Foscam C2M User manual

1
User
User Manual Manual
Indoor FHD IP Camera
Model: C2M
V3.0

2
Table of Contents
1 Overview............................................................................................................................................................................. 3
1.1 Key Features...........................................................................................................................................................3
1.2 Read before Use.................................................................................................................................................... 3
1.3 Packing Contents................................................................................................................................................... 3
1.4 Physical Description.............................................................................................................................................. 4
1.5 SD Card Management...........................................................................................................................................5
1.6 Add Device: Connection via the Foscam App................................................................................................... 5
1.7 Installation............................................................................................................................................................... 5
2 Default Parameters........................................................................................................................................................... 6
3 Specification....................................................................................................................................................................... 6

3
1 Overview
1.1 Key Features
2.0 Mega-Pixel
H.264+/H.264 video Compression
Supports 2.4GHz and 5GHz network
Supports Human detection, Motion Detection and Sound Detection
Compatible with free Foscam Video Management Software
Compatible with free Foscam iOS and Android APP
Supports Full Duplex two-way Audio
Supports voice prompt
Supports 256GB Micro SD Card storage(External)
IR Range up to 8m(26ft)
P2P Feature for Easy Remote Access
Supports image snapshot
Supports dual-stream
Supports remote viewing & record from anywhere anytime
Multi-level users management with password protection
Supports multiple network protocols: IP, TCP, UDP, SMTP, FTP, DHCP, RTSP
Supports Alexa
Supports Google Assistant
1.2 Read before Use
Please first verify that all contents received are complete according to the Package Contents listed below.
Before the Network Camera is installed, please carefully read and follow the instructions in the Quick Setup
Guide to avoid damage due to faulty assembly and installation. This also ensures the product is used properly
as intended.
1.3 Packing Contents
● Camera× 1
● Ethernet Cable× 1
● Quick Setup Guide × 1
● Expansion Screws× 1
● AC Adapter ×1
● Power Line ×1

4
1.4 Physical Description
Front panel Rear panel
Front panel:
Induction IC
LENS: Fixed focus lens
Microphone: Built-in microphone.
Micro SD Card slot: Supports up to 128GB SD card for storing the video.
Magnetic Bracket: Adsorbing on a ferromagnetic object using a magnet on the base
Rear panel:
Power Light: If the power supply works fine, the light will be on.
LAN: 10/100 Mbps RJ-45 port for wired connection
WPS/Reset
WPS: Push both WPS/Reset button on the camera and wireless router within 1 minute, the camera
will connect to the wireless router automatically, in WPS process, the Network light will blink every 0.4
seconds;
Reset: Push and hold the WPS/Reset button for more than 10 seconds to set the camera to factory
default, the Power light will blink every 0.4 seconds;
Power: DC 5V/1A Power supply.
The flashing status of the Power/Network light are shown in the following table.
Flashing Status
Description
Flashing(red) every 0.4 seconds
Reset to take effect
Constant Flash(green)
Wired connection
Slow Flash(green) every 1.0 second
Wi-Fi connected
Flashing every(green) 0.4 seconds
WPS is connecting
Flashing every(green) 0.2 seconds
EZLink takes effect

5
1.5 SD Card Management
This camera supports Micro SD Card.
When you plug in the SD card during the camera work process, please reboot the camera again, or else the
SD card might not work well.
On Foscam app go to the SettingsDevice StatusDevice Status page, you can see the SD card status.
1.6 Add Device: Connection via the Foscam App
Scan the QR code below to download and install the Foscam APP.
Please refer to the Quick Setup Guide.
1.7 Installation
Please refer to the Quick Setup Guide.
Step 1: Rotate the base of the camera until points a and b are aligned, this allows for the mounting plate
be removed.
Step2: Install the mounting plate on a wall or ceiling with supplied fixing screws.
Step3: Align points a and b to insert the camera base to the mounting plate. Rotate so that points a and b
no longer aligned, this attaches the camera securely to the base.

6
2 Default Parameters
Default network parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
3 Specification
ITEMS
C2M V6
Image Sensor
Sensor Type
High Definition Color CMOS Sensor
Display Resolution
2.0Megapixels(1920x1080)
Min. Illumination
0 Lux (With IR Illuminator)
Lens
Lens Type
f.2.8mm; F2.0
Angle of view
Diagonal: 108.8°, Horizontal: 98.2°, Vertical: 53.1°
Video
Image Compression
H.264+/H.264
Resolution
1080P(1920x1080) 25fps,720P(1280 x 720), VGA(640 x 480)
Stream
Dual stream
Image Adjustment
The brightness, contrast, saturation, sharpness are adjustable
Flip Image
Flip and mirror
Infrared Mode
Automatic or manual
Night Visibility
9pcs IR-LEDs, night vision range up to 8 metres
Audio
Input/Output
Supports Two-way Audio
Audio Compression
PCM/AAC
Network
Ethernet
One 10/100Mbps RJ45 port
Wireless Standard
2.4G/5G dual-band, IEEE802.11b/g/n/ac
Data Rate
IEEE802.11b: 11Mbps(Max.);
IEEE802.11g: 54Mbps(Max.);
IEEE802.11n: 150Mbps(Max.).
IEEE802.11ac: 433Mbps(Max.).
Wireless Security
WPA, WPA2
Wireless Setup
Supports QR Code+Wave wireless setup
Network Protocol
IP, TCP, UDP, SMTP, FTP, DHCP, RTSP
Remote Access
P2P
System
Requirements
Operating System
Microsoft Windows (Foscam VMS), MacOS (Foscam VMS), Android
(Foscam app), iOS (Foscam app)
Other Features
Motion Detection
Alarm via E-Mail, FTP and Foscam app when an event is detected
Sound Detection
Alarm via E-Mail, FTP and Foscam app when an event is detected

7
Human Detection
Alarm via E-Mail, FTP and Foscam app when an event is detected
WDR
Improve image clarity in complex scenario
Zoom
6X digital zoom function
User Accounts
Three levels user role
Storage
Support max. 256GB Micro SD card, local and FTP storage,Foscam
cloud storage
Intelligent Assistant
Supports Alexa, Google Assistant
Power
Power Supply
DC 5V/1A
Power Consumption
<4.8W
Physical
Color
Black/White
Dimension(mm)
70(L)*70(W)*120(H)mm
Net Weight
125g
Environment
Operating Temperature
-10°C ~ 40° (14°F ~ 104°F)
Operating Humidity
20% ~ 85% non-condensing
Storage Temperature
-20°C ~ 60° (-4°F ~ 140°F)
Storage Humidity
0% ~ 90% non-condensing
Certification
CE, FCC, RoHS,WEEE,RCM
For other parts, please refer to the “FOSCAM Camera User Manual”