Forever Redwood LIGHTHOUSE User manual

ASSEMBLY INSTRUCTIONS FOR THE
LIGHTHOUSE WOODEN ROCKING CHAIR
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
Lighthouse Wooden Rocking Chair
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
3
Drawing
Description
Backrest
Seat
Legs
Qty.
1
1
2
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
Lighthouse Wooden Rocking Chair
www.ForeverRedwood.com
HARDWARE LIST
No.
A
B
C
D
E
F
Drawing
Description
3/8´´ X 7´´ Bolts
(To attach the backrest to the seat).
5/16´´ X 3 ½´´ Bolts
(To attach the legs to the seat).
5/16´´ X 4 ½´´ Bolts
(To attach the legs to the backrest).
3/8’ ’ Nuts
5/16´´ Nuts
3/8´´ x 7/8´´ Washers

P| 3
Lighthouse Wooden Rocking Chair
www.ForeverRedwood.com
No
1
2
3
DESCRIPTION
Backrest
Seat
Legs
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.

P| 4
Lighthouse Wooden Rocking Chair
www.ForeverRedwood.com
Step 1: Use 3/8´´ X 7´´ bolts (A) to attach the backrest (1)to the seat (2). Each part has a series of numbers that indicate where
to attach the part with the corresponding number.
Step 2: Finally, attach the legs (3) to the seat and to the backrest with 5/16´´ x 3 ½´´ bolts (B). After that use 5/16´´ x 4 ½´´ bolts
(C) to attach the legs to the backrest. Each part has a series of numbers that indicate where to attach the part with the corresponding
number.
5/16´´ X 4 ½´´ Bolts
2
1
3
3
5/16´´ X 3 ½´´ Bolts
3/8´´ X 7´´ Bolts
5/16´´ X 3 ½´´ Bolts

P| 5
Lighthouse Wooden Rocking Chair
www.ForeverRedwood.com
This completes the Rocking Chair assembly. Hope you enjoy your set for many decades. If you ever have a problem or a
question, don't hesitate to call us (866 332 2403) or email us. We are here to support you.