Forever Redwood PENNY WOODEN SUN LOUNGER User manual

ASSEMBLY INSTRUCTIONS FOR THE
PENNY WOODEN SUN LOUNGER
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
PENNY WOODEN SUN LOUNGER
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
Drawing
Description
Backrest
Seat
Qty.
1
1
HARDWARE LIST
No.
A
Drawing
Description
5/16´´ X 3 ½´´ Bolts
(To attach the backrest to the seat).
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.
Note: Dimensions of your hardware will vary depending on size.

P| 2
PENNY WOODEN SUN LOUNGER
www.ForeverRedwood.com
No
1
2
DESCRIPTION
Backrest
Seat
Note: Part numbers in the Drawing are for reference only. These do not
match to the numbers marked on the parts sent.
1
2

P| 3
PENNY WOODEN SUN LOUNGER
www.ForeverRedwood.com
Step 1: Attach the backrest (1) to the seat (2) with 5/16’’ x 3 ½’’bolts (A). Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
2
2
2
5/16´´ X 3 ½´´ Bolts
1
1

P| 4
PENNY WOODEN SUN LOUNGER
www.ForeverRedwood.com
This completes the Penny Wooden Sun Lounger Assembly. Hope you enjoy your set for many decades. If you ever have a
problem or a question, don't hesitate to call us (866 332 2403) or email us. We are here to support you.