Homelegance 4866-DG User manual

Thank you for purchasing this product. Please take time to read and follow the instructions below. Check that you have all parts and hardware
before assembly. Parts apparently missing are often found in the packing materials. If you do not have all the parts listed,have your dealer contact
us and they will be sent to you immediately.
It is recommended to install protective pads under all legs and supports to avoid damage or scratches when placing furniture on a wood
H O M E L E G A N C E
TOP
s
BOTTOM
DAYBED PARTS LIST TRUNDLE PARTS LIST
Daybed Back Panel
LSF Side Panel
RSF Side Panel
Trundle Front Panel
Trundle Side Panel
Trundle Back Panel
Daybed Slats
4866DG-A : Daybed (1/2) Side Arms & Trundle Side Panels & Slats
4866DG-B : Daybed (2/2) Back, Trundle, Rails
4866-DG Daybed with Trundle
*DO NOT TIGHTEN BOLTS UNTIL COMPLETELY ASSEMBLED.
*HARDWARE ARE PACKED IN 4866DG-A.
BUN FOOT AND HARDWARE SET ARE STORE IN 4866DG-A*
8 pcs
4 pcs
12 pcs
26 pcs
4 pcs
20 pcs
12 pcs
20 pcs
16 pcs
4 pcs
4 pcs
1 pc
K
L
2 pcs
H
M
DAYBED TRUNDLE
Allen Key M4 x 100mm
Wood Dowel M10 x 30mm
Bun Foot
Castor
JCBC Bolt M6 x 1.0 x 30mm
JCBC Bolt M6 x 1.0 x 50mm
Flat Washer M6 x 6/8” x 2/8” x 0.08”
CSK Screw M4 x 1.80 x 25mm
CSK Screw M4 x 1.80 x 38mm
JCBC Bolt M6 x 1.0 x 30mm
Flat Washer M6 x 6/8” x 2/8” x 0.04”
CSK Screw M4 x 1.80 x 25mm
CSK Screw M4 x 1.80 x 16mm

1
F
Pg 2 of 4
C
A
G
x8
2
3
4
2 / 3
E
x4
DO NOT TIGHTEN BOLTS UNTIL COMPLETELY ASSEMBLED
STEP 1
STEP 2
STEP 3
Remove the non woven behind the Back Panel
DAYBED

Pg 3 of 4
5
D
x26
C
B
G
x4
Hx2
FULLY TIGHTEN ALL JCBC BOLTS
STEP 4
STEP 5
Daybed
Top
7
L
M
x4
Please follow the marking
STEP 6
TRUNDLE

Pg 4 of 4
STEP 7
ASSEMBLY COMPLETED
Trundle
Daybed
9
K
J
I
G
9
x20
x12
STEP 8
Trundle
BOTTOM
7
8
6
7
I
G
x8