Fisher-Price 3032 User manual

fisher-price.com
3032

DO NOT DISCARD: IMPORTANT LITERATURE. KEEP THIS INSTRUCTION FOR FUTURE REFERENCE. PLEASE READ AND FOLLOW
INSTRUCTIONS CAREFULLY AND IDENTIFY ALL PARTS BEFORE ASSEMBLY.
Consumer Information
2
WARNING
TO AVOID SERIOUS INJURY:
DO NOT install this product on a hard
surface. Any fall onto a hard surface could
result in a head or other serious injury.
Never place on concrete, asphalt, wood,
packed earth or other hard surfaces.
Carpeting over hard floor may not prevent
injury.
• This product is designed for family domestic use only.
Suitable for indoor and outdoor use.
• This product is intended for use by children ages 3-5 years.
• Maximum weight limit: 100 lbs (45 kg) on the seating bench.
Limit 2 children at any one time.
CAUTION
• CHOKING HAZARD – Small parts. This
product contains small parts and sharp
points which are necessary for assembly.
Prior to or during assembly of this
product, keep all components out of
children’s reach. Small parts pose a
choking hazard to children under 3 years
of age.
• Adult assembly required. Phillips /
cross-headed screwdriver required (not
included) during assembly.
• DO NOT allow children to play on this
product until it is completely installed.
• Adult supervision is required. Never
leave children unattended.
• DO NOT allow children to climb or to
stand / sit on the table.

Parts
3
Note: Illustrations not to scale.
G
D
I
J
J
HHI
C
E
A
F
B
FASTENER SHOWN ACTUAL SIZE
# DESCRIPTION QTY
A1
B1
C2
D1
E1
F1
G1
Wall R
Wall L
Storage Panel
Seat Panel
Arm R
Arm L
H4
I2
Seat Back / Table
Screw
Cap
J2Hinge Block
PARTS LIST
Screw - M4 x 1.57 inch / 40 mm - 4

Assembly
4
• Align pegs and holes to attach the Storage Panels (C) to the Wall L (B).
• Press down firmly to place each peg into position.
• Repeat Step 1, place and slot the Wall R (A) onto the aligned piece to complete the bottom storage.
Wall L (B)
Storage Panels (C) Press Down
Wall R (A)
1
2

Assembly
5
Screw (H)
Arm L (F)
Arm R (E)
Seat Back/Table (G)
Cap (I)
• Join R/L Arms (E&F) to the Seat Back/Table (G) by aligning the pegs through the holes.
• Push the pegs downward to lock the panels together.
3
4
• Attach the assembled table to the storage unit by joining the extension arms to the storage’s holes.
• Insert the Cap (I) in the hole by following the arrow mark from the INSIDE WALL.
• Fasterning 2 Screws (H) using a Phillips Screwdriver (not included) to secure the Cap in place.
• Repeat this for the other side.
Press Down

Assembly
6
• Place the Seat (D) over the bottom assembled storage base.
Seat (D)
Hinge Block (J)
Hinge Block (J)
6
• Install the Hinge Block (J) through holes from the arm to the storage wall. Ensure the Hinge Block is press-locked to the assembled
cap in Step 5. Repeat this for the other side.
5

Assembly
7
• Pictures show the completely assembled product.
• To convert Picnic Table to Sitting Bench: Pull both Hinge Blocks gently to loosen the lock from the Caps. DO NOT pull out the Hinge
Block completely.
• Flipping down the arm assembly.
• Press the Hinge Blocks back into place, and make sure they are locked with the Caps.
Press to Lock
Gently Pull to Release Lock
7
• Install the Hinge Block (J) through holes from the arm to the storage wall. Ensure the Hinge Block is press-locked to the assembled
cap in Step 5. Repeat this for the other side.

