for Living 424230 User manual

Assembly Instructions
Toll free: 1-877-483-6759
IMPORTANT: Please read this manual carefully before beginning assembly of this product.
Keep this manual for future reference.
Trestle Entertainment Unit
Product No. 168-0043-0
Model No. 424230

Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
Made in China
When it comes to products for your home, it's essential they
stand up to the realities of everyday family life. Designed with
your family in mind, For Living® products combine timeless style
and family-friendly features. Now you can focus on what's
important—creating lasting memories with your family.

3
Table of Contents 3
Important Safety Instructions 3
Parts List 4-5
Assembly Preparation 6
Assembly 7-22
Cleaning and Maintenance 23
Technical Data 23
Warranty 24
Table of Contents
Important Safety Instructions
Death or serious injury may occur when children climb on audio, video equipment or entertainment
furniture. A remote control or toys placed on the furniture may encourage a child to climb on the furniture
and as a result may tip over onto the child.
NEVER allow children to climb or play with the TV or furniture supporting the TV.
NEVER place toys, food, remote, etc. on top of the TV or TV furniture.
ALWAYS use either the safety hardware as instructed or other wall anchoring device.
Placing audio and/or video equipment on furniture not specifically designed to support audio and/or video
equipment may result in death or serious injury due to furniture collapse or over turning onto a child.
NEVER place a TV on furniture that is not intended to support a TV.
NEVER exceed the maximum size and weight of the TV shown in the instructions.
Be sure to apply the TV warning label as shown in the instructions.
Overloading drawers and shelves may result in furniture that can break or sag, or tip over which may
result in injury.
NEVER exceed the weight limits shown in the instructions.
Place the heavier items on lower shelves as far back from the front as possible.
Load the bottom surfaces first to avoid top-heavy furniture.
Moving furniture that is not designed to be moved or equipped with castors may result in injury or damage
to furniture or personal property.
ALWAYS unload shelves and drawers, starting with the top surfaces, before moving.
NEVER push or pull furniture on carpet. Have a friend help lift properly to move and/or reposition it.
Caution! Always keep children under close supervision while they are using or around this product.
Never leave children unattended.
IMPORTANT: RETAIN FOR FUTURE REFERENCE, AND READ CAREFULLY
Warning! To reduce the risk of serious injury, read the following safety instructions
before assembling and using the entertainment unit.

4
Parts List
Product No. 168-0043-0 •Model No. 424230
Right back leg - 1
2
2
Right upright - 1
4
4
Left centre leg - 1
5
5
Left upright - 1
6
6
Left top - 1
11
11
Top molding - 2
12
12
Molding - 4
13
13
Left brace - 1
14
14
Long skirt - 1
15
15
Left shelf - 1
16
16
Centre bottom - 1
17
17
Right shelf - 1
18
18
Back - 1
19
19
Left bottom - 1
20
20
Right bottom - 1
21
21
Right front leg - 1
1
1
Centre top - 1
10
10
Right centre leg - 1
3
3
Left back leg - 1
8
8
Right top - 1
9
9
Left front leg - 1
7
7

5
Parts List
Short skirt - 2
22
22
Drawer bottom - 1
23
23
Drawer front - 1
24
24
Left drawer side - 1
25
25
Right drawer side - 1
26
26
Drawer back - 1
27
27
Right brace - 1
28
28
Cabinet right - 1
A
A
D
D
Drawer left - 1
Cabinet left - 1
B
B
Drawer right - 1
C
C
Small hidden cam - 4
F
F
Cam screw - 43
G
G
Double dowel - 4
H
H
Applique card - 2
K
K
Shown at actual size
Black 1-9/16" flat head screw - 20
L
L
Warning label - 1
J
J
Never use this furniture with a
TV that is too large or too heavy.
Severe injury or death can occur.
The TV and furniture will be
unstable and may tip.
-The TV must weigh less than
50 lbs.
-The base of the TV must be able
to sit completely on this shelf.
Refer to instruction book for
complete safety information.
Note: This is a permanent label.
Do not try to remove. Surface
will be damaged. 01/18
Ne jamais utiliser ce meuble avec
un téléviseur qui soit trop large ou
trop lourd. Risque de provoquer
des blessures graves, voire mor-
telles. Le téléviseur et le meuble
seront instables et risquent de
se renverser.
-Le téléviseur doit peser
22,6 kg ou moins.
-Le socle du téléviseur doit
pouvoir être placé complètement
sur cette tablette.
Consulter le manuel d’instructions
pour information complète
concernant la sécurité.
Remarque: Cette étiquette est
permanente. Ne pas essayer de la
retirer. Causer des dommages à
la surface. 01/18
WARNING AVERTISSEMENT•
Large hidden cam - 47
E
E
M
M
Black 1-1/8" flat head screw - 8Shown at actual size
Silver 3/8" flat head screw - 10
N
N
Shown at actual size

