flexicoil 67 User manual

67/67XL
Sprayer
SQ-044V1 1/05
Service Manual

578 (Replaces All Previous Issues) ©2005 CNH America LLC
If Safety Decals on this machine use the words Danger, Warning or Caution,
which are defined as follows:
zDANGER: Indicates an immediate hazardous situation that, if not avoided, will
result in death or serious injury. The color associated with Danger is RED.
zWARNING: Indicates a potentially hazardous situation that, if not avoided,
could result in death or serious injury. The color associated with Warning is
ORANGE.
zCAUTION: Indicates an potentially hazardous situation that, if not avoided,
may result in minor or moderate injury. It may also be used to alert against
unsafe practices. The color associated with Caution is YELLOW.
If Safety Decals on this machine are ISO two panel Pictorial, decals are defined
as follows:
zThe first panel indicates the nature of the hazard.
zThe second panel indicates the appropriate avoidance of the hazard.
zBackground color is YELLOW.
zProhibition symbols such as and if used, are RED.
SQ-044V1 Issued January, 2005
THIS SAFETY ALERT SYMBOL INDICATES IMPORTANT SAFETY
MESSAGES IN THIS MANUAL. WHEN YOU SEE THIS SYMBOL,
CAREFULLY READ THE MESSAGE THAT FOLLOWS AND BE
ALERT TO THE POSSIBILITY OF DEATH OR SERIOUS INJURY.
M171C
!
STOP
WARNING
!
IMPROPER OPERATION OF THIS MACHINE CAN CAUSE DEATH OR
SERIOUS INJURY. BEFORE USING THIS MACHINE, MAKE CERTAIN
THAT EVERY OPERATOR:
zIs instructed in safe and proper use of the machine.
zReads and understands the Manual(s) pertaining to the machine.
zReads and understands ALL Safety Decals on the machine.
zClears the area of other persons.
zLearns and practices safe use of machine controls in a safe, clear area
before operating this machine on a job site.
It is your responsibility to observe pertinent laws and regulations and
follow CNH America LLC instructions on machine operation and
maintenance.
Find manuals at https://best-manuals.com

Contents
INTRODUCTION
DISTRIBUTIONSYSTEMSA
POWERPRODUCTIONB
TRAVELLINGD
BODYANDSTRUCTUREE
FRAMEPOSITIONINGF
WORKINGARMH
FIELDPROCESSINGL
SQ-044V1212/10/2004
Find manuals at https://best-manuals.com

INTRODUCTION
SQ-044V1212/10/2004
1
Find manuals at https://best-manuals.com

Contents
INTRODUCTION
Legaladvice(-A.10.A.10)
67,67XL3
Foreword(-A.10.A.40)
67,67XL4
Safetyrules(-A.50.A.10)
67,67XL10
Decals(-A.50.A.30)
67,67XL16
Decals(-A.50.A.30)
67,67XL19
Torque(-A.90.A.10)
67,67XL22
Basicinstructions(-A.90.A.05)
67,67XL24
Basicinstructions(-A.90.A.05)
67,67XL25
Conversionfactors(-A.92.A.21)
67,67XL27
Abbreviation(-A.92.A.20)
67,67XL29
Generalspecication(-A.92.A.10)
67,67XL31
Dimension(-A.92.A.30)
67,67XL33
Dimension(-A.92.A.30)
67,67XL36
Weight(-A.92.A.40)
67,67XL39
Weight(-A.92.A.40)
67,67XL41
Productidentication(-A.80.A.10)
67,67XL42
Productidentication(-A.80.A.10)
67,67XL43
Productidentication(-A.80.A.10)
67,67XL44
Productidentication(-A.80.A.10)
67,67XL45
Productidentication(-A.80.A.10)
67,67XL46
Productidentication(-A.80.A.10)
67,67XL47
Partidentication(-A.80.A.20)
67,67XL48
SQ-044V1212/10/2004
2
Find manuals at https://best-manuals.com

