Fitnation ROCK N FIT User manual

USER GUIDE
◆ Before using this product, make sure you read the safety instructions thoroughly to ensure
proper use.
◆ Store instructions in a safe place so you can reference at any time.
◆ If you transfer the product to others, the user guide must be transferred together.
Catalog
Safety Instructions......................................................................................................................1~3
In The Box....................................................................................................................................4
Assembly..................................................................................................................................... 5~6
Getting Started............................................................................................................................ 7~9
How To Use.................................................................................................................................. 10
Storage & Maintenance...............................................................................................................11
Exploded View..............................................................................................................................12
Parts List.......................................................................................................................................13

● Please read safety instructions before using this product.
● This product follows regulations for UL 1647, C22.2 No. 68, Class HC (H= home use)
1
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical product, basic precautions should always be followed, including
the following:
Read all instructions before using this product.
DANGER – To reduce the risk of electric shock:
Always unplug this product from the electrical outlet immediately after using and before
cleaning.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
1) The product should never be left unattended when plugged in. Unplug from outlet
when not in use and before putting on or taking off parts.
2) Do not operate under blanket or pillow. Excessive heating can occur and cause fire,
electric shock, or injury to persons.
3) This product is not intended for use by persons with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the product by a person
responsible for their safety. Keep children under the age of 13 away from this
product.
4) Use this product only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
5) Never operate this product if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Return the
product to a service center for examination and repair.
6) Do not carry this product by supply cord or use cord as a handle.
7) Keep the cord away from heated surfaces.
8) Never drop or insert any object into any opening.
9) Do not use outdoors.
10) Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
11) To disconnect, turn all controls to the off position, then remove plug from outlet.
12) Do not mix old and new batteries.
13) Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni- Cd, Ni-Mh, etc) batteries.
WARNING – Connect this product to a properly grounded outlet only. See Grounding
Instructions.

This product must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. This product is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor
can result in a risk of electric shock. Check with a qualified electrician or
serviceman if you are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the product – if it will not fit
the outlet have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 120 V circuit and has a grounding
plug. Make sure that the product is connected to an outlet having the same
configuration as the plug. No adapter should be used with this product.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS:
People under below conditions are not recommended to use the product.
-People are under treatment, not in good condition, with malignant tumor, with
Osteoporosis, or with heart disease.
-People are pregnant or in menstrual period.
-People are with artificial limb, heart pacemaker, or other medical electronic
instrument implanted.
-People are sensitive to vibration and strenuous exercise.
Please do not use the product together with other medical equipments.
Please do not use the product for therapeutic purpose.
For your own safety, inspect the product for damage & wear regularly and before
each use, especially on the seat, screws, knob, exercise bands, and power cord. If
you find any missing or damaged parts, nicks, cuts, scratches or gouges in the
product, please discontinue use.
Warning: Incorrect posture can cause injury. To avoid injury, follow the safety
instructions in this user guide. If you are new to this product, we suggest you only
use it for a maximum of 30 minutes a day. Excessive training might cause muscle
pain. Do not use more than 10 minutes per usage.
Please stop immediately if you experience discomfort during exercise.
Do not use the product immediately after a meal or after drinking alcohol as accidents or
injury may occur.
Set up the product in a suitable location for exercise. If the location is inappropriate,
it may lead to falls or cause injury.
Please use the product on flat, hard surfaces. If the location is inappropriate, it may
result in falls or cause injury.
Appropriate and well-fitting sportswear must be worn during use. Failure to do so
may lead to injury or accident.
Make sure you complete a warm-up before exercise. Exercise without warming up
the body puts unnecessary stress on the body.
2

