Flexsteel home Power Recliner with Power Headrest and... User manual

IMPORTANT NOTE
Power Recliner with Power Headrest and Lumbar
A. Back Cushion
B. Seat Cushion
1 piece
1 piece
Part List
Take all the fittings out of the plastic bag and separate them into
groups. Ensure you have enough space to lay out all the parts
before assembly. To prevent damage to the parts, we recommend
that you assemble the unit on a soft, level surface.
Assembly Instructions
STEP 1
Detach the transformer from the back of the Seat (B). (See Figure 1.)
A
B
Figure 1
Read these instructions carefully, and familiarize yourself with
each procedure before assembling the furniture. Check that you
have all the component parts, and familiarize yourself with each
part before proceeding.

Assembly Instructions
STEP 3
Flip up the back flaps, and remove the headrest and lumbar cables from the Backs (A). Plug the
Lumbar and Headrest connecters (if applicable). (See the Figure 3.)
Headrest
Lumbar
Headrest
Lumbar
STEP 2
Attach the Back (A) to the Seat (B). Ensure the latches fit well. (See Figure 2.)
Fasten the back flap to the bottom of the furniture. (See Figure 4.)
STEP 4
Plug the transformer into a nearby outlet, still making sure it is clear of the metal base.
STEP 5
IMPORTANT NOTE
· To avoid any risk of suffocation to children or pets, dispose of all plastic bags immediately.
· To ensure proper performance, occasionally check for loose screws and tighten as needed.
· If the reclining functions are not working properly, check for loose cable connections before
contacting the retailer.
Figure 2
Figure 3
Figure 4
A
B