for Living 168-0084-2 User manual

Office Chair
Product No. 168-0084-2
Assembly Instructions
Having trouble?
Toll free: 1 877 483 6759

3
Important Safety Instructions
Parts List/Exploded View
Step-by-Step Instructions
Table of Contents
downsizing your family home,
For Living is a great place to start.
Uncomplicate your life with timeless
style and reliable quality that delivers
everyday solutions for your home.
Let us know how our products
work for you. Rate and review at
canadiantire.ca
Not intended to seat more than one person.
Do not stand on this chair or use as a stepladder.
NEVER exceed the weight limit. The maximum weight load for this product
is 225 lb (102 kg).
7
3
4
15
15

4 5
ytitnauQnoitpircseDmetI
View dedolpxEtsiL straP
Castor Wheels
Base
Gas Lift
Telescopic Cover
Seat Plate
Seat Cushion
Back Cushion
Armrest (Left & Right)
1234
Screws
Caps

6 7
noitaraperP ylbmessA Step-by-Step Instructions
Step 1
Requires 1 , 2
Place the BASE (2) upside down on the ground.
Insert the five CASTORS WHEELS (1) into the base.
NOTE: Please make sure all CASTORS are firmly inserted in.
1X5
1 2
2X1
X5 X1

8 9
Step 2
Requires 3 , 4
Turn the BASE (2) right side up and insert GAS LIFT (3) and
TELESCOPIC COVER (4).
3 4
3X1
4X1
X1 X1
2
Step-by-Step Instructions
Step 3
Requires 5 , 6 , A , C
Attach SEAT PLATE (5) onto the SEAT CUSHION (6) with SCREWS (A)
and tighten 80% with ALLEN KEY (C). DO NOT fully tighten.
NOTE: Please ensure all screws are fitted tightly.
5X1
6X1
AX4
CX1
5A C
X4 X1 X1

10 11
Step-by-Step Instructions
Step 4
Requires 3 , 5
Carefully attach the SEAT PLATE (5) onto the GAS LIFT (3).
5
3
Step 5
8
Requires 6 , 8 , A , C
Attach LEFT & RIGHT ARMRESTS (8) to each side of the SEAT CUSION (6)
with SCREWS (A) and tighten 80% with ALLEN KEY (C). DO NOT fully tighten.
A C
6
X4 X1
AX2CX1

12 13
Step-by-Step Instructions
Step 6
Requires 7 , 8 , A , C
Attach the BACK CUSHION (7) to the LEFT & RIGHT ARMRESTS (8)
with SCREWS (A) and ALLEN KEY ©. DO NOT fully tighten.
8
AX1CX1
7
A
X2
C
X1
Step 7
Requires 7 , A , C
Lift the BACK CUSHION (7) up and insert SCREWS (A) into
each upper hole of ARMRESTS (8) and the BACK CUSHION (7).
NOTE: Please make sure all screws are tightened firmly.
AX1CX1
7
A C
X2 X1

14 15
Step-by-Step Instructions
Step 8
Requires 8
Place the plastic CAPS (B) into the holes of the ARMRESTS (8).
Four CAPS per side.
B
X8
BX8
Caring For Your Item
Note:
Wipe clean with a damp cloth. Do not use solvent-type cleaning agents.
Do not use bleach or other abrasive cleaners on the frame parts.
Made in China
Imported by Trileaf Distribution Trifeuil
Toronto, Canada M4S 2B8