Assembly Preparation
Caution!
• Proper placement of your entertainment unit is essential.
• Keep children away during assembly.
This product contains small parts which can be swallowed by children.
• Keep fingers away from the places where they can be pinched or trapped.
• Do not attempt to assemble the entertainment unit if any parts are missing.
Let us help you!
DO NOT RETURN YOUR PRODUCT TO THE STORE. CALL US FIRST!
1-877-483-6759
If you have questions regarding your product, require warranty assistance,
or have damaged or missing parts, please call our customer service toll-free helpline.
Contact us for assistance, we’re here to help.
IMPORTANT: Please read and understand this manual before any assembly. Before beginning assembly of
product, make sure all parts are present. Compare parts with packaging contents list. If any part is missing, or if
you have any questions, contact the service centre at 1-877-483-6759 (toll free).
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing
materials and place them back into the box. Do not dispose of the packing materials until assembly is complete.
Read each step carefully before beginning any assembly and make sure you understand each step. If you are
missing a part, please call our toll-free number for assistance 1-877-483-6759.
Needed for assembly:
6Product No. 168-0043-0 •Model No. 424230
Short
Screwdriver
No. 2 Phillips Screwdriver
Tip Shown Actual Size 1 person

7
Step 1
Requires 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 17, 20, 21, 24, G
Turn forty-three CAM SCREWS (G) into the exact holes shown in the LEGS (1, 2, 3, 5, 7, and 8), UPRIGHTS (4
and 6), TOPS (9, 10, and 11), BOTTOMS (17, 20, and 21), and DRAWER FRONT (24).
G
G
9
9
10
10
11
11
21
21
17
17
20
20
6
6
4
4
1
1
8
8
3
3
5
5
7
7
2
2
24
24
G
G
(43 used)
Assembly

8
Assembly
Step 2
Requires 3, 4, 5, 6, 9, 10, 11, 12, 14, 15, 16, 17, 18, 20, 21, 22, 25, 26, 28, E, F
Push forty-seven LARGE HIDDEN CAMS (E) into the LEGS (3 and 5), UPRIGHTS (4 and 6), TOP MOLDINGS (12),
SKIRTS (15 and 22), BRACES (14 and 28), SHELVES (16 and 18), and BOTTOMS (17, 20, and 21).
Push four SMALL HIDDEN CAMS (F) into the DRAWER SIDES (25 and 26).
Product No. 168-0043-0 •Model No. 424230
F
F
E
E
25
25
26
26
F
F
E
E(47 used)
The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Hole
Arrow
22
22
21
21
17
17
20
20
14
14
28
28
18
18
16
16
4
4
6
6
3
3
5
5
12
12
12
12
22
22
15
15
9
9
10
10
11
11

9
Assembly
Step 3
Requires 13, 16, 18, 20, 21, L
Fasten the MOLDINGS (13) to the SHELVES (16 and 18) and BOTTOMS (20 and 21). Use eight BLACK 1-9/16"
FLAT HEAD SCREWS (L).
18
18
13
13
13
13
13
13
13
13
NOTE: The larger
holes must face out
so the SCREWS
seat into the holes.
Shown at actual size
L
L
Surface without
HIDDEN CAMS
16
16
Surface without
HIDDEN CAMS
20
20
Surface without
HIDDEN CAMS
21
21
Surface without
HIDDEN CAMS
These surfaces
should be even.
L
L
(8 used)

10
Assembly
Step 4
Requires 15, 17, 20, 21, 22
Fasten the LONG SKIRT (15) to the CENTRE BOTTOM (17). Tighten one HIDDEN CAM.
Fasten the SHORT SKIRTS (22) to the BOTTOMS (20 and 21). Tighten four HIDDEN CAMS.
Product No. 168-0043-0 •Model No. 424230
20
20
Surface without
HIDDEN CAMS
21
21
Surface without
HIDDEN CAMS
Surface with
HIDDEN CAMS
22
22
15
15
17
17
22
22
1
2
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS
Surface with
HIDDEN CAMS

11
Assembly
Step 5
Requires 6, 17, 19, L
Fasten the LEFT UPRIGHT (6) to the CENTRE BOTTOM (17) and BACK (19). Use four BLACK 1-9/16" FLAT
HEAD SCREWS (L).
NOTE: Start each SCREW a few turns before completely tightening any of them.
Shown at actual size
L
L
15
15
17
17
6
6
Curved edge
Surface
with CAM
SCREWS
19
19
Curved edge
L
L

12
Assembly
Step 6
Requires 4, L
Fasten the RIGHT UPRIGHT (4) to the CENTRE BOTTOM (17) and BACK (19). Use four BLACK 1-9/16" FLAT
HEAD SCREWS (L).
NOTE: Start each SCREW a few turns before completely tightening any of them.
Product No. 168-0043-0 •Model No. 424230
Shown at actual size
L
L
17
17
4
4
Surface without
CAM SCREWS
Curved edge
19
19
L
L

13
Assembly
Step 7
Requires 3, 5
Fasten the CENTRE LEGS (3 and 5) to the LONG SKIRT (15) and CENTRE BOTTOM (17). Tighten four
HIDDEN CAMS.
17
17
15
15
3
3
5
5
The HIDDEN CAM is
closer to this edge.
The HIDDEN CAM is
closer to this edge.

