FoodVille MF02 User manual

FoodVille MF02
Electric Milk Frother
3-Year Warranty
Thank you for purchasing the electric milk frother. Your
product comes with a 3-year warranty, including a free
replacement policy and a money-back guarantee, to
make you shop with confidence.
If you require any addional informaon or have any
further problems, please do not hesitate to contact
official customer service:
We will get back to you as soon as possible and help you
resolve your issues.
[email protected]

Box Contents
1
Balloon Egg
Whisk Head
Milk
Frother Head
USB Cable
Connection Hole
Wand Handle
Charging
Indicator Light
Speed
Indicator Light
On/Off Switch
Charging Port

How to Install the Head?
1. Select the right whisk head and insert it into the connecon
hole properly.
2. Always aach the hole of the spring top to the connecng
rod inside the casing.
2
How to Remove the Head?
1. Firmly hold the head of the whisk and the boom of the
wand handle.
2. Pull out with your both hands together.
3. To avoid bending, do not hold the sha to pull the whisk
from the handle.
4. To remove the head from wand handle easily, please do
not over insert it.

3
How to Resolve Speed Issues When Turning Off?
1. You need to adjust the speed before turning o ffthe device.
2. Thus, press the on/o ffswitch as fast as you can, and make
sure fill 1/2 of a jug with milk at most before frothing it.
Otherwise, the milk will spill out.
Note:
The wobbling issues are caused by heavy duty whisk head.
If you need any further informa?on/help,
please feel free to contact us.
Official Email: [email protected]
How to Eliminate Wobbling Issues?
1. Do not bend the sha? when connec?ng to the whisk head.
2. Always insert the head into the milk ver?cally or into the
egg whites.
3. Test the device before opera?ng it.
Switch Off Firmly Hold
Face Down
Switch On
No More Wobbles

4
How to Froth Milk Perfectly?
1. Fill 1/3 or at most 1/2 of a jug with milk and heat to 60°C.
For milkshakes, make sure the milk is cold enough.
2. Insert the p of the whisk into the milk close to the jug’s
boom. Switch on the wand.
3. Press the on/off switch to change the speed.
4. Slowly swirl the wand in a circular moon for 30 seconds.
Keep the p of the whisk beneath the surface of the milk
unl the foam lasts over 30 seconds.
5. Turn off the wand and remove it from your milk.
How to Charge Your Frothing Wand?
1. Always charge the wand via the micro USB charging port.
2. For fast charging, connect the wand to a compable charger
(DC 4.5-5.5V, current is less than 0.5A) using a micro USB
to USB cable.
3. The red indicator light means the wand is charging, and
the green light means the wand is fully charged. It will take
6 hours to fully charge.
4. For your safety, the product provides overcharge, over
discharge and overload protecon.
Cleaning Tips
1. Do not immerse the wand handle in water, or clean it with
water.
2. Do not put the wand handle in the dishwasher.
3. Always clean the frothing wand before first use.

5
4. Remove the whisk and sha from the handle before
cleaning the wand.
5. Clean the head in hot soapy water and rinse it with running
water.
6. Wipe the frother with a dry cloth aer cleaning it. Turn it
upside down, and place it on a solid surface to prevent
water from entering the wand handle.
Technical Specications
Baery Type: 1200mAh Rechargeable 18650 Lithium-ion
Baery
Charging Voltage: DC 4.5-5.5V
Charging Current: Maximum Supported 0.5A
Charging Time: 6 Hours
Operang Time: 1 Hour (High Speed), 1.5 Hours
(Medium or Low Speed)
Package Dimensions: 4.2” x 1.8” x 9.1”
Package Weight: 7.5oz
Color: Black
Helpful Tips
1. Excessive operang me (more than 5 minutes) will affect
the performance of the motor and the built-in baery.
2. Operang temperature should be no more than 60°C.
Otherwise, it will shorten the wand life.
3. Keep out of reach of children.