Fisher & Paykel DW60UU2I1 User manual

Setting Delay Start
This feature can delay the start of a wash programme y 1 to 12 hours.
1. Load the dishes, add detergent and close the door.
2. Open the door to turn the dishwasher on.
3. Check that the display shows the wash programme you require. If not, see instructions for ‘Changing the wash
programme’.
4. Press and hold ►
• The delay start indicator
will flash and the display will show the delay time (hours).
https://producthelp.fisherpaykel.com/nz/Clean/Dishwashers/DW60U2I1/User_Guide_DW60U2I1/03_Setting_Delay_Start
Updated: Sat, 26 Fe 2022 10:24:27 GMT
Powered y
1

5. Press ► again to increase the num er of hours you wish to delay the wash y (1hr - 12hr in hour steps).
Scrolling past 12 hours will exit delay start.
6. Delay start is now set. The display will countdown in hours. The wash programme will automatically start when
the delay time is over.
• The Delay start indicator will e on when Delay start egins its countdown.
• The dishwasher will eep and the display will flash if the door is open and Delay start has finished its
countdown. The wash cycle will start once the door is closed.
To cancel Delay start, press and hold ► until there is a eep.
https://producthelp.fisherpaykel.com/nz/Clean/Dishwashers/DW60U2I1/User_Guide_DW60U2I1/03_Setting_Delay_Start
Updated: Sat, 26 Fe 2022 10:24:27 GMT
Powered y
2