14
Assembly
Step 8
Requires 12, 18, 21
Place one of the TOP MOLDINGS (12) onto the CAM SCREW in the RIGHT UPRIGHT (4). It will be fastened in a
later step.
Fasten the RIGHT SHELF (18) and RIGHT BOTTOM (21) to the RIGHT UPRIGHT (4). Tighten four HIDDEN CAMS.
Note: The TOP MOLDING (12) is not fastened to the RIGHT UPRIGHT (4) in this step.
Product No. 168-0043-0 •Model No. 424230
21
21
18
18
4
4
Surface with
HIDDEN CAMS
13
13
Surface without
HIDDEN CAMS
12
12
Unfinished edge
Finished edge

15
Assembly
Step 9
Requires 1, 2, 28, M
Fasten the RIGHT BRACE (28) to the LEGS (1 and 2). Use four BLACK 1-1/8" FLAT HEAD SCREWS (M).
Fasten the LEGS (1 and 2) to the RIGHT SHELF (18) and RIGHT BOTTOM (21). Tighten four HIDDEN CAMS.
NOTE: You will need to use your Short Screwdriver for the RIGHT SHELF (18).
21
21
18
18
28
28
2
2
1
1
12
12
Note: The RIGHT BACK LEG (2) is not fastened to the TOP MOLDING (12) in this step.
28
28
2
2
1
1
Surface with
HIDDEN CAMS
Unfinished edge
Shown at actual size
M
M
M
M
M
M

16
Assembly
Step 10
Requires 12, 16, 20
Place the remaining TOP MOLDING (12) onto the CAM SCREW in the LEFT UPRIGHT (6). It will be fastened in a
later step.
Fasten the LEFT SHELF (16) and LEFT BOTTOM (20) to the LEFT UPRIGHT (6). Tighten four HIDDEN CAMS.
Product No. 168-0043-0 •Model No. 424230
Note: The TOP MOLDING (12) is not fastened to the LEFT UPRIGHT (6) in this step.
20
20
16
16
6
6
12
12
Surface with
HIDDEN CAMS
Surface without
HIDDEN CAMS
Unfinished
edge
Finished
edge

17
Assembly
Step 11
Requires 7, 8, 14, M
Fasten the LEFT BRACE (14) to the LEGS (7 and 8). Use four BLACK 1-1/8" FLAT HEAD SCREWS (M).
Fasten the LEGS (7 and 8) to the LEFT SHELF (16) and LEFT BOTTOM (20). Tighten four HIDDEN CAMS.
NOTE: You will need to use your Short Screwdriver for the LEFT SHELF (16).
Note: The LEFT BACK LEG (8) is not fastened to the TOP MOLDING (12) in this step.
20
20
16
16
14
14
7
7
8
8
14
14
7
7
8
8
12
12
Surface with
HIDDEN CAMS
Unfinished edge
Shown at actual size
M
M
M
M
M
M

18
Assembly
Step 12
Requires A, B, N
Fasten the CABINET RIGHT (A) to the RIGHT CENTRE LEG (3) and RIGHT UPRIGHT (4). Use three SILVER 3/8"
FLAT HEAD SCREWS (N).
Fasten the CABINET LEFT (B) to the LEFT CENTRE LEG (5) and LEFT UPRIGHT (6). Use three SILVER 3/8" FLAT
HEAD SCREWS (N).
Note: Use the 2nd, 6th, and 12th holes from the roller end of the rail.
Product No. 168-0043-0 •Model No. 424230
4
4
3
3
5
5
6
6
A
A
Roller end
2nd hole12th hole 6th hole
B
B
N
N(6 used)
Roller end
Shown at actual size
N
N

19
Assembly
Step 13
Requires 9, 10, 11, H
Fasten the CENTRE TOP (10) to the TOPS (9 and 11). Use four DOUBLE DOWELS (H) and tighten eight
HIDDEN CAMS.
Fasten the TOPS (9, 10, and 11) to the LEGS (3 and 5), UPRGHTS (4 and 6), and BRACES (14 and 28). Tighten
ten HIDDEN CAMS.
11
11
9
9
10
10
11
11
10
10
9
9
H
H
14
14
5
5
6
6
4
4
3
3
These edges
must be even.
28
28
H
H
H
H

20
Assembly
Step 14
Requires 23, 24, 25, 26, 27, L
Fasten the DRAWER SIDES (25 and 26) to the DRAWER BACK (27). Use four BLACK 1-9/16" FLAT
HEAD SCREWS (L).
NOTE: Start each SCREW a few turns before completely tightening any of them.
Slide the DRAWER BOTTOM (23) into the grooves in the DRAWER SIDES (25 and 26) and DRAWER BACK (27).
Fasten the DRAWER FRONT (24) to the DRAWER SIDES (25 and 26). Tighten four HIDDEN CAMS.
Product No. 168-0043-0 •Model No. 424230
Shown at actual size
L
L
Groove
27
27
26
26
25
25
27
27
26
26
25
25
23
23
26
26
25
25
23
23
24
24
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Finished
surface
L
L
L
L