Forever Redwood ELI'S REDWOOD POTTING BENCH User manual

P| 0
ELI’S REDWOOD POTTING BENCH
www.ForeverRedwood.com
ASSEMBLY INSTRUCTIONS FOR THE
ELI’S REDWOOD POTTING BENCH
866.332.2403 (TOLL FREE) (707) 640.29.05 (Option 4) Direct Line for the Design
Department; 7am –7pm Pacific Time, Monday-Saturday

P| 1
ELI’S REDWOOD POTTING BENCH
www.ForeverRedwood.com
NOTE: Assembly is best done by two people. To assemble your product, you need a Hammer, a Ratch or a wrench and if
required a Drill.
PROCESS TO INSTALL THE HARDWARE PROVIDED.
Required Tools (Are not included in your hardware packing).
To install the bolts.
Insert the carriage bolts into the holes and lightly tap with a hammer until the square neck fit in the wood piece and the bolt
head must flush with the wood piece. Finally, place the washer and the nut and carefully tighten it using a ratchet with the
necessary socket or a wrench.

P| 2
ELI’S REDWOOD POTTING BENCH
www.ForeverRedwood.com
To install the lag bolts.
Place the washers in their lag bolts. After that, insert the lag bolts into the holes and carefully tighten it using a ratchet with
the necessary socket.
Use the washers only for the Wood Pieces.
To install the deck screws.
Insert the deck screws into the holes and carefully tighten it using a drill.

P| 3
ELI’S REDWOOD POTTING BENCH
www.ForeverRedwood.com
CONTENT OF BOXES
Qty.
Description
Drawing
No.
2
Legs
1
1
Floor
2
1
Parquet shelves
3
2
Drawer
4
2
Shelves
5
HARDWARE LIST
Qty.
Description
Drawing
No.
16
3/8” x 4 ½” bolts
BL1
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the
parts sent.

P| 4
ELI’S REDWOOD POTTING BENCH
www.ForeverRedwood.com
DESCRIPTION
No.
Legs
1
Floor
2
Parquet shelves
3
Drawer
4
Shelves
5

P| 5
ELI’S REDWOOD POTTING BENCH
www.ForeverRedwood.com
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.

P| 6
ELI’S REDWOOD POTTING BENCH
www.ForeverRedwood.com
Step 1: Attach the legs (2) to the floor with 3/8” x 4 ½” bolts (BL1) with washer and nuts. Check the marked numbers on each
floor and place as drawings shown.
Step 2: Attach the Parquet shelve (2) to the legs (1), use 3/8” x 4 ½” bolts (BL1) with washer and nuts.Check the marked numbers
on each parquet shelve and place as drawings shown.
A-2
A-1
BL1
BL1
B-1

P| 7
ELI’S REDWOOD POTTING BENCH
www.ForeverRedwood.com
Step 3: Attach the shelves (5) to the legs (1) with 3/8” x 4 ½” bolts (BL1) with washer and nuts. Check the marked numbers on
each shelve and place as drawings shown.
Step 4: Finally, put the drawer (5) in place.
C-1
BL1
C-2

P| 8
ELI’S REDWOOD POTTING BENCH
www.ForeverRedwood.com
This completes the bench assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't
hesitate to call us (866 332 2403) or email us. We are here to support you.