ADDER ADDERLink INFINITY 3000 User manual

ADDERLink™INFINITY 3000
User Guide
Experts in
Connectivity
Solutions
KVM Extension
Solutions

INSTALLATION
1
CONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Introduction
Welcome................................................................................................................2
Gigabit connections ......................................................................................2
Features ............................................................................................................2
Technical Specications.................................................................................3
ALIF3000 unit features........................................................................................4
Supplied items.......................................................................................................5
Optional extras.....................................................................................................6
Installation
Connections ..........................................................................................................7
Mounting ................................................................................................................7
Video displays..................................................................................................8
Audio.................................................................................................................8
USB devices .....................................................................................................9
Power in .........................................................................................................10
KVM & VM network links...........................................................................11
VM-only network link..................................................................................12
Conguration
ALIF3000 conguration ....................................................................................13
The recessed power button ......................................................................13
Performing a manual factory reset...........................................................13
Creating an RDP session..................................................................................14
Operation
OLED screen.......................................................................................................16
Front panel indications......................................................................................17
Further information
Getting assistance ..............................................................................................18
Appendix A - Conguration page...................................................................19
Appendix B - Tips for success when networking ALIF units ....................20
Appendix C - Troubleshooting ........................................................................22
Appendix D - Glossary.....................................................................................24
Appendix E - Fiber/copper modules and cables..........................................27
Appendix F - Using the optional ALIF3000 rack shelf ..............................28
Appendix G - Open source licenses..............................................................29
Index
Contents

INSTALLATION
2
CONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Introduction
Safety
Please refer to the safety booklet provided in the box before use of this product.
WELCOME
Thank you for choosing the ADDERLink™
INFINITY 3000 (aka ALIF3000), a member of the
wide ranging ADDERLink INFINITY family of
advanced extenders.The ALIF3000 receiver has
been created to address the growing requirement
to connect users to both physical and virtual
machines. Using standardVDI (Virtual Desktop
Infrastructure) protocols - which are built-in; the
ALIF3000 delivers seamless access to legacy KVM
systems as well asVirtual Machine (VM) sources,
from the same common console.
Like all products within the ADDERLink INFINITY
family,ALIF3000 is fully administered by the AIM
application to allow centralized, secure management
of all aspects. Note, it is not possible to use
ALIF3000 outside of control by AIM.
Dual DisplayPort®video outlets provide support
for a single 2560x1600 display or two at a
maximum 1920x1200 resolution (60Hz refresh).
Gigabit connections
The ALIF3000 receiver has two SFP ports located on its rear panel, which can
accommodate a range of ber or copper networking modules, as suits your installation.
Each port can be connected to a separate gigabit ber (or copper) network to permit
access to a wider range of systems.A third network port (RJ45) is also provided to
allow separate access, where necessary, to a corporate network to gain theVM hosting
conguration data. All three connections are securely isolated within the ALIF3000 to
prevent any cross contamination between networks.
ALIF3000
ALIF TX
Network
switch
Virtual
machines
Legacy KVM
system(s)
Features
• Full management via ADDERLink INFINITY Manager (AIM),
• Pixel-perfect picture quality,
• Multiple 1Gb Ethernet links,
• Adder’s USB True Emulation for fast USB 2.0 switching,
• Bi-directional analog audio,
• Backwards compatibility with existing ADDERLink INFINITY range.

