Forever Redwood REDWOOD ADIRONDACK CHAIR User manual

ASSEMBLY INSTRUCTIONS FOR THE
REDWOOD ADIRONDACK CHAIR
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
REDWOOD ADIRONDACK CHAIR
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
Drawing
Description
Seat
Legs
Back Rest
Qty.
1
2
1
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
REDWOOD ADIRONDACK CHAIR
www.ForeverRedwood.com
HARDWARE LIST
No.
A
Drawing
Description
5/16´´ X 3 ½´´ Bolts
(To attach the seat to the legs. / To attach
the legs to the backrest).
Note: Dimensions of your hardware will vary depending on size.

P| 3
REDWOOD ADIRONDACK CHAIR
www.ForeverRedwood.com
No
1
2
3
DESCRIPTION
Seat
Legs
Back Rest
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.

P| 4
REDWOOD ADIRONDACK CHAIR
www.ForeverRedwood.com
Step 1: Place the seat (1) on the ground. After that, use 5/16’’ x 3 ½’’ bolts (A) to attach the legs (2) to the seat (1). Each part
has a series of numbers that indicate where to attach the part with the corresponding number.
Step 2: Use 5/16’’ x 3 ½’’ bolts (A) to attach the backrest (3) to the legs. Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
5/16´´ X 3 ½´´ Bolts
1
2
2
5/16´´ X 3 ½´´ Bolts
3

P| 5
REDWOOD ADIRONDACK CHAIR
www.ForeverRedwood.com
This completes the Adirondack Chair assembly. Hope you enjoy your set for many decades. If you ever have a problem or a
question, don't hesitate to call us (866 332 2403) or email us. We are here to support you.