INTRODUCTION
Legaladvice(-A.10.A.10)
67,67XL
Allrepairandmaintenanceworkslistedinthismanualmustbecarriedoutonlybyqualieddealershippersonnel,
strictlycomplyingwiththeinstructionsgiven;andusing,wheneverpossible,thespecialtools.
Anyonewhocarriesouttheaboveoperationswithoutcomplyingwiththeproceduresshallberesponsibleforthe
subsequentdamages.Themanufacturerandalltheorganizationsofitsdistributionchain,including-without
limitation-national,regional,orlocaldealers,rejectanyresponsibilityfordamagesduetotheanomalousbehavior
ofpartsand/orcomponentsnotapprovedbythemanufacturerhimself,includingthoseusefortheservicingorrepair
oftheproductmanufacturedormarketedbythemanufacturer.Inanycase,nowarrantyisgivenorattributedonthe
productmanufacturedormarketedbythemanufacturerincaseofdamagesduetoananomalousbehaviororparts
and/orcomponentsnotapprovedbythemanufacturer.
Theinformationinthismanualisup-to-dateatthedateofthepublication.Itisthepolicyofthemanufacturerfor
continuousimprovement.Someinformationcouldnotbeupdatedduetomodicationsofatechnicalorcommercial
type,aswellasthesuitthelawregulationsofdifferentcountries.
Incastofdisagreement,refertoyourSalesandServiceNetworks.
SQ-044V1212/10/2004
3
Find manuals at https://best-manuals.com

INTRODUCTION
Foreword(-A.10.A.40)
67,67XL
ASISTlinkedtoTechnicalInformation
ThismanualhasbeenproducedbyanewtechnicalinformationsystemwhichispartofASIST .Thisnewsystem
isdesignedtodelivertechnicalinformationelectronicallythroughASIST ,alsoonCDROMandinpapermanuals.
AcodingsystemcalledICEhasbeendevelopedtolinkthetechnicalinformationtoASISTandtootherProduct
Supportfunctionse.g.Warranty.
Technicalinformationiswrittentosupportthemaintenanceandserviceofthefunctionsorsystemsonacustomers
machine.Whenacustomerhasaconcernonhismachineitisusuallybecauseafunctionorsystemonhismachine
isnotworkingatall,isnotworkingefciently,orisnotrespondingcorrectlytohiscommands.Whenyourefertothe
technicalinformationinthismanualtoresolvethatcustomersconcern,youwillndalltheinformationclassied
usingthenewICEcoding,accordingtothefunctionsorsystemsonthatmachine.Onceyouhavelocatedthe
technicalinformationforthatfunctionorsystemthenyouwillndallthemechanical,electricalorhydraulicdevices,
components,assembliesandsub-assembliesforthatfunctionorsystem.Youwillalsondallthetypesofinformation
thathavebeenwrittenforthatfunctionorsystem,thetechnicaldata(specications),thefunctionaldata(howit
works),thediagnosticdata(faultcodesandtroubleshooting)andtheservicedata(remove,installadjust,etc.).
ByintegratingthisnewICEcodingintotechnicalinformationandASIST ,youwillbeabletosearchandretrievejust
therightpieceoftechnicalinformationyouneedtoresolvethatcustomersconcernonhismachine.Thisismade
possiblebyattaching3categoriestoeachpieceoftechnicalinformationduringtheauthoringprocess.
TherstcategoryistheLocation,thesecondcategoryistheInformationTypeandthethirdcategoryistheProduct:
•LOCATION-isthecomponentorfunctiononthemachine,thatthepieceoftechnicalinformationisgoingto
describee.g.Fueltank.
•INFORMATIONTYPE-isthepieceoftechnicalinformationthathasbeenwrittenforaparticularcomponentor
functiononthemachinee.g.CapacitywouldbeatypeofT echnicalDatathatwoulddescribetheamount
offuelheldbytheFueltank.
•PRODUCT-isthemodelthatthepieceoftechnicalinformationiswrittenfor.
Everypieceoftechnicalinformationwillhavethose3categoriesattachedtoit.Youwillbeabletouseany
combinationofthosecategoriestondtherightpieceoftechnicalinformationyouneedtoresolvethatcustomers
concernonhismachine.
Thatinformationcouldbe:
•thedescriptionofhowtoremovethecylinderhead
•atableofspecicationsforahydraulicpump
•afaultcode
•atroubleshootingtable
•aspecialtool
HowtoUsethisManual
ThismanualisdividedintoSections.EachSectionisthendividedintoChapters.Contentspagesareincludedat
thebeginningofthemanual,theninsideeverySectionandinsideeveryChapter.AnalphabeticalIndexisincluded
attheendofaChapter.Pagenumberreferencesareincludedforeverypieceoftechnicalinformationlistedin
theChapterContentsorChapterIndex.
EachChapterisdividedintofourInformationtypes:
•TechnicalData(specications)forallthemechanical,electricalorhydraulicdevices,componentsand,
assemblies.
•FunctionalData(howitworks)forallthemechanical,electricalorhydraulicdevices,componentsand
assemblies.
SQ-044V1212/10/2004
4
Find manuals at https://best-manuals.com