INSTALLATION
3
CONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Technical Specications
Operating/storage conditions
Operating temperature: 0 to 40ºC / 32 to 104ºF
Storage temperature: 0 to 40ºC / 32 to 104ºF
Storage and operating relative humidity: 10 to 90% non-condensing
Altitude: < 2000m
Power
External power: 12VDC, 5A
Typical power consumption: 20W
BTU: 68.24BTU/hr
Physical
Dimensions (L)210mm /8.3” x (W)215mm/8.5” x
(D)40mm/1.6”
Weight: 1.8kg / 4 lbs
Materials
Aluminium and steel construction
Connectors
Desk: 2x DisplayPort, 6x USB type A,
3x 3.5mm audio jack sockets.
Ethernet: 1x 8p8c (RJ45), 2x SFP+ cages.
Power: 3-pin Kycon socket.
USB
6 ports of USB2.0 with USB True Emulation to support keyboard, mouse and touch.
Max video resolution
Supports 1x 2560x1600 up to maximum refresh rates of 60Hz or 2x 1920x1200
Audio
Analog Line in/out 2 channel 16bit 48KHz 1V RMS in / 1V RMS out
Ethernet
1GbE (10/100/1000 support)
Packing Box
Dimensions: (L) 285mm /11.2” x (W) 245mm/9.6” x (D)145mm/5.7”
Weight: 2.5kg / 5.5lb
Approvals / Compliance
CE and FCC: See the compliance web page for the full list
Product information labels
The product information labels are located on the base of each unit.

INSTALLATION
4
CONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
ALIF3000 UNIT FEATURES
The ALIF3000 units are housed within durable, vented enclosures with connectors situated on the front and rear panels.The smart front faces
also feature an OLED information screen with control button (to scroll through the various informational pages) and also a status indicator.
Rear
Front
AdderLink
3000
1
2
Micro-
phone
Headphones USB
Reset
switch
OLED
screen
Control
button
and status
indicator
Audio -
Line out
13 2
35
46
21
12VDC
Primary
display
Power
in
Secondary
display
RJ45
network
port
Secondary
SFP port
Primary
SFP port
USB
Note: Units shipped before July 1st 2020, will have
their network link ports incorrectly labeled in the
order (L to R): 1,2, 3.

INSTALLATION
5
CONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
AdderLink
3000
1
2
SUPPLIED ITEMS
ALIF3000 package
Information wallet
containing:
Four self-adhesive rubber feet
Quick start guide
Safety document
ALIF3000 RX unit
Power adapter with
locking connector
and country-specic
power cord
1GbE copper SFP module

INSTALLATION
6
CONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
OPTIONAL EXTRAS
Dual unit 19” (1U) rack-mount shelf
Part number: RMK12
Audio cable 2m
(3.5mm stereo jacks)
Part number:VSC22
USB cable 2m (type A to B)
Part number:VSC24
1GbE single mode ber SFP module
Part number: SFP-SM-LC
1GbE multi mode ber SFP module
Part number: SFP-MM-LC
Please refer to the table in Appendix F for
information about ber modules and cables.
Replacement power adapter
with locking connector
Part number: PSU-IEC-12VDC-5A
Country-specic power cords
CAB-IEC-AUS (Australia)
CAB-IEC-EURO (Central Europe)
CAB-IEC-UK (United Kingdom)
CAB-IEC-USA (United States)
CAB-IEC-JP (Japan)
CAB-IEC-CN (China)
Display port video cable 2m
Part number:VSCD10A
Rack mount blanking plate
Part number: RMK12-BP
1GbE copper SFP module
Part number: SFP-CATX-RJ45

7
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
MOUNTING
Please see Appendix F for details about mounting options for ALIF units.
IMPORTANT:When mounting the ALIF units (and their power
adapters), ensure that the vents are not obscured and that there is
sufcient airow. The operating temperature range is 0 to 40ºC (0
to 104ºF) and must not be exceeded. Each power adapter is rated at
a maximum of 68.24BTU/hr.
Installation
CONNECTIONS
Installation involves linking the ALIF3000 unit to networks and your peripherals
(collectively known as the Console):
Click a connection to see details
IMPORTANT:When using an ADDERLink™ INFINITY Management (AIM)
server to congure ALIF units, it is vital that all ALIF units that you wish to
locate and control are set to their factory default settings. Otherwise they
will not be located by the AIM server. If necessary, perform a factory reset on
each ALIF unit.
Please also see Appendix B - Tips for success when networking ALIF units
ALIF3000 RX
VIDEO
DISPLAYS
page8 KVM &VM
network
page11
VM-only
network
page12
AUDIO
SDEVICE
page8
POWER
IN
page10
USB
DEVICES
page9
Suitable for installation in Information Technology Rooms in accordance with
Article 645 of the National Electrical Code and NFPA 75.
Peut être installé dans des salles de matériel de traitement de l’information
conformément à l’article 645 du National Electrical Code et à la NFPA 75.
HT