Child safety
Do not
disassemble
Confirmation
Forbidden
A
B
5.9 ft
5.9 ft
3.2 ft
3.2 ft
3.2 ft
3.2 ft
Please use the product on flat, hard surfaces. If the location is inappropriate, it
may result in falls or cause injury.
Appropriate and well-fitting sportswear must be worn during use. Failure to do so
may lead to injury or accident.
Make sure you complete a warm-up before exercise. Exercise without warming up
the body puts unnecessary stress on the body.
Please refer to instructions for usage tips to mount and operate the product prop-
erly as shown in the diagrams.
Always turn off the power switch and unplug the power cord after each use.
Warning: Max. exercise bands pull length are limited as 6 feet. Overstressing may
lead to injury or accident. Please attach the exercise bands to the product only. Do
not attach them to other unsuitable structures. Please do not expose or store the
exercise bands under direct sunlight. Failure to do so will damage the bands or
lead to accident.
When using the product, allow an area of 3.2 feet (Free area: A) around all sides
of the equipment (Training Area: B), so it is clear of all obstructions and posi-
tioned far enough away from children, bystanders and pets.
Never allow children to use this product unattended as this may lead to injuries.
Keep young children and pets clear while the product is in use.
Never repair or modify the product by yourself. This may lead to abnormal
movement or cause an accident. Contact the original dealer in case of a failure or
damage.
Before using the product, make sure the screws and knobs are secured properly.
Improper use may lead to accidents like toppling backwards or may cause damage.
Check if the voltage complies with the one specified for the product. Do not connect
multiple electric products and operate with same power outlet at same time.
Only use this product for its intended purpose. Improper use may result in a fall,
damage, equipment malfunction or injury.
Do not attempt any exercises that have not been listed in this user guide. Otherwise,
an injury or accident may occur.
Do not allow more than one person to use the product at the same time. This product is
designed for use by one individual at a time. Improper use may result in an accident or injury.
This product is limited to general home use. Improper use may cause an accidental injury.
It is forbidden to put fingers or other foreign bodies into the gap between the middle
cover and base cover of the product.
3

Please use the product on flat, hard surfaces. If the location is inappropriate, it
may result in falls or cause injury.
Appropriate and well-fitting sportswear must be worn during use. Failure to do so
may lead to injury or accident.
Make sure you complete a warm-up before exercise. Exercise without warming up
the body puts unnecessary stress on the body.
Please refer to instructions for usage tips to mount and operate the product prop-
erly as shown in the diagrams.
Always turn off the power switch and unplug the power cord after each use.
Warning: Max. exercise bands pull length are limited as 6 feet. Overstressing may
lead to injury or accident. Please attach the exercise bands to the product only. Do
not attach them to other unsuitable structures. Please do not expose or store the
exercise bands under direct sunlight. Failure to do so will damage the bands or
lead to accident.
In The Box
Exercise Seat Vibration Shaper
Exercise Bands Power Cord (w/plug)
Remote Control
(w/ AAA batteries x 2) Hex Wrench
Rock N Fit
4

Please use the product on flat, hard surfaces. If the location is inappropriate, it
may result in falls or cause injury.
Appropriate and well-fitting sportswear must be worn during use. Failure to do so
may lead to injury or accident.
Make sure you complete a warm-up before exercise. Exercise without warming up
the body puts unnecessary stress on the body.
Please refer to instructions for usage tips to mount and operate the product prop-
erly as shown in the diagrams.
Always turn off the power switch and unplug the power cord after each use.
Warning: Max. exercise bands pull length are limited as 6 feet. Overstressing may
lead to injury or accident. Please attach the exercise bands to the product only. Do
not attach them to other unsuitable structures. Please do not expose or store the
exercise bands under direct sunlight. Failure to do so will damage the bands or
lead to accident.
Hex screw x 4 Hex wrench
Seat base frameSeat top frame
Washer x 4
Required parts and tool
STEP 01 Assemble exercise seat
1. Lift up the side support of the seat base frame and
mount seat top frame on the seat base frame.
Exercise Seat Assembly
Tighten the hex screw on the middle
support of the seat base frame with
hex wrench.
2. Secure the seat base frame with hex screws and washers.
3. Tighten the hex screw with hex wrench.
STEP 02
Tighten the middle support
Assembly
Note: Hex screws and Washers are pre-secured
on the bottom of the Seat top frame.
5

