Foscam FI9928P User manual

FI9928P
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –15
Čeština
16 –28
Slovenčina
29 –41
Magyar
42 –54
Deutsch
55 –68

3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully
before first use and keep this user manual for future reference. Pay particular attention
to the safety instructions. If you have any questions or comments about the device,
please contact the customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7, www.alza.cz

4
Setting Up Your Foscam Security Camera
Getting Started
Package Contents
IP Camera
Power Adapter
Quick Setup Guide
Wi-Fi Antenna
Security Tips
•Please change the camera’s password regularly, using a combination of numbers,
letters and special characters.
•We recommend that you regularly update your camera with the latest available
software and firmware to ensure the best experience with your camera.
Physical Description
Antenna
LENS
Infrared LED
LED
Audio In/Out
Power
Alarm In/Out

5
Warning:
The cords on this product are a potential strangulation hazard. For child safety, please
keep these cords out of reach of children.
Setting up Your Camera: Wired Connection via the Foscam App
(Recommended)
Before You Get Started
Scan the QR code below to download and install the Foscam APP.
To ensure a smoother video experience on your smart phone, it is recommended that
your smart phone meet the following specifications:
•iOS: version 8.1 or higher.
•Android 4.1 or higher, using a device with a Graphics Processing Unit (GPU).
Note: For the best experience, please update the APP tot the latest version!
SD Card
Reset Button and the Indicator

6
Wired Connection
1. Please tighten the antenna clockwise and make sure it is in a vertical position.
2. Connect the camera to your router with an Ethernet cable.
3. Plug the power adapter into the camera, and then wait for about 1 minute.
4. Make sure your smart phone is connected to the same WiFi network as the
camera.
Tighten clocwise
Router

7
Tips: You need to connect to the 2.4GHz network if your WiFi router is dual-band-most
newer routers have both 2.4GHz and 5GHz channels. For example, choose SSID:
XXXXX_2.4G.
5. Open the foscam APP and please register a Foscam account, or sign in if you have
one already.
6. After logging into Foscam APP, select “Tap to add a camera” or “+” icon on the
upper right corner, then select “Scan the QR code” and scan the QR code that
labeled at the bottom of your camera.
7. There are two options in the following steps, please pay attention to choose the
corresponding adding method.
7.1 Please wait for a few seconds, you can tap “Configure WiFi” in “Configure WiFi”
interface, then select your WiFi network and enter your WiFi’s password. After, you can
set the camera name and tap “Save” in “Set name” interface.
Tap + icon
Select „Scan the
code“
Scan the QR code which is
located at the bottom of your
camera.

8
Note: It is strongly recommended that you choose to configure WiFi at this step.
7.2 Please wait for a few seconds, you can tap “Configure WiFi” in “Configure WiFi”
interface, then you tap “Skip” in the “WiFi Settings” interface. After, you can set the
camera name and tap “Save” in “Set Name” interface.
Configure WiFi
Select your WiFi Network
and enter your WiFi’s
password
Camera added
successfully and name
hase been set.
Configure WiFi
Tap „Skip“
Camera added successfully and
name has been set.

9
Note: If the adding process fails, please reset your camera and try adding again
according to the above method.
8. Tapping on the play button in the video box will jump to the “Camera Login”
setting interface. For security, please set a new username and password for your
camera before viewing live video.
9. After completing the above steps, you can begin using your camera.
Note: If you choose installation step 7.2, please refer to the following steps for
configuring WiFi. After setting your WiFi, you can unplug your network cable and the
camera works normally.
Reset Button
Tap
Set a new username and
password.

10
Configure WiFi
If you selected “Skip” in step 7, click play to enter the camera credential interface > Tap
the “ ” button > tap “WiFi Setting” > select your WiFi network and enter your WiFi’s
password. After setting up successfully, you can view live video without the Ethernal
cable.
¨
Other Ways to Access Your Camera
Foscam VMS
Foscam VMS is a new tool for PCs. It does not require plug-ins and is compatible with
Windows & Mac, supporting all Foscam HD cameras and up to 36 cameras at the same
time. If you would like to manage multiple cameras, we suggest you install Foscam VMS.
You can download the “Foscam VMS” Windows version from foscam.com/vms, and can
download the “Foscam VMS” Mac version from the APP store:
https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12
Note: For the best experience, please update Foscam VMS to the latest version!
Add the IP Camera
1. Run Foscam VMS, then create a local administrator account and login.
2. Tap the “+” icon on the Foscam VMS and follow the setup wizard to add your
camera.
Please visit foscam.com/downloads to view the user manual and for additional detailed
steps.
Tap
button
Select „WiFi Settings“
Select your WiFi Network
and enter your WiFi’s
password