8
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
12
5
6
Video displays
The ALIF3000 unit supports two video displays,
each up to 1920x1200 or a single display at
2560x1600, with refresh rates up to 60Hz.
2 If required, connect the lead from the second video display to the
DisplayPort socket marked ‘2’ on the rear panel.
To connect video displays
1 Connect the lead from the primary video display to the DisplayPort
socket marked ‘1’ on the rear panel:
To
secondary
video display
To
primary
video
display
Audio
The ALIF3000 unit can support a microphone
as well as speakers and/or headphones.
To connect a microphone, headphones and/or speakers
1 Connect the lead from a
mono microphone to the
3.5mm socket labeled
on the front panel.
2 Connect the lead from
headphones to the 3.5mm
socket labeled on the
front panel.
3 Connect the lead from
stereo speakers to the
3.5mm socket labeled
on the front panel.
3000
AdderLink
1
2
ALIF3000 RX
VIDEO
DISPLAYS
AUDIO
SDEVICE
POWER
IN
USB
DEVICES
KVM&VM
NETWORK
VM-ONLY
NETWORK
ALIF3000 RX
VIDEO
DISPLAYS
AUDIO
SDEVICE
POWER
IN
USB
DEVICES
KVM&VM
NETWORK
VM-ONLY
NETWORK
To/from
audio
devices

9
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
12VDC
5
3
6
4
USB devices
The ALIF3000 unit has six USB ports (two on the front panel and four on the rear) to
which peripherals may be connected.
To connect more than six peripherals, one or more USB hubs may be used.The total
current that may be drawn from the USB ports is 1.2A, which should be sufcient for
a keyboard, mouse (no more than 100mA each) and any two other devices (500mA
maximum each). If more power for USB devices is required, use a powered USB hub.
To connect USB devices
1 Connect the lead from the device to any
of the USB sockets on the front and rear
panels of the unit.
3000
1
2
ALIF3000 RX
VIDEO
DISPLAYS
AUDIO
SDEVICE
POWER
IN
USB
DEVICES
KVM&VM
NETWORK
VM-ONLY
NETWORK
To USB
peripherals To USB
peripherals

10
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
12VDC
12VDC
Power in
A power adapter is supplied with a country-
specic power cord. The power adapter uses
a locking-type plug to help prevent accidental
disconnection; please follow the instructions
shown on the right when disconnecting a
power adapter.
Note: When rst powered on and booting up, the
indicators and screen of the ALIF3000 unit will
not respond for roughly 40 seconds.
To connect the power adapter
1 Attach the output plug of the supplied
power adapter to the power input socket
on the left side of the rear panel. As you
insert the plug, pull back slightly on the
outer body to assist the locking mechanism
until the plug is fully inserted.
2 Insert the IEC connector of the supplied country-specic power cord to the socket of
the power adapter.
3 Connect the power cord to a nearby mains supply socket.
To disconnect the power adapter
1 Isolate the power adapter from the mains supply.
2 Grasp the outer body of the power adapter plug
where it connects with the node.
3 Gently pull the body of the outer plug away from
the node. As the body of the plug slides back, it will
release from the socket and you can fully withdraw
the whole plug.
IMPORTANT: Please read and adhere to the electrical safety information
given within the Safety information booklet provided with this product. In
particular, do not use an unearthed power socket or extension cable.
Note: The unit and the power adapter generate heat when in operation and will become
warm to the touch. Do not enclose them or place them in locations where air cannot circulate
to cool the equipment. Do not operate the equipment in ambient temperatures exceeding
40 degrees Centigrade. Do not place the products in contact with equipment whose surface
temperature exceeds 40 degrees Centigrade.
From the
power adapter
Gently pull back the plug outer
body to release the lock
KVM&VM
NETWORK
VM-ONLY
NETWORK
ALIF3000 RX
VIDEO
DISPLAYS
AUDIO
SDEVICE
POWER
IN
USB
DEVICES

