HAMPTON BAY SUNNYMEAD FRN-313982 User manual

THANK YOU
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item # 100 766 0435
Model # FRN-313982
USE AND CARE GUIDE
SUNNYMEAD 4 PIECE CHAT SET
.

Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.
2
Table of Contents
Table of Contents ................................... 2
Safety Information ................................. 2
What is covered ................................... 2
Warranty ........................................ 2
Coffee Table Pre-assembly
.......................... 3
Coffe Table Assembly
.............................. 4
Loveseat Pre-assembly ........................ . . . . . 9-10
Care and Cleaning ................................. 13
Important Safety Information
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by or
near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
SAVE THESE INSTRUCTIONS.
We recommend re-tightening all of the hardware two weeks after
assembly. Periodic checking of all connections and
hardware is also advised.
DANGER: Keep children out of the assembly area during
assembly.
WARNING: DO NOT use sharp equipment such as a knife
and scissors when removing the protective material, as
it may damage the product.
WARNING: DO NOT sit or stand on the table.
WARNING: DO NOT stand on the chair.
TWO YEAR LIMITED WARRANTY
WHAT IS COVERED
The frame is warranted to be free of manufacturing defects for two years from the purchase date. If the frame of your furniture fails (ie.
broken frame or weld) within two years of ownership, Hampton Bay will repair, provide replacement parts, or replace the product at
settings. This warranty is a limited warranty and applies to the original purchase only. Proof of purchase is required.
Warranty
two years
two years
Chair Pre-assembly .............................. . . 5-6
Chair assembly .............................. . . . . . 7-8
Loveseat Assembly ........................ . . . . . . . . . 11-12

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
3
Coffee Table Pre-assembly
PLANNING ASSEMBLY
Before beginning the assembly of this product, make sure all parts are present. Compare parts with Package Contents and Hardware
included lists. If any part is missing or damaged, do not attempt to assemble product, and return it to the place of purchase.
Installation requires two people.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA Bolt M6 x 20 mm 16
DD Small Washer 16
GG Hex Wrench 1
Part Description Quantity
K Table Leg 1
L Table Leg 4
AA DD GG
K L
PACKAGE CONTENTS

4
Coffee Table Assembly
1Attaching the Legs to the Table Top
Place the table top (K) upside down on a soft, clean and
level surface.
Fully tighten all the bolts.
2Completing the Assembly
Turn the table over.
Now the table is ready for use.
Insert the legs (L) into the table top (K), by
using M6 x 20 mm bolts (AA), small washers (DD), and hex wrench (GG).
Turn the self-leveling feet clockwise or counterclockwise
to balance the table as needed.
L
K
DD AA

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
5
Chair Pre-assembly
PLANNING INSTALLATION
Before beginning the assembly of this product, make sure all parts are present. Compare parts with Package Contents and Hardware
included lists. If any part is missing or damaged, do not attempt to assemble product, and return it to the place of purchase.
Installation requires two people.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA Bolt M6 x 20 mm 16
BB Bolt M6 x 35 mm 8
CC Bolt M8 x 35 mm 8
DD Small Washer 24
EE Larger Washer 8
FF Screw Nut-M6 8
GG Hex Wrench 1
HH Wrench 1
II Larger Hex Wrench 1
AA BB CC DD EE
FF GG HH II

6
Chair Pre-assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A Right Leg 2
B Left Leg 2
C Connecting Tube 4
D Seat 2
E Back 2
I Seat Cushion 2
J Back Cushion 2
A B C
D E I
J

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
7
Chair Assembly
1Attaching the Chair Legs
Place the right leg (A), left leg (B), and connecting
ube (C) on a soft, clean and level surface.
Do not overtighten the bolts.
2Attaching the Chair Seat and Back
Place the chair seat (D) and back (E) on a soft, clean and
level surface.
Attach the back (E) to the seat (D), by using hex wrench
(GG), M6 x 35 mm bolts (BB), small washers (DD), screw
nut-M6 (FF), and wrench (HH).
Attach the connecting tube (C) to the right leg (A) and left leg
(B) using M6 x 20 mm bolts (AA), small washers (DD),
and hex wrench (GG).
DD AA
A
CB
C
t
FF DD
BB
E
D