Assembly
Attach exercise bands Accessory Assembly & Flatness Adjustment
Hold the end loop of the
exercise band and
thread it through the
hoop at the side of the
vibration shaper.
Unfold two hoops from
the side of the vibration
shaper.
Hold the end loop of the
exercise band and thread
the handle through the
loop to make a knot.
Pull the bands outward
to make the knot firmly.
Flatness Adjustment
Attach the exercise seat
If there is abnormal noise or shake, please check if the product is placed on the flat ground.
Place the product on the flat ground and check
if 4 rubber feet sit evenly on the ground.
Make flatness adjustment via rotating rubber
foot.
Mount the exercise seat on the vibration shaper. Tighten the knob to fix the exercise seat on
the vibration shaper steady and firmly.
6

Panel control function
ON/OFF
MODE SELECTION
SPEED ▲ / ▼ TIME +/-
START
Remote control function
Getting Started
STOP
TIME: 1-10 MINS
Workout time setting (Maximum: 10 MINS)
SPEED: LEVEL 1-20
Workout speed setting (Maximum: LEVEL 20)
ON/OFF:
To turn on or turn off the product.
WORKOUT TIME ADJUSTMENT:
Adjust workout time for 1-10 minute (for manual mode
operation only) before starting workout (It is not allowed to
adjust workout time during workout).
QUICK SPEED LEVEL SETUP
(*For manual mode operation only)
LEVEL 4 LEVEL 8 LEVEL 12 LEVEL 16 LEVEL 20
SPEED ADJUSTMENT:
Adjust speed level 1-20 (for manual mode operation only).
User could adjust the speed level after starting workout.
MODE SELECTION:
Select auto mode for program P1~P5 or manual mode.
START/STOP:
To start or stop the operation.
SPEED ▲ / ▼
QUICK
SPEED
LEVEL
SETUP
MODE SELECTION
ON/OFF
START/STOP
TIME +/-
7

Getting Started
Turn on the Main Power Switch
on the side of the product. Standby status to save power
Press ON/OFF button.
Turn on the Main
Power Switch.
Press ON/OFF button
to turn on the panel
control.
- The workout time would be setup for 10 minutes automatically.
- You could adjust workout time (1~10 minutes) before starting workout.
- You could adjust the speed level during workout.
Adjust required
workout time.
(1~10 minutes)
Press START button
to start workout.
Adjust required
speed level.
(Level 1~20)
Ready status for workout operation
Note: The workout time could not be adjusted during workout.
You could stop workout by pressing stop button any time.
Manual Mode Setup
Note : After unplugging the power cord or turning off the main
power switch, the panel will be light-off automatically.
8

Auto Mode Setup
Getting Started
Turn on the Main
Power Switch.
Press ON/OFF button to
turn on the panel control.
There are 5 programs (P1~P5) for Auto mode operation. Each program is with unique workout
time and speed level setting. Under auto mode, the user could not change workout time and
speed. The panel will display remaining workout time and current speed alternatively every 5
seconds. The machine will beep and stop, when the time is up.
Press MODE SELECTION
button to choose among
P1~P5.
Press START button
to start workout.
5
4
3
2
10.5 1 1.5 2 2.5 3
TIME（MINS）TIME（MINS）
TIME（MINS）
SPEED (LEVEL)
10
9
8
7
6
5
4
3
2
1
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
3 minute workout 5 minute workout 7 minute workout
10 minute workout 10 minute workout
P3
0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
0.5 11.5 22.5 109.598.587.576.565.554.543.53
P1
P4
P2
SPEED (LEVEL)
7
6
5
4
3
2
1
TIME（MINS）
0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
TIME（MINS）
SPEED (LEVEL)
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
P5
0.5 11.5 22.5 109.598.587.576.565.554.543.53
SPEED (LEVEL)
SPEED (LEVEL)
Auto Mode Program
9

How To Use
Mountain Squat
Beginner Setting: Speed Level 1-5
Intermediate Setting: Speed Level 6-15
Advanced Setting: Speed Level 16-20
Elevated BridgeHigh Plank
Side to Side Rock Standing Lateral Shoulder
Raise with Bands
10

