Forever Redwood ADIRONDACK User manual

ASSEMBLY INSTRUCTIONS FOR THE
ADIRONDACK WOODEN
ROCKING CHAIR
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
ADIRONDACK WOODEN ROCKING CHAIR
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
Drawing
Description
Seat
Armrests
Backrest
Qty.
1
2
1
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
ADIRONDACK WOODEN ROCKING CHAIR
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
Drawing
Description
5/16´´ X 3 ½´´´ Bolts
(To attach the armrest to the sear. / To
attach the backrest to the armrest).
5/16´´ Washers
5/16´´ Nuts
Note: Dimensions of your hardware will vary depending on size.

P| 3
ADIRONDACK WOODEN ROCKING CHAIR
www.ForeverRedwood.com
No
1
2
3
DESCRIPTION
Seat
Armrests
Backrest
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.
2
1
2
3

P| 4
ADIRONDACK WOODEN ROCKING CHAIR
www.ForeverRedwood.com
Step 1: Use 5/16´´ x 3 ½´´ bolts (A) with washers (B) & nuts (C) to attach the armrest (2) to the seat (1).Each part has a series
of numbers that indicate where to attach the part with the corresponding number.
Step 2: Finally, attach the backrest (3) to the armrests, use 5/16´´ x 3 ½´´ bolts (A) with washers (B) & nuts (C). Each part has a
series of numbers that indicate where to attach the part with the corresponding number.
1
2
5/16´´ X 3 ½´´ Bolts
2
3
5/16´´ X 3 ½´´ Bolts

P| 5
ADIRONDACK WOODEN ROCKING CHAIR
www.ForeverRedwood.com
This completes the Chair Assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't
hesitate tocall us (866 332 2403) or email us. We are here to support you.