8
Chair Assembly (continued)
3Attaching the Legs
frames from step 1.
Attach the Back (E) and Seat (D) to the Legs (A & B),
by using M8 x 35 mm bolts (CC), Larger Washers (EE),
and Larger Hex Wrench (II).
Fully tighten all the bolts on this chair.
4Placing the Cushions
Place the Seat Cushion (I) and Back Cushion (J) on the Chair
Seat (D) and Chair Back (E).
The chair is now ready for use.
I
J
back from step 2 into the
EE CC
A
E
B
D

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
9
Loveseat Pre-assembly
PLANNING INSTALLATION
Before beginning the assembly of this product, make sure all parts are present. Compare parts with Package Contents and Hardware
included list. If any part is missing or damaged, do not attempt to assemble product, and return it to the place or purchase.
Installation requires two people.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA Bolt M6 x 20 mm 8
BB Bolt M6 x 35 mm 5
CC Bolt M8 x 35 mm 4
DD Small Washer 13
EE Larger Washer 4
FF Screw Nut-M6 5
GG Hex Wrench 1
HH Wrench 1
II Larger Hex Wrench 1
AA BB CC DD EE
FF GG HH II

10
Loveseat Pre-assembly (continued)
PACKAGE CONTENTS
Part Description Quantity
A Right Leg 1
B Left Leg 1
FSupport Tube 2
GSeat 1
HBack 1
I Seat Cushion 2
J Back Cushion 2
A B F
G H I
J

HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
11
Loveseat Assembly
1Attaching the Loveseat Legs
Do not overtighten the bolts.
2Attaching the Loveseat Seat and Back
Place the loveseat seat (G) and back (H) on a soft, clean
and level surface.
Attach the back (H) to the seat (G), by using hex wrench
(GG), M6 x 35 mm bolts (BB), small washers (DD), screw nut-M6 (FF),
and wrench (HH).
DD AA
A
F
B
F
FF DD BB
FF DD
BB
H
G
Place the right leg (A), left leg (B), and support tube
(F) on a soft, clean and level surface.
Attach the support tube (F) to the chair right leg (A) and left leg (B)
by using M6 x 20 mm bolts (AA), small washer (DD), and hex wrench (GG)

12
Loveseat Assembly (continued)
3Attaching the Legs
frames on step 1.
Attach the back (H) and seat (G) to the legs (A & B),
by using M8 x 35 mm bolts (CC), larger washers (EE),
and larger hex wrench (II)
Fully tighten all the bolts on this loveseat.
4Placing the Cushion
Place the seat cushion (I) and back cushion (J) on the
loveseat seat (G) and loveseat back (H).
The loveseat is now ready for use.
EE CC
A
H
G
B
J
J
I
I
Insert the nsihed loveset seat and back from step 2 into the leg

13
Maintenance
When cleaning the cushions, use a mild soap and water mixture (DO NOT USE BLEACH) and gently rub the surface of the fabric and rinse with
water. Allow time for cushions to dry before use. Always cover your cushions with waterproof covers when you are not using it to prolong the
life of the cushions.
Always make certain to cover your outdoor wood furniture with waterproof covers when you are not using it. Using covers will protect your
furniture from all-weather elements and prolong the life of the wood furniture. Do not use plastic covers to protect your furniture as this
may cause mold to grow on your furniture.
NOTICE: ONLY use the below Care and Maintenance section for outdoor furniture Use and Care Guides.
Care and Cleaning
Follow these care and maintenance instructions to ensure your outdoor furniture lasts for years to come.
FRAME CARE
Use mild soap and warm water to clean the frames.
Rinse with clean water and dry thoroughly. Be sure to drain any water accumulated inside the frames. To thoroughly drain frames,
remove footcaps and tilt frames, if necessary, to remove all water. Water allowed to accumulate inside the frames and then exposed to
sub-freezing temperatures can cause damage to frame tubing. Such damage caused by conditions other than normal is not covered
under warranty.
Any rust spots should be lightly sanded and treated with rust inhibitor and followed with an application of touch-up paint (not
included).
CUSHION CARE
Dust fabric weekly and remove dirt before it becomes embedded.
For cleaning, use a mild cleaner with warm water. Rinse thoroughly. Flip cushions on their sides with the zipper facing down and
unzipped to ensure that all water drains.
Avoid standing water on the surface of cushions.
Cushions should be stored in a dry place if possible.
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
Factory chair ID # FRN-313982-C
Factory loveseat ID # FRN-313982-L
Factory coffee table ID # FRN-313982-T