Foss Kjeltec 8100 User manual

Kjeltec™ 8100/8200 Distillation Unit
Quick Guide 6006 3343 / Rev. 3
Please read safety precautions and warranty statement in the User Manual prior to use.
Before operating the instrument, ensure that the instrument and all external equipment are
installed and connected according to the User Manual.
Note that your installation may differ from the one described.
Copyright 2014 / All rights reserved
FOSS Analytical Co., Ltd., 6 Louyang Road, Building 1, 215121, SIP, Suzhou, P.R. China
Tel Int [phone], Fax [phone], E-mail i[email protected]
Quick Guide
Kjeltec™ 8100/8200
Distillation Unit
6006 3343 / Rev. 3
Maintenance
Note: A convenient way to obtain regular FOSS service visits is to sign up for a
FossCare support plan, including regular preventive maintenance by well trained
and certified engineers.
Maintenance Intervals*)
Maintenance D W 1-3 M Add. Y
Steam Cleaning X
Cleaning of Drip Tray, Tube Support and Safety Door X
Cleaning of Tube Adapter X
Cleaning from Spillage X
Check of Sample Racks X
Check of Safety Functions X
Check of Reagent Tanks X
Check of Digestion Tubes X
Cleaning of Alkali Pump X
Cleaning of Splash Head X
Cleaning of Receiver Solution Dispensing System X
Check of Tube Adapter X
Cleaning of Steam Generator X
FOSS Service Visit X
*) D:Daily
W: Weekly
1-3 M: Every 1-3 Months
Add.: Additional Maintenance
Y:Yearly

Quick Guide 6006 3343 / Rev. 3
Kjeltec™ 8100/8200 Distillation Unit
Quick Guide 6006 3343 / Rev. 3
Kjeltec™ 8100/8200 Distillation Unit
User Interface
Fig. 1:1 Menu system and display icons
Workflow
1) Only required prior to first analysis.
Action Section
Check/Prepare the samples in the rack(s) 1) -
Check the Cooling Water Supply 1) -
Kjeltec™ 8100: Check Alkali- and Water Tank 1)
Kjeltec™ 8200: Check Alkali-, Receiver- and Water Tank 1) -
Check the Waste Tank (if used) 1) -
Check Priming of Pumps 1) 4.9
Select a Program 1) 4.5
Load a Test Tube and put the Receiver Flask in the instrument -
As an option, Edit the selected program 4.7.1
Press the Start key to initiate the analysis 4.4
During analysis the user can View the progress 4.5.2
After all samples are analysed, perform maintenance. 5
8000509a
Analyse Settings ManualHistory
- Door
- Dilution
- Alkali
- Receiver
- Tube Drain
- Steam
- Program editor
- Date/Time
- Contrast
- Language
- Dilution pump cal.
- Level warning
- Steam Standby
- View history- Select program
- View program
- Start
- Stop
Menu labels Navigation and Analysis
keys
Analyse Up
History Down
Settings Start
Manual Stop
Status and Event Icons
Notice Warning
Canceled Error