Foscam B4 User manual

Security Camera B4
User Manual • Uživatelský manuál •
Užívateľský manuál • Használati utasítás •
Benutzerhandbuch

2
English
3 –26
Čeština
27 –50
Slovenčina
51 –74
Magyar
75 –98
Deutsch
99 –122

3
Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before
first use and keep this user manual for future reference. Pay particular attention to the safety
instructions. If you have any questions or comments about the device, please contact the
customer line.
✉www.alza.co.uk/kontakt
✆[phone]
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7, www.alza.cz

4
Safety Precautions
The camera is not intended for continuous 24/7 operation at full capacity or constant live
streaming. Its purpose is to capture motion events and provide live viewing remotely, but
only on-demand.
The camera's battery is built-in; please refrain from removing it.
Charge the rechargeable battery using a standard and high-quality DC 5V battery charger
or Foscam solar panel. Avoid using solar panels from other brands.
Charge the battery when the temperature is within the range of 0 °C to 45 °C. Always
utilize the battery when the temperature falls between -20 °C and 60 °C.
Ensure that the USB charging port remains dry, clean, and free of debris. When the
battery is fully charged, cover the USB charging port with the rubber plug.
Do not charge, use, or store the camera battery near any sources of ignition, such as fire
or heaters.
If the camera battery emits an odor, generates heat, becomes discolored, deformed, or
exhibits any abnormalities, cease using it immediately. Remove the battery from the
device or charger if it is being used or charged.
When disposing of the used battery, always adhere to local waste and recycling laws.
Before first use, please fully charge the battery.
For charging, utilize the included standard USB Type-C charging cable to avoid any
potential charging failures.

5
Adding Device: Recommended Connection Via The Foscam
App
Before You Get Started
To download and install the Foscam app on your device, simply scan the QR code provided
below. For iOS users, get it from the App Store, and for Android users, find it on Google Play.
For a smoother video experience on your smartphone, we advise ensuring that your device
meets the following specifications:
iOS: Version 11 or higher.
Android: Version 4.1 or higher, with a device equipped with a Graphics Processing
Unit (GPU).
Please note: To achieve the best experience, kindly update the app to its latest version!

6
Connection To Wi-Fi
1. Launch the Foscam app and either sign up for a Foscam account or log in if you already
have one.
2. Turn on the power switch to activate the camera.
Warning: After use, ensure to tightly close the
cover to prevent water leakage, which may
lead to camera failure.

7
3. Connect your mobile phone to the network.
4. Proceed with the following steps:
Tap to add a device
My Device
Add Device
Scan the QR code
Add Manually
Settings WLAN

8
Scan QR Code
Please scan the QR code that is
located on your device
Add Device
Add Device
To access the bottom of the camera,
open the silicone cover. Once its open,
please turn the bottom button in the
ON
I have heard “Waiting for Wi-Fi
configuration”
Make sure the indicator is flashing red
Camera flashes red
Next
Next

9
Important Notice: Ensure that the camera lens and the QR code are positioned at the same
level. Hold them steady for 5 to 10 seconds without any movement until you hear a prompt
saying "Wi-Fi connecting".
Wi-Fi Configuration
Add Device
Keep the device and mobile
phone close to the router
Confirm
Configure Wi-Fi Connection
Wi-FI Password
To configure Wi-Fi, simply point
the QR code directly at the device
Optimal distance between
devices is 10 to 15 cm

10
Wi-Fi Connection
To configure Wi-Fi, simply point
the QR code directly at the device
I have heard “Waiting for
Wi-Fi connecting”
Next
Add Camera
Connecting to Wi-Fi
Please do not exit this app or turn
off the device during connection
process (It requires approximately
2 minutes to complete)
Set Name
My Device
Device added successfully
Please set the device name:
Save
Garden
Garden