Flash butrym LED Magic Bar User manual

www.flash-butrym.pl
LED
User Manual
LED
MAGIC BAR
User Manual
Page 1

www.flash-butrym.pl Page 2
Please read this user manual before using this product.
Safety instruction
This device has left our premises in absolutely perfect condition. In order to
maintain this condition and to ensure a safe operation, it is absolutely
necessary for the user to follow the safety instructions and warning notes
written in this manual.
Please note: Every information is subject to change without prior notice.
Features
•Voltage: 120V 60Hz
•Light source: 144pcs 10mm RGB wash LED+128pcs 5mm RGB amber
LEDs
•Power consumption:40W
•operation modes: Automatic running, DMX, Sound Active, Master/slave
•3 DMX channels
•Digital display
•Red, Green & Blue LED Wash(white can be chosen),can be used as
Par Cans
•Red, Green, Blue, Amber LED moonflower effect
•In/Out IEC power connections to daisy-chain power
INTRUDCTION
•Thank you for choosing LED magic bar 310,you will see you have
acquired a powerful and versatile device.
CAUTION!
Be careful with your operations. With a dangerous voltage you can
suffer a dangerous electric shock when touching the wires！

www.flash-butrym.pl Page 3
DIP function(choose ID)
Display(first&
Second digit )
Display(third&
forth digit )
Function
ON (Master) 1（Fast）- 8（Slow
）
Auto Run
IC 1（Fast）- 8（Slow
）
Sound control(adjustable)
ID - 1 3CH DMX-512 control ID=1
ID - 2 3CH DMX-512 control ID=2
ID - 3 3CH DMX-512 control ID=3
ID - 4 3CH DMX-512 control ID=4
ID - 5 3CH DMX-512 control ID=5
ID - 6 3CH DMX-512 control ID=6
ID - 7 3CH DMX-512 control ID=7
ID - 8 3CH DMX-512 control ID=8
DIP(choose CH)
CH 0 Slave light
DMX Channels
Channel Scale Control
CH1 0--255 GOBO 1
CH2 0--255 GOBO 2
CH3 0--31 wash（no）
CH3 32--71 wash（Red）
CH3 72-106 wash（Green）
CH3 107--143 wash（Blue）
CH3 144--178 wash（Red,Green）
CH3 179--215 wash（Red,Blue）
CH3 216--250 wash（Green,Blue）
CH3 251--255 wash（RGB）

www.flash-butrym.pl Page 4
Memory function set
After setting up one mode, please press ENTER button in 1-2 seconds, after
see the display board twinkling one time, then can confirm you has set the
memory function.