11
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
2
13
1
2
2
13
1
2
ALIF3000 RX
VIDEO
DISPLAYS
KVM&VM
NETWORK
VM-ONLY
NETWORK
AUDIO
SDEVICE
POWER
IN
USB
DEVICES
2 Make your connection(s) between
the chosen SFP module(s) and
suitable network switch(es):
3 For ber links, close the latch over the link connectors to lock them into place.
Fiber links
To create ber links
1 Insert the appropriate optional SFP
module (SFP-MM-LC, SFP-SM-LC or
SFP-CATX-RJ45) into socket 1 and/
or 2 located on the rear panel of the
unit:
KVM & VM network links
Tw o SFP ports are located on the rear panel to allow ber or copper links to separate
networks, according to the type of modules that are inserted.
Fiber SFP
module
Note: SFP-CATX-RJ45 for use with CAT5e (and above) cable.
SFP-SM-LC modules require OS1 or OS2 single mode ber.
SFP-MM-LC modules require OM1, OM2, OM3 or OM4 multi-mode ber.
See Appendix E for details.
Copper/CATx
SFP module
CATx link
Note: Units shipped before
July 1st 2020, will have
their network link ports
incorrectly labeled in the
order (L to R): 1,2, 3.
Note: Units shipped before
July 1st 2020, will have
their network link ports
incorrectly labeled in the
order (L to R): 1,2, 3.

12
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
23
1
VM-only network link
An RJ45 network socket is located on the rear panel to allow (up to) a 1Gb
CATx copper link to a network.
Note: This port is not supported by AIM and the ALIF3000 is not discoverable by AIM
through this port. It is used to access VM machines on a separate network to the KVM
network.
KVM&VM
NETWORK
VM-ONLY
NETWORK
ALIF3000 RX
VIDEO
DISPLAYS
AUDIO
SDEVICE
POWER
IN
USB
DEVICES
To create a copper link
1 Insert a suitable CATx link cable
between the RJ45 socket ‘3’ on the
rear panel and your network switch.
To network
switch

13
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
Conguration
ALIF3000 CONFIGURATION
ALIF3000 units depend upon ADDERLink INFINITY Manager (AIM) for almost all of
their conguration. As a new ALIF3000 unit is added to a network it must be in its
factory default mode so that AIM can engage with it and begin managing its resources. If
an ALIF3000 is not in factory default mode, use the procedure shown right to reset it.
Note: When rst powered on and booting up, the indicators and screen of the ALIF3000 unit will
not respond for roughly 40 seconds.
AIM congures all ports on the ALIF3000 except for the RJ45 network port (labeled
‘3’) on the rear panel.This port allows connection to a network separate from the main
KVM/VM links.
Please refer to:
• Creating an RDP session on the next page in this guide for a walkthrough example,
• The ADDERLink INFINITY Manager user guide (available from adder.com) for details
about AIM conguration.
Performing a manual factory reset
A factory reset returns ALIF3000 unit to its default
conguration.
To perform a manual factory reset
1 Power on the ALIF3000 unit.
2 Press-and-hold the button located next to the front
panel OLED screen for 10 seconds until the indicator
turns blue and the OLED screen shows the message:
In factory reset mode
3 You can now either:
• Return to normal operation without resetting:
Press the button next to the OLED screen again.
• Continue with the factory reset: Use a long narrow
implement (e.g. a straightened-out paper clip) to
press-and-release the recessed power button on
the front panel to power it off.Wait ten seconds
and press the button again to power on the unit.
4 Once the factory reset has been carried out the unit
should now be ready for discovery by an AIM server.
AdderLink
The recessed power button
On the left hand side of the ALIF3000 front panel is a
recessed power button which has a couple of uses:
• During a factory reset, this button is used to
conrm the action, see right.
• In normal operation, this button can be used to
initiate a controlled shut down of the unit. Once
shut down in that manner, another press of the
button will boot the unit again without having to
cycle the power input. Note: Whenever the unit is rst
powered on, it will start as normal, it is not necessary to
press this button at power on.
The recessed power button is accessible using a long
narrow implement (e.g. a straightened-out paper
clip). Its location is similar to the recessed buttons
on other ALIF units, however, its function is slightly
different.
AdderLink
HT

