Powerfiller POWERFILLER 4 User manual

ELECTRIC CIGARETTE INJECTOR
USER MANUAL: POWERFILLER 4
English | Deutsch | Francais | Espanol

Yeah -have fun with your Powerller machine -it's fantastic
that you chose a machine from our range.
Please follow the operating and care instructions to ensure
an optimal lling result for as long as possible.
Page 02

1.) Powerller 4 -Electric Cigarette Injector
2.) Collecting Tray
3.) Metal Cleaning Pin
4.) Cleaning Brush
5.) Tobacco Stuer
6.) Power Cord
The delivery package will consist of the following:
Page 03
DELIVERY SCOPE

Page 04
Plug the machine into the power supply
using the power supply unit -the green
light indicates that the machine is ready.
Step 1:
Fully move the lever upwards to open
the tobacco compartment -then put a
cigarette tube onto the metal device.
Step 2:
Fill the tobacco compartment lightly with
tobacco.
Step 3:
Compress the tobacco in the chamber
using the tobacco stuer.If you stu too
rmly,the machine is unable to produce
the cigarette and will not produce a
good stung result.
Step 4:
USER GUIDE

Gently move the lever all the way down
to start the stung process and start
lling the cigarette tube with tobacco.
Step 5:
Et voilà -the completed cigarette drops
into the collecting tray and the stung
procedure is nished.
Step 6:
Page 05
Enjoy your cigarette and keep in mind to take care of
your machine.
Use the black metal pin to clean the
tobacco compartment from the outside
and remove solid tobacco residue in the
chamber.
Step 7:
Using the brush, thoroughly remove any
remaining tobacco residue.
Step 8:
USER GUIDE