INTRODUCTION
•DiagnosticData(faultcodes,electricalandhydraulictroubleshooting)forallthemechanical,electricalor
hydraulicdevices,componentsandassemblies.
•Servicedata(removedisassembly,assemble,install)forallthemechanical,electricalorhydraulicdevices,
componentsandassemblies.
Sections
Sectionsaregroupedaccordingtothemainfunctionsorasystemsonthemachine.EachSectionisidentiedby
aletterA,B,Cetc.TheamountofSectionsincludedinthemanualwilldependonthetypeandfunctionofthe
machinethatthemanualiswrittenfor.EachSectionhasaContentspagelistedinalphabetic/numericorder.This
tableillustrateswhichSectionscouldbeincludedinamanualforaparticularproduct.
SECTION
A-DistributionSystems
B-PowerProduction
C-PowerTrain
D-Travelling
E-BodyandStructure
F-FramePositioning
G-ToolPositioning
H-WorkingArm
J-T oolsandCouplers
K-CropProcessing
L-FieldProcessing
PRODUCT
TractorsXXXXXXXX
Vehicleswithworkingarms:backhoes,
excavators,skidsteers,.....
XXXXXXXXX
Combines,forageharvesters,balers,....XXXXXXXX
Seeding,planting,oating,spraying
equipment,....
XXXXXXXXX
Mountedequipmentandtools,.....XXXX
SECTIONLETTERDESCRIPTION
DISTRIBUTION
SYSTEMS
AThisSectioncoversthemainsystemsthatinteractwithmostof
thefunctionsoftheproduct.Itincludesthecentralpartsofthe
hydraulic,electrical,electronic,pneumatic,lightingandgrease
lubricationsystems.Thecomponentsthatarededicatedtoa
specicfunctionarelistedintheChapterwhereallthetechnical
informationforthatfunctionisincluded.
POWER
PRODUCTION
BThisSectioncoversallthefunctionsrelatedtotheproduction
ofpowertomovethemachineandtodrivevariousdevices.
Inthecaseofapulled-typemachine,thisSectioncoversthe
powertake-offfunctionwherepowerisprovidedfromthetowing
machine.
POWERTRAINCThisSectioncoversallthefunctionsrelatedtothetransmission
ofpowerfromtheenginetotheaxlesandtointernalorexternal
devices.ThisSectionalsocoversthepowertake-offfunction
wherepowerisprovidedtothepull-typemachineandadditional
ProcessDrivefunctions.
TRAVELLINGDThisSectioncoversallthefunctionsrelatedtomovingthe
machine,includingtracks,wheels,steeringandbraking.Itcovers
alltheaxlesbothdrivenaxlesandnon-drivenaxles,includingany
axlesuspension.
BODYAND
STRUCTURE
EThisSectioncoversallthemainfunctionsandsystemsrelatedto
thestructureandthebodyofthemachine,includingtheframe,
theshields,theoperatorscabandtheplatform.Thefunctions
relatedtothepositioningofthemachineframeareincludedin
SectionF,FramePositioning.
SQ-044V1212/10/2004
5
Find manuals at https://best-manuals.com

