Fosmon 1x2 Splitter User manual

Thank you for purchasing this Fosmon product. For optimum performance and safety, please read this user manual
carefully before operating and keep it for future reference.
Fosmon’s 1x2 HDMI splitter allows you to split 1 HDMI input into 2 dierent outputs.
Package Includes
•1x HDMI 1x2 Splitter
•1x Power Adapter
• 1x User Manual
Product Diagram
Disclaimer Statement
We are not liable for any damage or destruction to personal properties that are contained inside or outside of the Fosmon
product.
Fosmon 1x2 HDMI Splitter w/ US AC Adapter
(4k*2k@30Hz, Supports 3D)
Power LED LED of HDMI INPUT
Game Consoles 4KTV/HD TV
4KTV/HD TV
Streaming Devices/
Blu-Ray Players
LED of HDMI 1 OUTPUT LED of HDMI 2 OUTPUT
Power Supply Socket HDMI INPUT
2 OUTPUTS1 INPUT
HDMI 1 OUTPUT HDMI 2 OUTPUT
OUTPUT 2OUTPUT 1
INPUTDC 5V
1 x2 SPLITTER
Installation and Safety Precautions
• Cables must be placed well, where it would not be stepped on or pinched. Make sure cables are fully inserted into ports.
• To provide sucient ventilation during use, make sure there is at least 1 inch of clearance on each side of the device
(except the side where it rests on a at surface).
• Do not set up this product adjacent to a water source or an environment that has excessive moisture.
• Do not operate the product when hands are wet.
• Place this product on a at surface and keep it out of reach of children.
• Unplug the product when it is not in used for an extended period of time.
• Do not attempt to dismantle the product on your own.
How to Connect
1. Connect power adapter to outlet and the other end into HDMI splitter
2. Connect input device HDMI cable into input port
3. Connect output device HDMI cable to output port

Specications
Follow Us On Social Media Limited Lifetime Warranty
Recycling the Product
FCC Information
This Fosmon product includes a limited lifetime warranty.
Please visit our Fosmon website for more details.
www.fosmon.com
[email protected]
© 2018 Fosmon Technology All rights reserved.
To dispose this product properly, please follow
the recycling process regulated in your area.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
DO NOT RETURN THE PRODUCT
There are good days and there are bad days. It is our BAD if the
product is not working, or if you are not happy with it. PLEASE
GIVE US A CHANCE and WE WILL MAKE IT RIGHT.
1-833-3-Fosmon (833-336-7666)
[phone]
[email protected]
HDMI x 1
HDMI x 2
4K x 2K @30Hz
HDCP 1.3
1.4a
DTS-HD, Dolby-trueHD, LPCM7.1,
DTS, Dolby-AC3, DSD
≤50ft/15m AWG24 HDMI standard
cable
32°F to 104°F / 0°C to 40°C
5% to 90% RH (No Condensation)
Audio and Video Environmental
Input
Output
Resolution
HDCP Version
HDMI Version
Up to 48-bit deep colorColor Depth
5 volts p-p ( TTL)
0.5-1.0 volts p-p
Input DDC Signal
Input Video Signal
Audio Format
Input Cable Recommendation
Operating Temperature Range
Operating Humidity Range
Optional Power Support (cable
not included)
2.8 x 2.4 x 1in / 71 x 61 x 25mm
4.51oz / 128g
Mechanical
Micro USB Port
Dimension (L x W x H)
Weight
Troubleshooting
Issue Possible Solution
No Power 1. If the connected HDMI device does not supply enough power to the splitter, please use the provided power adapter.
No Audio or Bad
Quality Audio
1. Check if the audio equipment is on.
2. Check if the input source is on.
3. Check if the input source audio output setting is set up correctly. Please refer to your input source user manual
on how to change this setting.
4. Check all cables and make sure they are fully seated into ports.
5. Try changing to a dierent known good cable.
No Video or Bad
Quality Video
1. Check if the display is on.
2. Check if the input source is on.
3. Check all cables and make sure they are fully seated into ports.
4. Try changing to a dierent known good cable.