Flyron Technology SmartSound FNP-702A User manual

Flyron Technology Co., Ltd. www.flyrontech.com
1
SmartSound PIR Motion Sensor Activated Audio Player
Model No.: FNP-702A V2.0
User’s Manual
1. Product features
Adjustable volume level from 1 - 8 by press button B
Select sound file by press Button A
Select single play mode/all circle play mode by hold Button B
Build with indicator light
Support to connect a external speaker
Change sound file via Micro USB cable
Memory: 4MB
Easy installation
Build with infrared sensor
Speaker：8Ω2W
Max volume: 100 dB
2. Electrical parameters
Power supply
Micro USB 5V/1A
3.7V 500mAH Lithium Battery
Working current
Stand by
mode
≤40uA
Playing
mode
≤260mA
Charging current
≤950mA
Format
MP3
Rate ：16~320Kbps
Speaker
8Ω/2W
Sensor Range
0-6 meter
Volume level
≥100dB
Working time
Support to play a 10 second sound file 50time
per day ,then it can play 12 days

Flyron Technology Co., Ltd. www.flyrontech.com
2
3. Panel and operating guidance
3-1：Panel
3-2：Button Function
Button Name
Operation
Function
ON/OFF Button
Pull up
Turn on
Button A
Press
Next
Hold for 3 seconds
Select single play mode
Button B
Press
Adjust volume from 1 - 8
Hold for 3 seconds
Select All Circle play mode
3-3：Indicator light instruction
Color
Working Mode
Status
Red
Playing
On
Low electricity
Flashes 5 times
Charging
Flash slowly
Connect with computer
Flash slowly
Green
Full charge
Flash slowly
Green +red
Turning on
Both color flash slowly
3-4：Change sound file
1Connect with computer by Micro USB cable,find the disk
2Put sound file in the disk
3Disconnect with computer , then press A button to listen
3-5：AUX port
Use AUX cable to connect with speaker and WT-S11 to enlarge volume

Flyron Technology Co., Ltd. www.flyrontech.com
3
Hole for stand
4. Installation and fast guidance
4-1：Stand install
4-2：Installation sketch
1Install in door
2Install on the side
Stand

Flyron Technology Co., Ltd. www.flyrontech.com
4
5.Cautions
Environment temperature too high(≥35℃) will affect the induction distance and sensitivity.
Air conditioner or electric fan right to the sensor, that will affect the induction distance and sensitivity.
6.FAQ
1: why can`t I hear any sound after turn on the device
Answer: (1)please check if the volume level is “mute”
（2）please check if the format of sound file is MP3, and the capacity is less than standard capacity.
2: How to supply power to Smart sound V2.08?
Answer:there are two different way: one is using 5V USB adapter ,other one is inside battery
3: Why can`t I find the disk when connect with computer via USA cable?
Answer：(1)Normally it will takes 5 seconds to found the disk
(2)please check if the USB cable is working
4:When playing ,why the sound is not clear ?
(1)please check if the rate of sound file is too high , the good rate is 128kpbs.
(2)Please check if the battery is enough, if not ,please charge .