INTRODUCTION
SECTIONLETTERDESCRIPTION
FRAMEPOSITIONINGFThisSectioncoversallthemainfunctionsandsystemsrelatedto
positioningofthemachineframeortopositioningtheattachment
onthesupportingmachineframe.
TOOLPOSITIONINGGThisSectioncoversallthefunctionsrelatedtothenaland /or
automaticpositioningofthetooloncethetoolispositionedusing
theWorkingArmorthemachineframe.
WORKINGARMHThisSectioncoversallthefunctionsrelatedtothearticulated
orsinglearmsmountedonthefrontorrearofthemachine.A
workingarmcanhavevarioustoolsandquickcouplersmounted
ontoit.ThetoolsandquickcouplersareincludedinSection
J,ToolsandCouplers.
TOOLSAND
COUPLERS
JThisSectioncoversallthefunctionsrelatedtothespecictools
thatmountonthefront,rearorbesidethemachine.Thetools
describedherecanbemountedwiththepositioningsystems
(lifting,sideshift,swing)listedinSectionGT oolPositioning.This
Sectioncoversallthequickcouplingsystems,locatedbetween
thetoolandthepositioningsystem.Thetoolsusedforeld
preparation,soilpreparationandtreatment,plantingandseeding
areincluded.
CROPPROCESSINGKThisSectioncoversallthefunctionsrelatedtocropprocessing.
FIELDPROCESSINGLThisSectioncoversalltheeldprocessingfunctionsofthe
machine.
Thismanualcontainsthesesections.
Contents
INTRODUCTION
DISTRIBUTIONSYSTEMSA
POWERPRODUCTIONB
TRAVELLINGD
BODYANDSTRUCTUREE
FRAMEPOSITIONINGF
WORKINGARMH
FIELDPROCESSINGL
YourmanualcontainstheseSections.ThecontentsofeachSectionareexplainedoverthefollowingpages.
SectionContents
SECTIONA,DISTRIBUTIONSYSTEMS
Contents
DISTRIBUTIONSYSTEMS-A
LIGHTINGSYSTEMA.40.A
67,67XL
ThisSectioncoversthemainsystemsthatinteractwithmostofthefunctionsoftheproduct.Itincludesthecentral
partsofthehydraulic,electrical,electronic,pneumatic,lightingandgreaselubricationsystems.Thecomponents
thatarededicatedtoaspecicfunctionarelistedintheChapterwhereallthetechnicalinformationforthatfunction
isincluded.
SECTIONB,POWERPRODUCTION
Contents
POWERPRODUCTION-B
PTOPOWERINB.90.A
67,67XL
Thissectioncoversallthefunctionsrelatedtotheproductionofpowertomovethemachineandtodrivevarious
devices.Inthecaseofapulled-typemachine,thisSectioncoversthepowertake-offfunctionwherepoweris
providedfromthetowingmachine
SQ-044V1212/10/2004
6
Find manuals at https://best-manuals.com

