Fisher-Price Grow To Pro 3-in-1 Sports Trainer 77206 User manual

D
i
s
c
o
v
e
r
w
h
a
t
’
s
p
o
s
s
i
b
l
e
™
…
w
w
w
.
f
i
s
h
e
r
-
p
r
i
c
e
.
c
o
m
3-in-1 Sports Trainer
3-in-1 Sports Trainer
Model Number:77206
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Tool required for assembly and battery installation:
Phillips screwdriver (not included).
Requires four“D”(LR20) alkaline batteries (not included).

Parts
To prevent injury from balls and moving parts:
• Keep face, head and hands away from the ball release.
• Use only the balls included.
• Never put other objects in the ball chute.
WARNING
Ball Chute
Storage Cages
Trainer
2 Hockey Balls
2 Baseballs
2 Footballs
Hockey Stick
Baseball Bat
Part not shown:Label Sheet
#6 x 1/2" Screw – 4
Shown Actual Size
2

Battery Installation
Battery
Compartment
Door
• Locate the battery compartment door on the bottom of trainer.
• Loosen the screws in the battery compartment door with a Phillips
screwdriver.Remove the battery compartment door.
• Insert four,“D”(LR20) alkaline batteries,as indicated inside the
battery compartment.
• Replace the battery compartment door and tighten the screws with a
Phillips screwdriver.Do not over-tighten.
• When ball release distance is greatly reduced or if the time between ball
releases is much longer,it’s time for an adult to change the batteries!
Hint:Werecommendusingalkaline batteriesforlongerbatterylife.
Shown Actual Size
1.5V x 4
“D”(LR20)
3

Battery Tips
• Do not mix old and new batteries.
• Do not mix different types of batteries:alkaline,standard (carbon-zinc) or
rechargeable (nickel-cadmium).
• Remove the batteries during long periods of non-use.Always remove
exhausted batteries from the toy.Battery leakage and corrosion can
damage this toy.Dispose of batteries safely.
• Do not dispose of batteries in a fire.The batteries may explode or leak.
• Never short circuit the battery terminals.
• Non-rechargeable batteries are not to be recharged.
• Only batteries of the same or equivalent type as recommended in the
“Battery Installation”instructions are to be used.
• If removable rechargeable batteries are used,they are only to be charged
under adult supervision.
• Rechargeable batteries are to be removed from the toy before they
are charged.
• If you use a battery charger,it should be examined regularly for damage to
the cord,plug,enclosure and other parts.Do not use a damaged battery
charger until it has been properly repaired.
4

One-Time Assembly
1
Ball Chute
Storage Cage
Storage Cage
• Insert and “snap” the tabs on each storage cage into the slots in the
ball chute,as shown.
2
• Fit the chute assembly to the side of the trainer,as shown.
• Insert four screws through the chute assembly and into the trainer.
Tighten the screws with a Phillips screwdriver.Do not over-tighten.
Trainer Chute Assembly
5

Label Decoration
Proper label application will help keep labels looking their best! When
applying labels,keep the following guidelines in mind:
• Wash hands before applying labels.
• Before applying labels,wipe the surface of the toy with a clean,dry cloth
to remove dust or oils.
• For best results,avoid repositioning a label once it has been applied.
One-time assembly is now complete.
12
4
3
4
3
6
4
4

Three Sport Training for “Rookies” and “Pros”
Power/Speed Switch
• The trainer has a three position switch:
Off O,Low and High .Set to high
or low as directed on pages 8 through 10.
Loading the Trainer
Ball Chute
Storage
Cage
• Place balls in the ball chute as shown.
• Store additional balls in the storage cages
on either side of the ball chute.
7
Hint:Toremoveballsfrom
thestoragecages,pressupon
themthrough the openingin
thebottom of eachcage.
Storage
Cages

8
Baseball Training
• Load the baseballs into the ball chute.
Hint:Thehockeyballswillalso workforbaseball training.
• Set the power/speed switch to low speed for beginners,high speed
for more experienced athletes.
• Stand back at least 12 feet from the trainer.
Hint: Distancewillvary dependingonspeed settingandyourchild’scomfort.
• The trainer releases the baseballs about ten seconds apart.Try hitting it
with the baseball bat or catching it!

• Tilt the trainer forward to release hockey balls at ground level.
• Load the hockey balls into the ball chute.
Hint:Thebaseballswill also workfor hockeytraining.
• Set the power/speed switch to low speed for beginners,high speed
for more experienced athletes.
• Stand back at least 12 feet from the trainer.
Hint:Distancewill vary depending onspeedsetting andyourchild’s comfort.
• The trainer releases the hockey balls about ten seconds apart.Make the save
or receive the pass!
9
Hockey Training

• Load the footballs into the ball chute.
• Set the power/speed switch to low speed for beginners,high speed
for more experienced athletes.
• Stand back at least 12 feet from the trainer.
Hint: Distancewillvary dependingonspeed settingandyourchild’scomfort.
• The trainer releases the footballs about ten seconds apart.Catch the ball
and run for a touchdown!
10
Football Training

Important Notes
• Keep balls dry.If balls become wet,release distance will be reduced.
• Use only the balls that came with this toy.Do not use any other balls.
• If the trainer becomes jammed (motor is running and the balls aren’t
releasing),switch the trainer off and tip it upside down to dump out all
of the balls.Running the trainer when it is jammed may permanently
damage the toy.
Care
• Do not leave this toy outside when not in use.
•Wipe with a clean cloth dampened with a mild soap and water solution.
• Do not immerse this toy.
11

Consumer Information
Questions?We'd like to hear from you!
Call Fisher-Price® Consumer Relations,toll-free at 1-800-432-KIDS,
8 AM - 6 PM EST Monday through Friday.Hearing-impaired consumers
usingTTY/TDD equipment,please call 1-800-382-7470.
Or,write to:
Fisher-Price® Consumer Relations
636 Girard Avenue
East Aurora,NewYork 14052
Fisher-Price,Inc., a subsidiary of Mattel,Inc.,East Aurora,NY 14052 U.S.A.
©2002 Mattel,Inc.All Rights Reserved.® and ™ designate U.S.trademarks of Mattel,Inc.
Printed in Mexico 77206pr-0920
For other countries,outside the United States:
Canada: call 1-800-567-7724,or write to:Mattel Canada Inc.,6155 Freemont Blvd.,
Mississauga,Ontario L5R 3W2.
Great Britain: telephone [phone].
Australia: Mattel Australia Pty.Ltd.,658 Church Street,Locked Bag #870,
Richmond,Victoria 3121 Australia.Consumer Advisory Service 1300 135 312.
New Zealand: 16-18William Pickering Drive,Albany 1331,Auckland.