Forever Redwood OCTAGONAL PICNIC TABLE User manual

ASSEMBLY INSTRUCTIONS FOR THE
OCTAGONAL PICNIC TABLE
(ATTACHED BENCHES)
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
Octagonal Picnic Table (Attached Benches)
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
4
5
Drawing
Description
Tabletop
Legs
Cross Supports
Diagonal Supports
Benches
Qty.
1
4
4
8
4
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
Octagonal Picnic Table (Attached Benches)
www.ForeverRedwood.com
CONTENT OF BOXES
No.
A
B
C
Drawing
Description
3/8´´ X 6 ½´´ Bolts
(To attach the legs to the tabletop /To
attach the cross supports to the legs. / To
attach the benches to the cross supports).
5/16´´ X 5 ½´´ Bolts
(To attach the diagonal supports to the
legs).
5/16´´ X 3 ½´´ Bolts
(To attach the diagonal supports to the
benches).
Note: Dimensions of your hardware will vary depending on size.

P| 3
Octagonal Picnic Table (Attached Benches)
www.ForeverRedwood.com
No
1
2
3
4
5
DESCRIPTION
Tabletop
Legs
Cross Supports
Diagonal Supports
Benches
Note: Part numbers in the Drawing are
for reference only. These do not match to
the numbers marked on the parts sent.
2
2
2
1
3
2
4
4
4
4
4
4
4
5
5
5
5
3
4

P| 4
Octagonal Picnic Table (Attached Benches)
www.ForeverRedwood.com
Step 1: Place the tabletop upside down. After that, attach the legs (2) to the tabletop (1)with 3/8´´ x 6 ½´´ bolts (A). Each part
has a series of numbers that indicate where to attach the part with the corresponding number.
Step 2: Use 3/8´´ x 6 ½´´ bolts (A) to attach the cross supports (3) to the legs. Each part has a series of numbers that indicate
where to attach the part with the corresponding number.
2
2
2
2
3
1
3
3/8´´ X 6 ½´´ Bolts
3/8´´ X 6 ½´´ Bolts

P| 5
Octagonal Picnic Table (Attached Benches)
www.ForeverRedwood.com
Step 3: Turn the table over its feet. After that, attach the benches (5) to the cross supports with 3/8´´ x 6 ½´´ bolts (A). Each part
has a series of numbers that indicate where to attach the part with the corresponding number.
Step 4: Finally, use 5/16´´ x 5 ½´´ (B) bolts to attach the diagonal supports (4) to the legs. After that, attach the diagonal supports
(4) to the benches with 5/16´´ x 3 ½´´ bolts (C). Each part has a series of numbers that indicate where to attach the part with the
corresponding number.
5
5
5
5
4
3/8´´ X 6 ½´´ Bolts
4
4
4
5/16´´ X 3 ½´´ Bolts
5/16´´ X 5 ½´´ Bolts

P| 6
Octagonal Picnic Table (Attached Benches)
www.ForeverRedwood.com
This completes the Picnic Table assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question,
don't hesitate to call us (866 332 2403) or email us. We are here to support you.