INTRODUCTION
SECTIOND,TRAVELLING
Contents
TRAVELLING-D
REARAXLED.12.A
67,67XL
WHEELSANDTRACKSWheelsD.50.C
67,67XL
ThisSectioncoversallthefunctionsrelatedtomovingthemachine,includingtracks,wheels,steeringandbraking.
Itcoversalltheaxlesbothdrivenaxlesandnon-drivenaxles,includinganyaxlesuspension.
SECTIONF,FRAMEPOSITIONING
Contents
FRAMEPOSITIONING-F
TRAVELLINGFoldingF.10.E
67,67XL
STABILISINGWorkingstabilisingF.20.
67,67XL
ThisSectioncoversallthemainfunctionsandsystemsrelatedtothepositioningofthemachineframeorto
positioningtheattachmentonthesupportingmachineframe.
SECTIONH,WORKINGARM
Contents
WORKINGARM-H
BOOMtiltH.20.C
67,67XL
BOOMUnfoldH.20.G
67,67XL
HITCHFrontHitchH.10.B
67,67XL
BOOMLevellingH.20.H
67,67XL
BOOMStabilisingH.20.J
67,67XL
ThisSectioncoversallthefunctionsrelatedtothearticulatedorsinglearmsmountedonthefrontorrearofthe
machine.Aworkingarmcanhavevarioustoolsandquickcouplersmountedontoit.
SECTIONL,FIELDPROCESSING
Contents
FIELDPROCESSING-L
SPRAYINGL.20A
67,67XL
SPRAYINGPressuresystemL.20.B
67,67XL
SPRAYINGPlumbingsystemL.20.C
67,67XL
SPRAYINGEndmarkerL.20.D
67,67XL
ThisSectioncoversalltheeldprocessingfunctionsofthemachine.
SQ-044V1212/10/2004
7
Find manuals at https://best-manuals.com

INTRODUCTION
Chapters
EachChapterisidentiedbyaletterandnumbercombinatione.g.SprayingL.20.A.Therstletterisidenticalto
theSectionletteri.e.ChapterL.10.aisinsideSectionL,FieldProcessing.TheChapterContentslistsallthe
"TechnicalData"(specications),"FunctionalData"(howitworks),"ServiceData"(remove,installadjust,etc..)
and"DiagnosticData"(faultcodesandtroubleshooting)thathavebeenwritteninthatChapterforthatfunctionor
systemonthemachine.
Contents
FIELDPROCESSING-L
SPRAYING-20.A
TECHNICALDATA
ElectronicControl-Calibration(L20.A-D30.A10)6
67FlexControl,67XLFlexControl
FUNCTIONALDATA
Command
Command-DetailedView(L.20.A.05-C.10.A.50)12
673SwitchController,67XL3SwitchController
SERVICE
Windscreen
Windscreen-Assemble(L.20.A.10-F .10.A.20)48
67WheeledBoom,67XLWheeledBoom
DIAGNOSTIC
SPRAYING-Incorrectalignment(L.20.A-G.20.C.32)64
67WheeledBoom,67XLWheeledBoom
TheChapterIndexlistsinalphabeticalorderallthetypesofinformation(calledInformationUnits)thathavebeen
writteninthatChapterforthatfunctionorsystemonthemachine.
Contents
FIELDPROCESSING-L
Command-DetailedView(L.20.A.05-C.10.A.50)12
673SwitchController,67XL3SwitchController
Command-DetailedView(L.20.A.05-C.10.A.50)18
676SwitchController,67XL6SwitchController
Command-ElectricalSchema(L.20.A.05-C.20.A.40)22
676SwitchController,67XL6SwitchController
Command-Explodedview(L.10.A.05-C.10.A.20)14
676SwitchController,67XL6SwitchController
InformationUnitsandInformationSearch
Eachchapteriscomposedofinformationunits.EachinformationunithastheICEcodeshowninparentheseswhich
indicatesthefunctionandthetypeofinformationwritteninthatinformationunit.Eachinformationunithasapage
referencewithinthatChapter.Theinformationunitsprovideaquickandeasywaytondjusttherightpieceof
technicalinformationyouarelookingfor.
exampleinformationunitStackvalve-SectionalView(A.10.A.18-C.10.A.30)
InformationUnitICEcodeA10.A18C10.A.30
ICEcodeclassicationDistribution
systems
Primary
hydraulic
power
StackvalveFunctional
data
Sectionalview
SQ-044V1212/10/2004
8

