HAMPTON BAY Morgan Springs MM21-03 User manual

THANK YOU
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item #1005880898
Model #MM21-03
deep seating set
Morgan Springs Brown 4-Piece Woven Outdoor Deep
Seating Set with Chili Cushions

Table of Contents
Year Frame and ....................ytnarraWdetimiLcirbaF
Table of Contents ........................................................ 2
Important Safety Instructions ............................................ 2
Warranty ..........................................................................
Pre-Assembly....................................................................
Planning Assembly .............................................................
7
Hardware Included.................................................................
Package Contents ..................................................................
Assembly..... . ....................................................................
What Is Covered .... ...................................................................
What Is Not Covered ..................................................................
Care & Cleaning ...... ....................................................................
.... .
Save these instructions

not .

4 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
PLANNING ASSEMBLY
It will take two people about 35 minutes to complete the assembly process.
HH II JJ KK LL
Lounge Chairs
Part Description Quantity
AA BOLT CAP (M6) 61
BB BOLT (M6*20) 16
CC WASHER1 (φ6 *14) 16
DD BOLT CAP (M8) 16
EE BOLT (M8*45) 8
FF NUT (M8) 8
GG WASHER2 (M8) 16
HH WASHER3 (M8) 8
II NUT CAP (M8) 16
JJ RECTANGULAR STEEL PLATE 4
KK 1
LL 2
HEX WRENCH
SPANNER

5
PACKAGE CONTENTS
Love Seat
QQ
BB
AA
BB
AA CC
MM
NN OO PP
CC
Part Description Quantity
AA BOLT CAP (M6) 22
BB BOLT (M6*20) 12
CC
NUT (M6)
MM BOLT (M6*35) 2
NN BOLT (M6*45) 4
OO BOLT (M6*65) 4
PP 8
QQ
WASHER1 (φ6*14)
WASHER1 (φ6*14)
30
8
Part Description Quantity
AA BOLT CAP (M6) 16
BB 16
CC 16
Coffee Table
NUT CAP (M6)
BOLT (M6*20)

6
SEAT & BACK
SEAT & BACK
LEG-L
LEG
LEG-R
LEG
TABLE TOP
ARM CONNECT
SEAT CUSHION
SEAT CUSHION
OR BRACKET -1
ARM CONNECTOR BRACKET -2
E
H
ARM-L
ARM-R
ROCKER
LEG BRACE (SHOR T)
ARM BRACE (LONG)
I
J
J
I
M
L
A
A1
G
L
D
B
B1
G
H
EC
C1
M
F
A1
B1
C1
G
F
F
F
8
8
8
8
8
8
4 - Hardware Packs
4
4
4
4
4
4
4
4
4 - Hardware Packs
4
4
4 - Hardware Packs

7 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
1Attaching the legs
IMPORTANT: Do not fully tighten bolts until the end
of Step 2.
□
□Align arm connector bracket-1 (D) to the left leg (B).
□Repeat the above procedure to attach the right leg (C).
□Align arm connector bracket-2 (E) to the left leg (B).
□Secure connnector-2 to the leg with washer1 (CC) and
bolts (BB) using the hex wrench.
□Secure connnector-1 to the leg with washer1 (CC) and
bolts (BB) using the hex wrench.
□Clamp the seat & back (A) and arm connector bracket-2 (E )
together with rectangular steel plate (JJ).
□Secure the seat & back (A), arm connector bracket-2 (E )
and rectangular steel plate (JJ) with washer2 (GG) and
bolts (EE) from above the rectangular steel plate, and also
with washer2 (GG), lock washer3 (HH) and nuts (FF) from below
the steel plate with spanner (LL).
□Cover all bolts (BB) and (EE) with bolt caps (DD) and nut caps (II).
□Fully tighten all bolts (BB) and (EE) once all bolts are in place.
2Attaching the back panel
BB
AA
CC
BB
AA
CC
B
C
D
E
BB
AA
CC
EE
GG
GG
HH
FF
JJ
II
DD
E
II
DD
A

6
1
□Join the legs(G) with two leg braces (I) with bolts (BB) and
washers (CC).
□Attach the glider arm of the rocker (I) to the outside
of the chair base with washer (CC), bolt (OO) and
nut (PP) using spanner (LL) and hex wrench (KK).
2
Assemblethe chair base
and glider bearing arms
□
□Fully tighten all bolts and nuts once all bolts and nuts
are in place.
□Attach the back & seat (A1) to the armrest (B1) with washer (CC)
and bolt (BB) ,and bolt (MM) using the hex wrench (KK).
□
□Repeat the above procedure to attach the right armrest (C1).
3Joining the chair seat and the chair base.
□Firstly identify the front and back side of the assembled base.
□Fully tighten all bolts and nuts when all bolts and nuts are in place.
□Cover all bolts with bolt caps (AA), and cover all nuts (PP) with nut caps (QQ).
□Secure the armrests onto the glider bearing arm with washers (CC) and
bolts (NN) .
Attaching armrests
You will need at least two people for this step.
8
1
Align the arm brace (J) to the left armrest (B1), secure the arm
brace (J) to the left armrest (B1) with washers (CC) and bolts (BB).
AA
OO
CC
QQ
PP
CC
AA BB
CC
G
G
H
I
AA
NN
CC
QQ
PP
CC
AA
MM
CC
AA
BB
CC
AA
BB
CC
AA
BB
CC
J
C1
A1
B1

9 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
1Attaching table legs
□
□Align the table legs (M) to the table top.
□Secure the table legs (M) to the table top (L) with washers (CC) and bolts (BB)using the hex wrench.
□Fully tighten all bolts (BB) once all bolts are in place. Cover all bolts (BB) with bolt caps (AA).
(L)
L
M
AA
BB
CC

F
F
(F)

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
For certification use only
Factory Lounge Chair ID:MM21-03-LC
Factory Love seat ID:MM21-03-LS
Factory Coffee Table ID:MM21-03-CT