14
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
CREATING AN RDP SESSION
This section details the steps required to congure a typical RDP session within
ADDERLink INFINITY Manager (AIM).This diagram shows a typical connection layout:
In the sample layout above, the ALIF3000 is connected to two separate networks:
• The Innity network gives access to hosts that are connected via ALIF transmitters,
• The Corporate network is where the virtual machines running RDP hosts reside.
Prerequisites
• The AIM Manager is running rmware version 4.11 or above.
• The ALIF3000 is connected to the networks and is recognised by the AIM Manager.
• The Corporate network has a DHCP server to issue the CATx interface its IP
address, subnet mask, gateway and DNS settings.
ALIF3000
AIM
ALIF TX ALIF TX
Infinity
network
Corporate
network
Virtual
machines
To create an RDP session
1 Within the AIM Manager’s network interface, navigate to the Transmitters page.
2 At the top of the page, click on Add VDI.
The VDI Type will default to RDP.
3 Enter the RDP Name for the host.
4 Enter the IP Address or the DNS Name for the RDP host.
5 If the RDP Host is part of a Windows domain, enter the Domain Name here (this is
essential as it cannot be entered during login). Otherwise leave this blank.
6 If you are not using the default 3389 port, change the RDP Port number.
7 Click Save.A channel for the transmitter will be generated based on the transmitter’s
name, in this instance Channel My Workstation:
By default, the new channel will have no users or user groups access assigned.

15
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
8 Click for the new channel entry to add users who will be granted access to it:
9 On the console attached to the ALIF3000, open the OSD (default CTRL+ALT+C) and log
in as a user who has access to the newly created RDP Channel:
10 Click on rst to enter the user credentials:
You should now see the new RDP channel displayed on the OSD or amongst the pages
of other channels and presets.An RDP channel only has two icons, unlike the other
channels for standard ALIF transmitters:
- To enter the login credentials for the RDP session.
- To make a private connection to the RDP host.
11 Enter the Username and Password required to access the RDP host.
• Note: Do not use the # or “ characters or spaces within passwords.
12 Click Save.
13 Click on to start the RDP session.

16
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
In operation, many ALIF3000 installations require no intervention once congured. The
unit takes care of all connection control behind the scenes so that you can continue to
work unhindered.
OLED SCREEN
• Press and release the button to wake the OLED screen and begin showing information.
• Press the button to advance to the next page.
• If a page is empty e.g there is no alert to show or no IP for an interface, then the page
will be skipped.
• Press the button on the last page to return to the rst page.
Operation
ALIF 3000
Searching...
–––––––––––––––
Channel Name
VID VID AUD USB
–––––––––––––––
Alert Text
–––––––––––––––
IP Address 2
10.0.20.37
–––––––––––––––
AIM Address
10.0.10.10
–––––––––––––––
Software Version
1.0.0.123
–––––––––––––––
Monitor 1
2560x1600@60
–––––––––––––––
MAC Address 1
000F5802E7A7
–––––––––––––––
Serial Number:
1904A0000164
–––––––––––––––
Status page
This primary page will indicate the
AIM connection status: Searching...,
Connecting.... or Connected.
Connection page
Shows the name of the current channel
and also the console peripherals that are
connected and operating.
Alert page
If there is an alert, this page will be
displayed with an explanation. Once
shown, the Status page will be returned.
IP Address pages
With each press, the IP addresses of the
three network ports will be shown in
turn.
AIM Address page
When connection has been made with an
AIM server, the server’s address will be
shown here.
Software version page
Displays the current software version.
Display resolution pages
With each press, the resolutions of the
two displays will be shown in turn (if both
connected).
MAC Address pages
With each press, the MAC addresses of
the three network ports will be shown
in turn.
Serial Number page
Shows the serial number of the ALIF3000
unit.
Note: When rst powered on and booting up, the indicators and screen
of the ALIF3000 unit will not respond for roughly 40 seconds.
HT