INTRODUCTION
CRIL03J033E011
Navigatetothecorrectinformationunityouaresearchingforbyidentifyingthefunctionandinformationtype
fromtheICEcode.
•(1)Functionand(2)Informationtype.
•(A)correspondstothesectionsoftherepairmanual.
(B)correspondstothechaptersoftherepairmanual.
(C)correspondstothetypeofinformationlistedinthechaptercontents,Technicaldata,FunctionalData,
DiagnosticorService.
(A)and(B)arealsoshowninthepagenumberingonthepagefooter.
THERESTOFTHECODINGISNOTLISTEDINALPHA-NUMERICORDERINTHISMANUAL.
•Youwillndatableofcontentsatthebeginningandendofeachsectionandchapter.
Youwillndanalphabeticalindexattheendofeachchapter.
•Byreferringto(A),(B)and(C)ofthecoding,youcanfollowthecontentsorindex(pagenumbers)andquickly
ndtheinformationyouarelookingfor.
PageHeaderandFooter
Thepageheaderwillcontainthefollowingreferences:
•SectionandChapterdescription
Thepagefooterwillcontainthefollowingreferences.
704039S2
PageFooterInformation
Printedreferencesfoundatthebaseofeachpagethenequateto
•ThepublicationnumberforthatManual,SectionorChapter.(SQ-044V1)
•Revisionnumberofthepublication(1)
•Publicationdate(10/09/2004)
•Chapterreference(n/a)
•Pagereference(6)
SQ-044V1212/10/2004
9

INTRODUCTION
Safetyrules(-A.50.A.10)
67,67XL
0960012c1
Thesafety-alertsymbolisusedtodenotepossibledangerandcareshouldbetakentopreventbodilyinjury.This
symbolmeansATTENTION!BECOMEALERT!YOURSAFETYISINVOLVED!Thissymbolappearswithtext
reading"Danger!","Caution!",or"Warning!".Thesewordsindicatethreelevelsofpossiblehazards,whichare
describedbelow.
DANGER!-Indicatesanimmediatehazardoussituationwhichifnotavoided,willresultindeathorseriousinjury.
ThecolorassociatedwithDangerisRED.
WARNING!-Indicatesapotentiallyhazardoussituationthatifnotavoided,couldresultindeathorseriousinjury.
ThecolorassociatedwithWarningisORANGE.
CAUTION!-Indicatesapotentiallyhazardoussituationwhichifnotavoided,mayresultinminorormoderateinjury.
Itmayalsobeusedtoalertagainstunsafepractices.ThecolorassociatedwithCautionisYELLOW.
ACAREFULOPERATORISTHEBESTINSURANCEAGAINSTANACCIDENT .
CAUTION
M870-Userubbergloves,protectiveeyewearandprotectiveclothingwhencleaningorworkingwith
componentscoveredwithactivechemical.
CAUTION
M871-Shutdownthemachine,removekey,besureallmovingpartshavestoppedandallpressureinthe
systemsisrelievedbeforecleaning,adjustingorlubricatingtheequipment.
CAUTION
M880-Alwaysbecertainthatallpressureinthehydrauliccircuitsisrelievedbeforeservicingor
disconnectingthehydraulics.
GENERALSAFETYPRACTICES
•REVIEWthismanualbeforeeachseasonofuse.
•NEVERallowanyoneunfamiliar,untrained,orcomplacenttooperatetheimplement.
•USEEXTREMECAREwhencleaning,lling,oradjustingtheimplement.
•MAINTAINYOURIMPLEMENTinproperworkingcondition.Unauthorizedmodicationstothemachinemay
impairfunctionand/orsafetyandaffectmachinelife.
•KEEPCHILDRENAWAYfromchemicalsandequipment.
•PARKONLEVELGROUNDandblockadequately.
•AVOIDmovingmachines.
SQ-044V1212/10/2004
10

