Forever Redwood THE SUNSET PATIO TABLES User manual

ASSEMBLY INSTRUCTIONS FOR THE
THE SUNSET PATIO TABLES
866.332.2403 (TOLL FREE); 7am –7pm Pacific Time, Monday-Saturday

P| 1
THE SUNSET PATIO TABLES
www.ForeverRedwood.com
CONTENT OF BOXES
No.
1
2
Drawing
Description
Tabletop
Legs
Qty.
1
2
HARDWARE LIST
No.
A
Draw
Description
3/8´´ X 7´´ Bolts
(To attach the Legs to the Tabletop).
Note: Dimensions of your hardware will vary depending on size.
Note: Part numbers in the Content of Boxes Table are for reference only. These do not match to the numbers marked on the parts sent.

P| 2
THE SUNSET PATIO TABLES
www.ForeverRedwood.com
No
1
2
DESCRIPTION
Tabletop
Legs
Note: Part numbers in the Drawing are for reference only. These do not match to the numbers marked on the parts sent.
1
2
2

P| 3
THE SUNSET PATIO TABLES
www.ForeverRedwood.com
Step 1: Place the tabletop upside down. After that, use 3/8´´ x 7´´ bolts (A) to attach one leg (2) to the tabletop (1). Each part has
a series of numbers that indicate where to attach the part with the corresponding number.
Step2: Attach the other leg (2) to the tabletop with 3/8’’ x 7’’ bolts (A). Each part has a series of numbers that indicate where to
attach the part with the corresponding number.
2
3/8´´ X 7´´ Bolts
1
3/8´´ X 7´´ Bolts
2

P| 4
THE SUNSET PATIO TABLES
www.ForeverRedwood.com
Step 3: Finally, turn the table over is feet.
This completes the Table Assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't
hesitate to call us (866 332 2403) or email us. We are here to support you.