Storage
Transportation
Maintenance/Inspection
Waste Disposal
Storage & Maintenance
Please remove the exercise seat from the vibration shaper before transportation.
Routinely check to make sure that the product is in good, working order. If the product gets
wet carelessly, please unplug and wait till it is completely dry, then check the operation
function by then.
In the event of failure or abnormal occurrences, please contact the dealer. If there is anything
about the product that you do not understand, please contact the customer service center.
Refer to local waste and recycling laws in your region.
Cleaning
- Always turn off the main power switch and unplug the power cord before cleaning.
- Clean with diluted neutral cleansing detergents, wipe dry with a dry cloth. Avoid using
alkaline cleaning agents or solvents as they may damage this product. Please always clean
the panel, power connection area, and remote control with dry cloth only.
- Always turn off the main power switch and unplug the power cord, when it is not in use.
Store out of reach of children.
- Store away from high temperatures, moisture and direct sunlight. Keep the product in a
clean place with good ventilation.
11

12
Exploded View
3
2
1
4
12
70
69
68
67
66
63
5453
73
56
55
57
60
59
71
61
72
58
62
52
51
5
6
6
6
7
13
50
27
77
78
80 79
74
8
8
9
44
29
32
33
36
48
40
47
45
46
49
31
35
37
38 39
42
43
41
34
30
28
19
20
21
10
75
16
11
14
76
25
24
22
81
15
18
17
26
65
64
23

Parts List
Description
Part# QTY
Anti-dust plug
Rubber mat
Panel label
Upper Cover
Middle Cover
Screw ST4*12
Main control board
Screw ST3*10
Magnet ring φ11.5*21.5
Jacket
PCB
Magnet ring 14*15*23
Magnet ring 34 34.5*21*12
Power switch
Power socket
Fuse
Electrical wire
Base cover
Exercise band Fixture
Hex screw set M6*10
Rubber Foot
Cable clamp 4R
Flange nut M8
Knob shaft fixture
Screw M5*10
Pivot pin
Flat washer φ8
Nylon nut M8
Vibration plate
Motor
Belt
Hex bolt set M8*14
Main frame
Insulation bushing
Bushing
Screw set M5*30
Pulley
Nylon nut M5
Main shaft
Sleeve
Bearing 6006
11
1
1
1
1
42
1
8
1
1
1
1
1
1
1
1
2
1
2
2
4
4
1
1
4
2
2
4
1
1
1
2
1
2
2
8
1
4
1
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
Description
Part# QTY
Fixture plate for sleeve
Screw set M5*25
Eccentric block
Brackt for main shaft
Flat washer φ5
Bearing 6201
Fixture plate for main shaft
Hex bolt M8*20
Outer bushing
Inner bushing
Bearing 6801
Sleeve lock pin
Spring washer φ8
Bearing sleeve
Seat cover
Foam
Foam support
Seat base
Screw ST4*12
Handle grip
Upper bracket
Screw ST5*16
Hex screw M6*20
Arc washer φ6
Side bracket
Hex screw M6*30
U-shaped fixture
Rubber foot for exercise seat
Flat washer φ6
Knob
Knob bolt
Knob spring
Tube plug
Nylon nut M6
Hex screw M6*12
Middle bracket
Screw M4*16
Remote control
Exercise bands
Power cord
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
2
4
1
2
4
2
2
2
1
1
2
1
4
2
1
1
1
1
4
2
1
4
4
4
2
2
2
4
5
1
1
1
2
3
2
1
4
1
2
1
13

Notes

Max. exercise bands pull length: 185 cm
Bands length and pull force:
48.9 N
Pull the bands to 72.8 in,
Tolerance:+/- 5 N
Model #
Dimension (LxWxH)
Weight
Material
Maximum User’s Weight
Rated Power and Voltage
Country of Origin
ROCK N FIT RNF-72
Vibration Shaper: 24.2x14.5x5.4 in Exercise Seat: 22.4x12.5x9 in
About 12.4 kg
Steel - PVC - ABS - TPE
150 kg
200 W, AC 120 V, 50 / 60 Hz, 1.8 A
China
Specifications:
ROCK N FIT RNF-72
082019