Noble House Home Furnishings Push Back Chair User manual

Caution:You must read this before you proceed
Push Back Chair
Label Picture Description QTY
A Chair Backrest 1
BChair Base 1
C
Front Leg (with
Acrylic
Gasket)
2
D
Hind Leg (with
SiliconeGasket
and Acrylic
Gasket)
2
Noble House Home Furnishings LLC Page 1 OF 9

Label Picture Description QTY
①Gasket 3
Befor
Beginin
g
Assembl
y:
Overview
Chair Backrest(A)
Chair Base(B)
Hind Leg(D)
Front Leg(C)
Front Leg(C)
FRONT FACING
Noble House Home Furnishings LLC Page 2 OF 9

Overview
This Push Back Chair has multiple parts and may require up to
some 30 minutes to assemble. To give you an overview of the
Chair parts, the above picture is to help you put the various parts
into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly
Step 1
Take out the Chair Backrest(A) from Chair Base with Footrest(B).
Step 2
Turn the Chair Base with Footrest(B) upside down on a clean, non-
marring surface.
Open the non-woven bag and take out the Legs and Gaskets.
FRONT FACING
C
D
①
Noble House Home Furnishings LLC Page 3 OF 9

Step 3
Install the Front Leg(C) at the bottom of the Chair by placing one
Gasket① on
the threaded stem.
Then insert threaded stem into the mounting postion at the corner
of the Chair.
Tighten by turning the Leg clockwise, Do not over tighten.
Repeat the same process to install the remaining three Legs.
Take care of the shape of the Legs and ensure they are in the
correct postions.
Note: The use of Gaskets are OPTIONAL and are especially useful
to
help alleviate slight wobbleness. Some Legs may need more than
one gasket whilst some legs may not need any.
Noble House Home Furnishings LLC Page 4 OF 9

Step 4
With assistance from your adult partner, hold up the fully
assembled backrest
, stand behind the chair.
Insert the small metal arms on the sides of the Chair Backrest into
the prefabricated slide lock gadget on the Chair Base as shown
above.
Firmly but gently, push the Chair Backrest downwards until the
Backrest is fully slotted and locked into position.
Step 5
Smooth down the fabric flap on the Chair Backrest(A).
Run your hands down both sides of the flap,from top to
bottom,allowing the velcro tape to adhere to the flap under the seat
of the chair.
C
D
①
①
A
B
the metal
on Chair
Backrest(A)
th metal on
Chair
Base(B)
A
B
B
Noble House Home Furnishings LLC Page 5 OF 9

Step 6
Make sure all parts are connected and securely locked into
position. Your Chair is ready for use.
Step 7
Velcro
A
F
A
metal on
Right
Wing(F)
metal on
ChairBack
rest(A)
Noble House Home Furnishings LLC Page 6 OF 9

Disassembly Note:Open the flap on the Chair Backrest(A),use a
screwdriver(Don't use fingers) pressing outward on the metal ear
on the preattached Metal Bracket on one side of the Chair Base
with Footrest(B),with assistance of you adult partner to keep the
Chair Base with Footrest(B) in place, pull out the Chair Backrest(A)
upward at the same time,repeat the same step for another
side.Then the Chair Backrest(A) can be taken out.
Step 8
Make sure all parts are connected and securely locked into
position.
Your Chair is ready to use.
This Chair can only be used on a flat, level surface.
User Instructions.
Push Back Chair
Please read the Instruction Manual below carefully before use.
Supervise children,when in use of this Push Back Chair.
Warning
Noble House Home Furnishings LLC Page 7 OF 9

Do not allow children to play on the chair.
Always leave the chair in an upright and closed position after use!
Keep hands and feet clear of the footrest mechanism and ANY gaps.
Only the occupant should operate the chair.
Noble House Home Furnishings LLC Page 8 OF 9

Noble House Home Furnishings LLC Page 9 OF 9