Focal INTEGRATION PLUG&PLAY IFBMW-S User manual

INTEGRATION
PLUG&PLAY IFBMW-S
User manual / Manuel d’utilisation
English page 2
Français page 9

Thank you for choosing Focal and for sharing our passion for the “Spirit of Sound”. Designed using the latest
technology, these speakers integrate Focal’s perfectionist believes, developing products with high power
handling, and unrivalled sound quality. To obtain the best results from this product, we recommend that you
follow carefully all the information contained in this user’s manual. If not correctly followed, any fault observed
may not be covered by the guarantee.
Warning
Continuous listening at high sound level (above 110dB) can durably damage your hearing.
Listening above 130dB can damage your hearing permanently.
The Focal guarantee only applies if the enclosed guarantee card
is returned to us within 10 days of purchase.
Important recommendations
Before attempting any installation work, it is very important to check how much space is available
to fit the speakers into the vehicle.
Key points:
• Ensure the speaker is clean from debris and metallic particles that maybe attached (especially after drilling).
• Clean before mounting the speakers.
Conditions of guarantee
All Focal loudspeakers are covered by guarantee drawn up by the official Focal distributor in your country. Your
distributor can provide all details concerning the conditions of guarantee. Guarantee cover extends at least to that
granted by the legal guarantee in force in the country where the original purchase invoice was issued.
English
IFBMWS PLUG&PLAY INTEGRATION
User manual
Due to constant technological advances, Focal reserves its right to modify specifications without notice. Images may not conform exactly to specific product..

3
2 way kit IFBMW-S installation
Installation 100% dedicated to BMW®(serie 1/3/x1) in less than an hour (BMW®is a trademark of
BMW®). Watch the demonstration video: http://mobi.focal.com/ifbmw-s/en/
- This kit has been designed for installation in a BMW®(serie 1/3/x1)
- The components of this dedicated kit are compatible with this vehicle’s original connectors and fixings.
- Take extreme care when installing.
- Only the use of appropriate quality tools can guarantee optimal installation.
- Connectors are fragile electronic components. Handle with care.
- Follow these instructions correctly to ensure the proper functioning of the IFBMW-S kit.
- Before restarting your system, check your car radio settings (which differ according to the vehicle’s model,
version and engine).
IFBMWS PLUG&PLAY INTEGRATION
User manual

4
1. Dismantling the door panel with the focal and torx tool (supplied with the kit).
IFBMWS PLUG&PLAY INTEGRATION
User manual

5
2. Dismantle the door control and the speaker connector.
3. Speaker disassembly : used a 8 mm key (not supplied with the speaker kit).
4. Focal wire plug on the driver and cable fixing inside the door panel (to reduce all parasite noises).
IFBMWS PLUG&PLAY INTEGRATION
User manual

6
5. Tweeter assembly in factory space (takes off the grille and be careful to the tweeter cone).
IFBMWS PLUG&PLAY INTEGRATION
User manual
WARNING: use the coded pin location.
Coded pin

7
6. Connect the tweeter wire directly to the focal connector plugged on the midrange driver.
7. Door panel assembly.
IFBMWS PLUG&PLAY INTEGRATION
User manual

8
Ø12 mm
2 x
Ø4 mm
HPPT1145 - Left HPPT1146 - Right
Tweeter oriented part die cut (see page 16).
You can used the IFBMW-S in a “non equipped” 2 way component BMW® car.
You have 2 possibilities :
1. Order to your BMW® car seller, the original spare part dedicated for your car (in case of a hifi system) (different
parts either with a plastic part behind the mirror, either a full door trim).
2. Use our tweeter part supplied in the IFBMW-S kit (in this case, please read carefully the instruction below)
∙ Cut the templates (scale 1 :1) enclosed to this service manual (respect the right side).
∙ Adjust the templates on the Factory plastic parts.
∙ Adjust the focal tweeter support (supplied in the IFBMW-S kit) (REF HPPT1145 left side or HPPT1146 right side)
to find the best staging and aesthetic in your car.
∙ Drill holes for the 2 screws and the focal wire (diameter = 4mm for the 2 screw and 12 mm for the wire hole).
∙ Screw the 2 vis (from the interior of the original plastic part).
∙ Mount the tweeter and lock it thanks to the grey ring with the FOCAL logotyp (which might be in down position).
IFBMWS PLUG&PLAY INTEGRATION
User manual
Your Focal-JMlab product was developed and manufactured with high-quality materials and components
which can be recycled and/or re-used. This symbol indicates that electrical and electronic equipment
must be disposed of separately from normal garbage at the end of its operational lifetime.Please dispose
of this product by bringing it to your local collection point or recycling centre for such equipment. This will
help to protect the environment in which we all live.