Forever Redwood LIGHTHOUSE SHELVING User manual

ASSEMBLY INSTRUCTIONS FOR THE
LIGHTHOUSE SHELVING
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
LIGHTHOUSE SHELVING
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
Drawing
.
Description
Shelf
Knee Braces
Qty.
1
4
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
LIGHTHOUSE SHELVING
www.ForeverRedwood.com
HARDWARE LIST
No.
A
Drawing
Description
8 X 3`` Deck Screws
(To attach the Shelf and the Braces to the
wall. / To attach the knee braces to the
Shelf).
Note: Dimensions of your hardware will vary depending on size.

P| 3
LIGHTHOUSE SHELVING
www.ForeverRedwood.com
No
1
2
DESCRIPTION
Shelf
Knee Braces
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.
1
2
2
2
2

P| 4
LIGHTHOUSE SHELVING
www.ForeverRedwood.com
Step 1: Attach the shelf (1) to the wall with 3`` deck screws (A). Each part has a series of numbers that indicate where to attach
the part with the corresponding number.
Step 2: Then, attach the knee braces (2) to the wall and shelf top with 3`` deck screws (A). Each part has a series of numbers that
indicate where to attach the part with the corresponding number.
1
2
2
2
2
3`` Deck Screws
3`` Deck Screws
3`` Deck Screws

P| 5
LIGHTHOUSE SHELVING
www.ForeverRedwood.com
This completes the Shelf assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't
hesitate to call us (866 332 2403) or email us. We are here to support you.