17
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
FRONT PANEL INDICATIONS
The front panel of each ALIF3000 unit features a single indicator capable of producing
numerous color and ash patterns to provide a useful guide to operation as well as an
OLED information screen.
Indicator color and ash patterns
The single front panel indicator uses varying color and ashing patterns to signal key
status:
Off No power.
Green All services present as compared to the conguration required.
Amber Running but video, USB or network link missing (or not connected
to a transmitter/VM).
Red Booting before processor loaded or failed.
Blue Factory reset mode active.
Red/green ash Booting into factory recovery mode.
Green/blue ash Upgrade mode active.
Fast green ash Identify mode active.

18
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
This chapter contains a variety of information, including the following:
• Getting assistance - see right
• Appendix A - Conguration page
• Appendix B - Tips for success when networking ALIF units
• Appendix C - Troubleshooting
• Appendix D - Glossary
• Appendix E - Fiber modules and cables
• Appendix F - Using the optional ALIF3000 rack shelf
• Appendix G - Open source licenses
GETTING ASSISTANCE
If you are still experiencing problems after checking the information contained within this
guide, then please refer to the Support section of our website:
www.adder.com
Further information
LITHIUM BATTERY
CAUTION:This product contains a lithium battery which must be disposed
of in the correct manner.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE.
• If the lithium battery needs to be changed, you must return the product to your
nearest Adder dealer.The battery must be replaced by an authorized Adder dealer.
• Once the product has come to the end of its useful life, the lithium battery must be
removed as part of the decommissioning process and recycled in strict accordance
with the regulations stipulated by your local authority.Advice on battery removal can
be provided on request by Adder.
HT

19
INSTALLATIONCONFIGURATIONOPERATION
FURTHER
INFORMATION
INDEX
APPENDIX A - Conguration page
The ALIF3000 gains all of its conguration details via AIM; local changes are not possible.
Therefore the conguration page mainly provides information only and indicates the
settings that have been enacted by the controlling AIM server.
To view the conguration page
1 Using a system connected to the same network as the ALIF3000 unit, open a web
browser and access the IP address of the ALIF3000.
• To discover the ALIF3000 unit’s main IP address: Press
the small button on the front panel next to the
OLED screen to reveal the value for IP Address 1 or
2(depending on which network port(s) are used).
2 The conguration page should be displayed:
IP Address 2
10.0.20.37
–––––––––––––––
Identify unit
When clicked, these buttons cause the front panel indicators to ash to assist with
identifying the ALIF unit within a rack.
• The Identify Unit (short) button ashes the indicators for ve seconds.
• The Identify Unit (long) button ashes the indicators for one hour but can be
overridden by clicking the Identify Unit (short) button.
Remote Support
The ALIF3000 remote support feature allows Adder technical support to connect via a
secure SSL connection, should the need arise.When you click the Enable button, the unit
will generate and display a single-use password (and port number) on the page.Attach
the unit to an internet-connected switch (using a bre or copper link); note the resulting
IP address and pass this, together with the generated password and port number, to
Adder technical support, allowing limited direct access.