• Make sure all the parts are securely snapped together before use.
• Please check the unit twice monthly during the usage season for tightness. It is particularly important that this procedure be followed
at the beginning of each season. Replace as needed. If not checked regularly, parts can be loose or missed and components can
become detached and cause injuries.
• DO NOT allow children to climb or to play when the product is wet. It may be slippery when wet.
• DO NOT leave this product exposed to strong wind and inclement weather.
• At the end of each play season or when temperature falls below 32°F/0°C, remove the product and store indoors. In extreme cold
weather, plastic materials lose resilience and may become brittle and crack upon impact.
• Discard all packaging properly after the unit has been assembled.
• Disassemble and dispose of this product in a safe place and manner so as not to present any hazard to any individual at the item when
the product is discarded.
Limited Warranty
Our products are covered under warranty for a period of 60 days from the date of purchase, under normal use and service, against
defective workmanship and material. If you have recently purchased this product and find it to be defective in anyway, kindly return it to
the “Source of Purchase” for a Full Refund or Exchange.
Should the product no longer be covered by your Purchase Receipt, or should you have any questions pertaining to our product, please
call our Toll Free Customer Service for assistance.
Keep a copy of the UPC Code with proof of purchase receipt for any future Warranty Service.
Please retain packaging and assembly instructions for future reference.
Care
FISHER-PRICE and associated trademarks are owned by Mattel, Inc. and used under license from Mattel Europa B.V.
©2012 Mattel, Inc. All Rights Reserved. Manufactured for and designed by Grow’n Up Ltd.
Room 808B, New Mandarin Plaza,
Tsim Sha Tsui East, Kowloon, Hong Kong.
MADE IN CHINA
8
• Pictures show the completely assembled product.
• To convert Picnic Table to Sitting Bench: Pull both Hinge Blocks gently to loosen the lock from the Caps. DO NOT pull out the Hinge
Block completely.
• Flipping down the arm assembly.
• Press the Hinge Blocks back into place, and make sure they are locked with the Caps.
CONSUMER ASSISTANCE
[email protected]
Call toll free 1-888-468-9898 (US & Canada only)
24 hours, 7 days a week
Write to us at: Grow’n Up Consumer Relations,
Room 808B, New Mandarin Plaza, Tsim Sha Tsui East,
Kowloon, Hong Kong.
For countries outside North America:
Email to: [email protected]
www.grow-n-up.com

NE PAS JETER: LITTÉRATURE IMPORTANT. GARDEZ CETTE INSTRUCTION POUR FUTURE RÉFÉRENCE. VEUILLEZ LIRE ET SUIVRE LES
INSTRUCTIONS ATTENTIVEMENT ET IDENTIFIER TOUTES LES PIÈCES AVANT L'ASSEMBLAGE.
Renseignements pour les consommateurs
9
AVERTISSEMENT
POUR EVITER LES BLESSURES GRAVES:
NE PAS installer ce produit sur une
surface dure. Une chute sur une surface
dure pourrait se traduire par la tête ou
d'autres blessures graves. Ne placez
jamais le béton, l'asphalte, le bois, en
terre compactée ou d'autres surfaces
dures. Tapis sur les sols durs ne peuvent
pas prévenir les blessures.
• Ce produit est conçu pour un usage résidentiel normal.
Convient à une utilisation intérieure ou extérieure.
• Ce produit est conçu pour des enfants de 3 à 5 ans.
• Poids maximal autorisé : 100 lb (45 kg) pour chaque jeu
individuel. Limitez 2 enfant à la fois.
ATTENTION
• RISQUE DE SUFFOCATION – Petites
pièces. Ce produit contient de petites
pièces et les pointes, qui sont
nécessaires pour le montage. Avant ou
pendant l'assemblage de ce produit,
conservez tous les composants hors de
portée des enfants. Petites pièces
présentent un risque d'étouffement pour
les enfants de moins de 3 ans.
• Le montage par un adulte est requis.
Phillips / tournevis cruciforme (non
compris) requis pour le monatage.
• NE PAS laisser les enfants jouer sur ce
produit avant qu'il soit complètement
installé.
• La surveillance d’un adulte est
obligatoire pour les enfants de tous âges
à tout moment dans le cadre de
l’utillsation de ce produit. Ne laissez ja,
ais les enfants sans survellance.
• NE PAS laisser les enfants à grimper ou
se mettre debout sur la table.

Pièces
10
Remarque: Illustrations pas à l'échelle.
G
D
I
J
J
HHI
C
E
A
F
B
ATTACHE GRANDEUR RÉELLE
N° DESCRIPTION QTÉ
A1
B1
C2
D1
E1
F1
G1
Mur D
Mur G
Panneaux de rangements
Siège les Panneaux
Bras D
Bras G
H4
I2
à l'arrière du Siège / la Table
Écrous
l'Embout
J2Pivot de blocage
LISTE DES COMPOSANTS
Écrous - M4 x 1.57 inch / 40 mm - 4