INTRODUCTION
098001M12
•DISENGAGEPOWERANDSHUTDOWNthetractorengine(removethekeyfromthetractorignition)and
becertainthatallmovingpartshavestopped,andallpressureinthesystemisrelievedbeforecleaning,
adjusting,orlubricatingtheequipment.
192169C3
•KNOWtheoperator’smanualwell.
•KEEPserviceareaclean.
098002M14
•DONOTentertankunlessanotherpersonispresent.
196149S5
SQ-044V1212/10/2004
11

INTRODUCTION
•DONOTentertightareas.
•BECERTAINmachineistagged’OutofOrder’orworkareaissupervised.
•DONOTworkaroundrotatingequipment.Looseclothing,rings,watches,etc.maygetcaughtandcause
seriousinjury.
097001M16
•BECERTAINallmovingpartshavestoppedbeforeservicing.
098004M17
•AVOIDtoxicvapors.Breathecleanair.
0960039m18
•DONOTpermitsmoking.
196150M19
SQ-044V1212/10/2004
12

INTRODUCTION
•WEARprotectiveclothing.
192078M110
•AIRANDAIRHOSES
COMPRESSORHOSESmaymoveunexpectedlywhensuddenlydisconnected.
098005M111
•USEPROPERairnozzles.Neverusecompressedairtocleanoffclothesorotherwisedirectittowardyourself.
098006M112
•AVOIDgettingchemicalsintoeyes.Useeyeprotection.
098007M113
•HYDRAULICSANDHYDRAULICLEAKS
AVOIDhigh-pressureuids.
•ESCAPINGHYDRAULICFLUIDISASERIOUSHAZARD.Escapinghydraulicuidthatisunderpressure
canpenetratetheskincausingseriousinjury.Relievepressurebeforedisconnectingthehydrauliclines.
Check/tightenallconnectionsBEFOREapplyingpressure.
SQ-044V1212/10/2004
13

INTRODUCTION
000002C14
•BEWAREexcessivehydraulicpressure.Explosivestructuralfailurecanresult.
•BEWAREairlocksincylinders.Largecylinderdisplacementscanoccurwithouthydraulicoilow.
•SHIELDS
REPAIRanydamagedshields.
•KEEPallshieldsinplace.
•BEEXTRACAUTIOUSwhenrepairingorservicingwithoutprotectiveshields.
098008M115
•ELECTRICAL
REMOVEthegroundwiretoavoidarcingcontacts.
•REMOVEthegroundwirewhenwelding.
098009M116
•TIRES
USEACAGEifpossiblewhensettingtiresonrims.
•AVOIDexcessiveairpressure.
•DONOTOVER-INFLATEtires.NEVERleanoveratirewhileinatingit.
SQ-044V1212/10/2004
14

INTRODUCTION
960041M117
WARNING
M169B-Donotremove,installormakerepairstoatireonarim.Takethetireandrimtoatireshopwhere
personswithspecialtrainingandspecialsafetytoolsareavailable.Ifthetireisnotincorrectpositionon
therim,oriftoofullofair,thetirebeadcanloosenononesideandcauseairtoleakathighspeedand
withlargeforce.Becausetheairleakcanthrustthetireinanydirection,andwithmuchforce,youwill
beindangerofinjury.
SQ-044V1212/10/2004
15

INTRODUCTION
Decals(-A.50.A.30)
67,67XL
704010C1
SafetyDecalLocations-WheeledBoomSprayer
RefertoDecalDescriptions
1.Danger-RotatingSprayBoomHazard
SQ780252
2.Danger-Falling&RaisingDiscStandClear
SP920283
SQ-044V1212/10/2004
16

INTRODUCTION
3.Caution-EngageTransportLocks
SQ780274
4.Danger-HydraulicFoldoutHazard
SQ780265
5.Caution-OperationandService
GD500726
6.Caution-KeepTankLidClosed
SQ780287
7.Warning-AvoidChemicalExposure
SQ-044V1212/10/2004
17