CAT5 VGA & Data Extender
ITEM NO.: VD01
VD01 is designed for VGA +RS232 data signal over cost effective CAT5 cable to instead
of VGA and Data cable. Used in pairs, the VGA& Data Extender is used in home or commercial
applications as a smart, fast and cost-effective, eliminates costly and bulky VGA and DATA cable,
allowing users can broadcast their video image or control a projector or any other RS-232 device
at a remote location. Ideal for sending video images to a projector and controlling it from you
desk. Perfect for touch screen or auto control equipment application.
VD01 CAT5 VGA & Data Extender
Features:
zSend VGA and RS232 Data over 2 CAT5 cable instead of VGA cable and data cable.
zEach set including transmitter and receiver.
zUp to 135 meters via 4 pairs CAT5 STP cable instead of VGA cable.
zSupports up to 1280x1024 pixels.
zApplication for sending Video images to a projector and controlling it from your desk
zPerfect for touch screen and auto control equipment application.
Installation:
Recommend Cable:
1. CAT5e UTP/STP or Cat6 UTP cable.
2. There are some certain models or brands of monitors with very high demand at
sync-sensitive, recommend use STP (shielding twisted pair) cable to instead of UTP
(unshielded twisted pair) cable.
RJ45 Pin Configuration: TIA/EIA 568B Wiring standard
1. Orange-white Red +
2. Orange Red -
3. Green-white H-Sync
4. Blue Green +
5. Blue-white Green -
6. Green V-Sync
7. Brown-white Blue +
8. Brown Blue -
VD01
Max. Distance via CAT 5 Cable
640x480 pixels (15MHz) 135M
800x600 pixels (30MHz) 105M
1024x768 pixels (60MHz) 75M
1280x1024 pixels (100MHz) 60M
1