisherpaykel.com/Manuals/Dishwasher_Manuals/User_Guides/590719B_Dishwasher/08_CK_models_Con…
Updated: Wed, 17 Nov 2021 18:45:24 GMT
Powered by
4